ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

lukestafford77 · 7 April 2016, 07:15 PM

Hello Everyone,

I would like to get my GMT PVD plated and wondered if anyone had any experience with this, or if there is somebody you may all be able to suggest.

Thanks in advance.

Jack T · 7 April 2016, 07:18 PM

This should elicit some interesting responses.

SC11 · 7 April 2016, 07:38 PM

Rolex or AP?

Haven't you asked the same question over on TZUK for an AP?

Anyways the only two companies I see that come recommended are ABC in LA (who I believe only offer limited DLC work watch head etc not complete works due to quality control) or IWW

Both US based, for UK you'll have to look at Titan Black or similar but when I looked into this it was at least double the cost compared to the above places.

japenney · 7 April 2016, 07:54 PM

My most sincere condolences for the loss of your GMT.

SSdayton · 7 April 2016, 07:56 PM

Hi, I personally wouldn't as I have seen a few after a couple of years look worn with scratches.. The pvd coating is resistant but not entirely as it does wear.. So depends how often you will wear it and how much it is exposed to certain conditions/environment.

Titan black is just one company to check

But also try bamfordwatches (you can see their work on Instagram)

Keep us posted either way and good luck

GolfPunk · 7 April 2016, 08:23 PM

Quote:

Originally Posted by lukestafford77

Hello Everyone,

I would like to get my GMT PVD plated and wondered if anyone had any experience with this, or if there is somebody you may all be able to suggest.

Thanks in advance.

Contact Luke Waite on 07876 737373 at www.titanblack.co.uk based in London and a very professional set up.

adamalfie · 7 April 2016, 09:07 PM

Quote:

Originally Posted by japenney

My most sincere condolences for the loss of your GMT.

Etschell · 7 April 2016, 10:13 PM

why not just buy a bamford?

SSDAYTONAHULK · 7 April 2016, 10:27 PM

Maybe you should just plasti dip your watch first to see if you like it? Lol

brettpaul · 7 April 2016, 11:01 PM

Quote:

Originally Posted by SC11

Rolex or AP?

Haven't you asked the same question over on TZUK for an AP?

Anyways the only two companies I see that come recommended are ABC in LA (who I believe only offer limited DLC work watch head etc not complete works due to quality control) or IWW

Both US based, for UK you'll have to look at Titan Black or similar but when I looked into this it was at least double the cost compared to the above places.

These are the best options as Sam has pointed out!

lukestafford77 · 8 April 2016, 06:52 PM

Cheers for all your input guys. So far I am in talks with Jack from IWW who seems very compotant.

Jason71 · 8 April 2016, 09:03 PM

Don't listen to these responses. If you want it done....get it done. Jack@IWW did mine SEVERAL years ago. I dive with mine and wear it EVERYWHERE. The finish is holding-up EXTREMELY well.

THC · 8 April 2016, 09:11 PM

Said this on another post last week...

Somewhere an angel just lost it's wings

7 April 2016, 07:15 PM	#1
lukestafford77 "TRF" Member Join Date: Apr 2013 Real Name: Luke Location: London Posts: 59	Custom PVD Plating a Rolex Hello Everyone, I would like to get my GMT PVD plated and wondered if anyone had any experience with this, or if there is somebody you may all be able to suggest. Thanks in advance.

7 April 2016, 07:18 PM	#2
Jack T "TRF" Member Join Date: May 2013 Real Name: Jack Location: The Triangle Watch: Several Posts: 6,719	This should elicit some interesting responses. __________________ Sub 116613 LN; GMT 116710 LN; Sinn 104R; Exp 214270; GS SBGM221; Omega AT

7 April 2016, 10:13 PM	#8
Etschell "TRF" Member Join Date: Dec 2013 Location: FL Watch: platinum sub Posts: 15,884	why not just buy a bamford? __________________ If you wind it, they will run. 25 or 6 to 4.

8 April 2016, 09:03 PM	#12
Jason71 "TRF" Member Join Date: Mar 2009 Real Name: Jason Location: USA Watch: Rolex/Tudor Divers Posts: 7,973	Don't listen to these responses. If you want it done....get it done. Jack@IWW did mine SEVERAL years ago. I dive with mine and wear it EVERYWHERE. The finish is holding-up EXTREMELY well. __________________ Best Regards, Jason Just Say "NO" to Polishing Card-Carrying Member of the Global Association of Retro-Grouch Curmudgeons LIfe is too short to wear inexpensive watches PLEXI IS SEXY

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

7 April 2016, 07:38 PM	#3
SC11 Banned Join Date: Jul 2010 Real Name: Sam Location: UK Watch: AP ☠️ Posts: 6,151	Rolex or AP? Haven't you asked the same question over on TZUK for an AP? Anyways the only two companies I see that come recommended are ABC in LA (who I believe only offer limited DLC work watch head etc not complete works due to quality control) or IWW Both US based, for UK you'll have to look at Titan Black or similar but when I looked into this it was at least double the cost compared to the above places.

7 April 2016, 07:54 PM	#4
japenney "TRF" Member Join Date: Apr 2013 Real Name: Josh Location: Canada Watch: undecided Posts: 4,777	My most sincere condolences for the loss of your GMT.

7 April 2016, 07:56 PM	#5
SSdayton "TRF" Member Join Date: Feb 2012 Location: UK LONDON Posts: 134	Hi, I personally wouldn't as I have seen a few after a couple of years look worn with scratches.. The pvd coating is resistant but not entirely as it does wear.. So depends how often you will wear it and how much it is exposed to certain conditions/environment. Titan black is just one company to check But also try bamfordwatches (you can see their work on Instagram) Keep us posted either way and good luck

7 April 2016, 10:27 PM	#9
SSDAYTONAHULK "TRF" Member Join Date: Jun 2015 Real Name: KIRBY Location: USA Watch: Patek 5980/1A Posts: 132	Maybe you should just plasti dip your watch first to see if you like it? Lol

8 April 2016, 06:52 PM	#11
lukestafford77 "TRF" Member Join Date: Apr 2013 Real Name: Luke Location: London Posts: 59	Cheers for all your input guys. So far I am in talks with Jack from IWW who seems very compotant.

8 April 2016, 09:11 PM	#13
THC 2024 SubLV41 Pledge Member Join Date: Jun 2013 Real Name: Tom Location: Mandeville La Watch: 126333 Posts: 10,666	Said this on another post last week... Somewhere an angel just lost it's wings

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)