ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

wahuwa73 · 13 August 2016, 08:05 AM

Hi guys,
I have a GMT II Pepsi Sophia Loren to which I've replaced the original oyster bracelet with a RUBBERB silicone strap and a used Fliplock clasp. Recently, the pin and rivet that connect the Fliplock to the clasp and SS link came apart. Rolex won't repair it. Arghh!
Anyone know of a source for a pin with rivet that will fit my 93250?

Thanks!

Tools · 13 August 2016, 09:56 AM

A rivet is simply a stainless steel rod with the ends hammered over.

Almost any jewelry repair shop can fix this for you.

crowncollection · 13 August 2016, 10:29 AM

Quote:

Originally Posted by wahuwa73

Hi guys,

I have a GMT II Pepsi Sophia Loren to which I've replaced the original oyster bracelet with a RUBBERB silicone strap and a used Fliplock clasp. Recently, the pin and rivet that connect the Fliplock to the clasp and SS link came apart. Rolex won't repair it. Arghh!

Anyone know of a source for a pin with rivet that will fit my 93250?

Thanks!

These are aftermarket but do the job

http://m.ebay.com.au/itm/36X-RIVET-P...ATCHING_ACTIVE

Sent from my iPhone using Tapatalk

wahuwa73 · 13 August 2016, 11:21 PM

Thanks for the pin info. Just what I need

strafer_kid · 15 August 2016, 07:56 AM

Yes Rolex seem to go for the 'replace the entire clasp' option rather than a repair. Happened me a while back with a GMT - replacement pin was an easy fix for watch maker and possibly even better than the original!

bmdaia · 3 September 2016, 06:37 AM

JJ at Fair Oaks Mall in Fairfax did mine for $30 in five minutes. Indeed does look more "solid" than the original. This foolish rivet is indeed the bracelet's weakest "link".

13 August 2016, 08:05 AM	#1
wahuwa73 "TRF" Member Join Date: Jul 2014 Location: Manchester, MA Watch: GMT II 16760 Posts: 4	Replacement rivet pin for a 93250 Fliplock? Hi guys, I have a GMT II Pepsi Sophia Loren to which I've replaced the original oyster bracelet with a RUBBERB silicone strap and a used Fliplock clasp. Recently, the pin and rivet that connect the Fliplock to the clasp and SS link came apart. Rolex won't repair it. Arghh! Anyone know of a source for a pin with rivet that will fit my 93250? Thanks!

13 August 2016, 09:56 AM	#2
Tools TRF Moderator & 2024 SubLV41 Patron Join Date: May 2007 Real Name: Larry Location: Mojave Desert Watch: GMT's Posts: 43,515	A rivet is simply a stainless steel rod with the ends hammered over. Almost any jewelry repair shop can fix this for you. __________________ (Chill ... It's just a watch Forum.....) NAWCC Member

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

13 August 2016, 11:21 PM	#4
wahuwa73 "TRF" Member Join Date: Jul 2014 Location: Manchester, MA Watch: GMT II 16760 Posts: 4	Thanks for the pin info. Just what I need

15 August 2016, 07:56 AM	#5
strafer_kid "TRF" Member Join Date: Oct 2009 Real Name: Kenny Location: northern ireland Watch: SDs, Subs & GMTs Posts: 5,136	Yes Rolex seem to go for the 'replace the entire clasp' option rather than a repair. Happened me a while back with a GMT - replacement pin was an easy fix for watch maker and possibly even better than the original!

3 September 2016, 06:37 AM	#6
bmdaia "TRF" Member Join Date: Jun 2013 Location: Northern Virginia Posts: 29	JJ at Fair Oaks Mall in Fairfax did mine for $30 in five minutes. Indeed does look more "solid" than the original. This foolish rivet is indeed the bracelet's weakest "link".

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)