ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

wingman9x · 30 August 2016, 02:54 AM

a question guys regarding the bezel of the deepsea...just found that the bezel when pressed down does play a little bit by around 2 to 3mm on all sides. is this normal?

thank you in advance for the answers!

Hooper · 30 August 2016, 02:59 AM

From what I understand it is completely normal. All moveable bezels have some play! Of course, if you are unsure that the amount of play is abnormal, take to your Ad for inspection

speedmaster73 · 30 August 2016, 03:17 AM

Quote:

Originally Posted by wingman9x

a question guys regarding the bezel of the deepsea...just found that the bezel when pressed down does play a little bit by around 2 to 3mm on all sides. is this normal?

thank you in advance for the answers!

completely normal

dilip · 30 August 2016, 03:22 AM

My subs bezel has approx one mm of play, but three mm sounds like a gap. Do you have any pictures?

Passionata · 30 August 2016, 05:08 AM

You mean horizontally right?

sco · 30 August 2016, 05:12 AM

Yes, it's normal. The ceramic bezels "float" on three ball bearings and they all have some give to them.

TonyD · 30 August 2016, 06:02 AM

I think some of us have a different concept of a mm.

Sorry, the Engineer in me wanted to get this right.

I measured my recently acquired DSSD Blue with a caliper and it moves 0.25mm.

I also tried to measure the "gap" between the bezel and the case, the place where fine sand can get in. I only have some feeler stock to try. The .125mm (0.005") slides in and the 0.20 (0.0075") does not. So the gap is somewhere around there.

Dirt · 30 August 2016, 09:23 AM

Quote:

Originally Posted by TonyD

I think some of us have a different concept of a mm.

Sorry, the Engineer in me wanted to get this right.

I measured my recently acquired DSSD Blue with a caliper and it moves 0.25mm.

I also tried to measure the "gap" between the bezel and the case, the place where fine sand can get in. I only have some feeler stock to try. The .125mm (0.005") slides in and the 0.20 (0.0075") does not. So the gap is somewhere around there.

Yeah.
If he's got 2-3 Mil, then there's a serious problem with his watch

Personally I never measured it but I always thought it was somewhere in the vicinity of <0.010".
Thanks for taking the time to gauge it

wingman9x · 30 August 2016, 11:40 AM

thank you everyone. yes i doubled check the play and it is below 1mm. just wanted to make sure that it does play because i was quite surprised when i was able to press the bezel downwards while i was taking it out from a winder.

thanks again guys for your help and cheers!

wingman9x · 30 August 2016, 11:43 AM

i also have a gmt II c and i tried to check if its bezel will play or press down a bit...but it doesn't. does this kind of play only exists on the deepsea?

thanks again in advance!

DarthSimon · 1 September 2016, 10:43 AM

The play is totally normal, u can literally push the bezel down on the DeepSea. My last one and current one both did this... I almost feels like a click, I was told there are ball bearings inside that create the gap, also it's part of ring lock system...

Sent from my SM-N920V using Tapatalk

30 August 2016, 02:54 AM	#1
wingman9x "TRF" Member Join Date: Dec 2008 Location: Nakano Watch: white daytona Posts: 72	Question Regarding Deepsea Bezel a question guys regarding the bezel of the deepsea...just found that the bezel when pressed down does play a little bit by around 2 to 3mm on all sides. is this normal? thank you in advance for the answers!

30 August 2016, 02:59 AM	#2
Hooper "TRF" Member Join Date: Mar 2010 Real Name: Tony Location: Ontario, Canada Watch: 16610 Posts: 3,290	From what I understand it is completely normal. All moveable bezels have some play! Of course, if you are unsure that the amount of play is abnormal, take to your Ad for inspection __________________ “LIfe’s Journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting “Holy shit, what a ride!” – Hunter S Thompson

30 August 2016, 05:08 AM	#5
Passionata "TRF" Member Join Date: Mar 2011 Location: N/A Watch: the girls Posts: 7,095	You mean horizontally right? __________________ Best George "Also remember that feet don't get fat and a watch will always speak volumes." Robert Johnston --------------------- newhttps://youtu.be/EljAF-uddhE new http://youtu.be/ZmpLoO1Q8eQ IG @passionata1

30 August 2016, 06:02 AM	#7
TonyD 2024 Pledge Member Join Date: Jan 2008 Real Name: Tony Location: Boston North Watch: Meteorite Daytona Posts: 1,471	I think some of us have a different concept of a mm. Sorry, the Engineer in me wanted to get this right. I measured my recently acquired DSSD Blue with a caliper and it moves 0.25mm. I also tried to measure the "gap" between the bezel and the case, the place where fine sand can get in. I only have some feeler stock to try. The .125mm (0.005") slides in and the 0.20 (0.0075") does not. So the gap is somewhere around there. __________________ Pepsi GMT/SD43/DSSD Blue/ DJ41 TT Rose Diamond Dial/ Daytona Meteorite/ SS Sky Dweller White Dial/ IWC Bronze Big Pilot/ Aquanautic Super King / Omega Ploprof 1200 / Graham Scarab Diver

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

30 August 2016, 03:22 AM	#4
dilip "TRF" Member Join Date: Oct 2013 Location: Sweden Posts: 77	My subs bezel has approx one mm of play, but three mm sounds like a gap. Do you have any pictures?

30 August 2016, 05:12 AM	#6
sco "TRF" Member Join Date: Dec 2013 Location: Chicago Watch: Subc AT 8500 CSO Posts: 3,646	Yes, it's normal. The ceramic bezels "float" on three ball bearings and they all have some give to them.

30 August 2016, 11:40 AM	#9
wingman9x "TRF" Member Join Date: Dec 2008 Location: Nakano Watch: white daytona Posts: 72	thank you everyone. yes i doubled check the play and it is below 1mm. just wanted to make sure that it does play because i was quite surprised when i was able to press the bezel downwards while i was taking it out from a winder. thanks again guys for your help and cheers!

30 August 2016, 11:43 AM	#10
wingman9x "TRF" Member Join Date: Dec 2008 Location: Nakano Watch: white daytona Posts: 72	i also have a gmt II c and i tried to check if its bezel will play or press down a bit...but it doesn't. does this kind of play only exists on the deepsea? thanks again in advance!

1 September 2016, 10:43 AM	#11
DarthSimon "TRF" Member Join Date: Jan 2015 Location: North East Watch: DD.Daytona.SD.Subs Posts: 568	The play is totally normal, u can literally push the bezel down on the DeepSea. My last one and current one both did this... I almost feels like a click, I was told there are ball bearings inside that create the gap, also it's part of ring lock system... Sent from my SM-N920V using Tapatalk

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)