ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Flier · 4 April 2018, 10:23 PM

Hi
Cant seem to be able to get the bezel to allign with the 12 o’ clock point
Any thoughts

https://postimg.org/gallery/2v8r18fcs/

Thanks

jrs146 · 4 April 2018, 10:26 PM

Is there any wiggle room in-between clicks? I’ve owned subs before where to get it to align perfect it needed a tiny twist after the click. Just a hair and it would align.

Sent from my iPhone using Tapatalk

Flier · 4 April 2018, 10:28 PM

Yes but then the 15 and 45 minute lines will not allingn with the bezel 15/45

Flier · 4 April 2018, 10:29 PM

Btw the watch was bought brand new from an AD

Yobber76 · 4 April 2018, 10:32 PM

Mine has 1/2 clicks and a slight wiggle that allows me to hit the 12 o'clock

Flier · 4 April 2018, 10:33 PM

But do the 15/45 allign once you do that?

jrs146 · 4 April 2018, 10:39 PM

Quote:

Originally Posted by Flier

But do the 15/45 allign once you do that?

Yes after the wiggle they all do for me.

Quote:

Originally Posted by Yobber76

Mine has 1/2 clicks and a slight wiggle that allows me to hit the 12 o'clock

That’s exactly what I’ve done.

Sent from my iPhone using Tapatalk

Flier · 4 April 2018, 10:44 PM

https://postimg.org/image/tog03u7gb/
12 o clock allignment
45 second alligns with inner
15 does not
Should I start calling for warranty issue?

TarponGeorge · 4 April 2018, 10:45 PM

That’s a QC issue. I would want it adjusted. That’s why I prefer the older aluminum bezels, as you can adjust the alignment yourself with a simple 2-minute DIY procedure. I did it on my 14060M.

WatchOut4It · 4 April 2018, 10:48 PM

It doesn’t look off to me, but I’m also factoring in a little parallax forgiveness given the picture isn’t taken straight on. This type of issue is ultimately a personal one. I wouldn’t bother having the watch worked on (and risk a new problem being introduced) for something so minor. But what’s minor to me may be significant to you...

JWSubC1911 · 4 April 2018, 10:49 PM

Bezel alignment (or misalignment) on the ceramic subs has been a topic I’ve seen discussed on forums and YouTube more than a few times. It’s not extremely uncommon to see a slight misaligned bezel insert. Is it a warranty issue? I saw one video where a guy had his fixed by the RSC, but it took multiple tries to get it done right. If you live nearby a RSC and can walk in, give it a shot. If you’re going to be mailing it in, it might takes months and multiple trips to get it right.

Sent from my iPad using Tapatalk

siempreko · 4 April 2018, 10:54 PM

If it bothers you, then send it in. They will be happy to fix it!

Flier · 4 April 2018, 10:54 PM

Quote:

Originally Posted by JWSubC1911

Bezel alignment (or misalignment) on the ceramic subs has been a topic I’ve seen discussed on forums and YouTube more than a few times. It’s not extremely uncommon to see a slight misaligned bezel insert. Is it a warranty issue? I saw one video where a guy had his fixed by the RSC, but it took multiple tries to get it done right. If you live nearby a RSC and can walk in, give it a shot. If you’re going to be mailing it in, it might takes months and multiple trips to get it right.

Sent from my iPad using Tapatalk

I guess small things give the watch a personality
But it does not justify the fact that Rolex is not doing a proper job
Because once I take into consideration the watch is not keeping 48 hrs reserve plus now the allignment , I start fallng out of love with them very quick once I remember the price

Benjo74 · 4 April 2018, 10:58 PM

I have the same issue on my 2017 Sub LV. It does bother me, but not enough to send it back for repair under warranty. The prospect of 3 months (or whatever) without my watch as well as the risk that they still might get it wrong (as someone said above) puts me off.

However, it does bug me that a Rolex would have such a flaw. Especially as my Black Bay aligns perfectly. It seems like something they just should not be getting wrong.

Sent from my iPhone using Tapatalk

Flier · 4 April 2018, 10:59 PM

This

kauffee · 4 April 2018, 11:06 PM

Quote:

Originally Posted by Flier

https://postimg.org/image/tog03u7gb/
12 o clock allignment
45 second alligns with inner
15 does not
Should I start calling for warranty issue?

This looks perfect to me. The inserts are machine made so if it’s aligned at 12 it’s aligned at the 15 and 45 too. What you’re seeing is the effect of parallax. Also, close one eye when you look.

Yours is exactly like mine. If I rotate it clockwise the 12 is a little before the mark like your first pic. However I find that if I just naturally spin it and stop on 12 it’s right on. Which makes me think this is how it’s supposed to be. But during the day it can drift forward or back slightly. Just the nature of how the Mechanism is designed with some float between the clicks.

Flier · 4 April 2018, 11:09 PM

Interesting
Thanks

Anson880621 · 4 April 2018, 11:09 PM

My LV has the same issue but I don't think it's really matter

samson66 · 4 April 2018, 11:14 PM

Used to drive me crazy on my 16710. It was right in between two clicks and my OCD made me sort of balance it between the two clicks and hope it would stay there for an extended time.

Got lucky on both my SD43 and Black Bay - both lined up perfectly (whew!)

Flier · 4 April 2018, 11:44 PM

I blame It on OCD for my case also

TarponGeorge · 5 April 2018, 01:31 AM

Quote:

Originally Posted by samson66

Used to drive me crazy on my 16710. It was right in between two clicks and my OCD made me sort of balance it between the two clicks and hope it would stay there for an extended time.

Got lucky on both my SD43 and Black Bay - both lined up perfectly (whew!)

On the 16710, you could have fixed it yourself in about 90 seconds. Very easy diy fix.

samson66 · 5 April 2018, 01:33 AM

Quote:

Originally Posted by TarponGeorge

On the 16710, you could have fixed it yourself in about 90 seconds. Very easy diy fix.

Yeah I know, remove the bezel and shift the insert slightly. I was scared to death I would scratch the watch so I never pulled the bezel.

Sent from my Samsung Galaxy S7 Edge using Tapatalk

drm20 · 5 April 2018, 03:19 AM

I had a similar problem with my last 114060. It drove me nuts so I ended up sending it to RSC Dallas. They adjusted it (under warranty). I know, ocd, can't help it.

liuk3 · 5 April 2018, 03:28 AM

I had the RSC align my bezel on my DSSD while I waited under warranty. Have the RSC align it for you.

diewithme · 5 April 2018, 03:42 AM

Sorry friend, same here on my TT sub. Brought back to AD, better now, but still not centered, no matter what i do. (Also 45/markings off). Its heavy shit that QC by Rolex is up not best standard and also service server did their job about 50% max..
I have 5 warranty so maybe i ll try another shot again later..

Chadridv · 5 April 2018, 03:45 AM

I brought my LVC in for another issue, and mentioned the misalignment while I was there. I was told it shouldn't be like that and they fixed it under warranty.

4 April 2018, 10:23 PM	#1
Flier Banned Join Date: Dec 2017 Location: Cy Watch: ROLEX Posts: 516	Bezel allignment Hi Cant seem to be able to get the bezel to allign with the 12 o’ clock point Any thoughts https://postimg.org/gallery/2v8r18fcs/ Thanks

4 April 2018, 10:26 PM	#2
jrs146 "TRF" Member Join Date: Aug 2011 Real Name: Josh Location: Lost in time Watch: Me Nae Nae Posts: 9,823	Is there any wiggle room in-between clicks? I’ve owned subs before where to get it to align perfect it needed a tiny twist after the click. Just a hair and it would align. Sent from my iPhone using Tapatalk __________________ "Sometimes the songs that we hear are just songs of our own." -Jerome J. Garcia, Robert C. Hunter

5 April 2018, 03:28 AM	#24
liuk3 "TRF" Member Join Date: Dec 2011 Location: Los Angeles Posts: 3,354	I had the RSC align my bezel on my DSSD while I waited under warranty. Have the RSC align it for you. __________________ "Appreciate your life!"

5 April 2018, 03:45 AM	#26
Chadridv 2024 Pledge Member Join Date: Oct 2014 Real Name: Chadri Location: LI, NY Watch: 116610LV Posts: 11,357	I brought my LVC in for another issue, and mentioned the misalignment while I was there. I was told it shouldn't be like that and they fixed it under warranty. __________________ - i͞n͟s͞t͟a͞g͞r͟a͞m͞ @ⓒⓄⓁⒹⓒⒶⓈⒺⓦⒶⒶⓉⒸⒽⒺⓈ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

4 April 2018, 10:28 PM	#3
Flier Banned Join Date: Dec 2017 Location: Cy Watch: ROLEX Posts: 516	Yes but then the 15 and 45 minute lines will not allingn with the bezel 15/45

4 April 2018, 10:29 PM	#4
Flier Banned Join Date: Dec 2017 Location: Cy Watch: ROLEX Posts: 516	Btw the watch was bought brand new from an AD

4 April 2018, 10:32 PM	#5
Yobber76 2024 SubLV41 Pledge Member Join Date: Jan 2018 Real Name: Mike Location: Illinois Watch: BLNR VTNR PAM 915 Posts: 1,986	Mine has 1/2 clicks and a slight wiggle that allows me to hit the 12 o'clock

4 April 2018, 10:33 PM	#6
Flier Banned Join Date: Dec 2017 Location: Cy Watch: ROLEX Posts: 516	But do the 15/45 allign once you do that?

4 April 2018, 10:44 PM	#8
Flier Banned Join Date: Dec 2017 Location: Cy Watch: ROLEX Posts: 516	https://postimg.org/image/tog03u7gb/ 12 o clock allignment 45 second alligns with inner 15 does not Should I start calling for warranty issue?

4 April 2018, 10:45 PM	#9
TarponGeorge Banned Join Date: Mar 2018 Location: Southern US Posts: 112	That’s a QC issue. I would want it adjusted. That’s why I prefer the older aluminum bezels, as you can adjust the alignment yourself with a simple 2-minute DIY procedure. I did it on my 14060M.

4 April 2018, 10:48 PM	#10
WatchOut4It "TRF" Member Join Date: Jan 2015 Location: CONUS Posts: 728	It doesn’t look off to me, but I’m also factoring in a little parallax forgiveness given the picture isn’t taken straight on. This type of issue is ultimately a personal one. I wouldn’t bother having the watch worked on (and risk a new problem being introduced) for something so minor. But what’s minor to me may be significant to you...

4 April 2018, 10:49 PM	#11
JWSubC1911 Banned Join Date: Dec 2017 Location: USA Posts: 52	Bezel alignment (or misalignment) on the ceramic subs has been a topic I’ve seen discussed on forums and YouTube more than a few times. It’s not extremely uncommon to see a slight misaligned bezel insert. Is it a warranty issue? I saw one video where a guy had his fixed by the RSC, but it took multiple tries to get it done right. If you live nearby a RSC and can walk in, give it a shot. If you’re going to be mailing it in, it might takes months and multiple trips to get it right. Sent from my iPad using Tapatalk

4 April 2018, 10:54 PM	#12
siempreko "TRF" Member Join Date: Jan 2013 Location: Maryland, USA Watch: Sometimes Posts: 1,197	If it bothers you, then send it in. They will be happy to fix it!

4 April 2018, 10:58 PM	#14
Benjo74 "TRF" Member Join Date: Aug 2014 Posts: 1,125	I have the same issue on my 2017 Sub LV. It does bother me, but not enough to send it back for repair under warranty. The prospect of 3 months (or whatever) without my watch as well as the risk that they still might get it wrong (as someone said above) puts me off. However, it does bug me that a Rolex would have such a flaw. Especially as my Black Bay aligns perfectly. It seems like something they just should not be getting wrong. Sent from my iPhone using Tapatalk

4 April 2018, 10:59 PM	#15
Flier Banned Join Date: Dec 2017 Location: Cy Watch: ROLEX Posts: 516	This

4 April 2018, 11:09 PM	#17
Flier Banned Join Date: Dec 2017 Location: Cy Watch: ROLEX Posts: 516	Interesting Thanks

4 April 2018, 11:09 PM	#18
Anson880621 "TRF" Member Join Date: May 2016 Real Name: Anson Location: Wakanda Watch: Submariner Posts: 54	My LV has the same issue but I don't think it's really matter

4 April 2018, 11:14 PM	#19
samson66 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: Jul 2013 Real Name: Mike Location: Downy Ocean Hon Watch: my money leaving! Posts: 13,795	Used to drive me crazy on my 16710. It was right in between two clicks and my OCD made me sort of balance it between the two clicks and hope it would stay there for an extended time. Got lucky on both my SD43 and Black Bay - both lined up perfectly (whew!)

4 April 2018, 11:44 PM	#20
Flier Banned Join Date: Dec 2017 Location: Cy Watch: ROLEX Posts: 516	I blame It on OCD for my case also

5 April 2018, 03:19 AM	#23
drm20 2024 SubLV41 Pledge Member Join Date: May 2011 Real Name: Dave Location: Scottsdale, AZ Watch: Just one more Posts: 1,062	I had a similar problem with my last 114060. It drove me nuts so I ended up sending it to RSC Dallas. They adjusted it (under warranty). I know, ocd, can't help it.

5 April 2018, 03:42 AM	#25
diewithme "TRF" Member Join Date: Dec 2014 Location: Slovakia Posts: 90	Sorry friend, same here on my TT sub. Brought back to AD, better now, but still not centered, no matter what i do. (Also 45/markings off). Its heavy shit that QC by Rolex is up not best standard and also service server did their job about 50% max.. I have 5 warranty so maybe i ll try another shot again later..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)