ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

lwrm23 · 16 April 2009, 11:53 AM

Hi, this is only my second post on this forum.. But... Is there a way to micro adjust the bracelet on my new GMT Master II? I have heard that there are only three micro adjustments on it.. How do I make the bracelet just a bit smaller?

Thanks

JJ Irani · 16 April 2009, 11:55 AM

Quote:

Originally Posted by lwrm23

Hi, this is only my second post on this forum.. But... Is there a way to micro adjust the bracelet on my new GMT Master II? I have heard that there are only three micro adjustments on it.. How do I make the bracelet just a bit smaller?

Thanks

Hi and welcome to TRF.

Since the micro-holes don't go all the way through the clasp, the job can be tricky. If it's just a minor adjustment, take it in to your watchmaker and he will adjust it while you wait in a few minutes.

Good luck - JJ

Andad · 16 April 2009, 07:14 PM

Are we talking new GMT IIc with easylink?

lwrm23 · 16 April 2009, 10:16 PM

Yes exactly!

Colnago · 16 April 2009, 10:55 PM

The new GMT Bracelet has three micro setting positions....and of course removable links....the set-up allows you to adjust the bracelet effectively in "one third of a link length" increments....like this....bracelet in it's maximum length config with the spring bar in the micro recess closest to the end of the clasp....next adjustment, simple, move the spring bar to the middle micro recess, you have shortened the bracelet by one third of a link......next adjustment move the spring bar to the micro recess furthest into the clasp, now it's adjusted shorter by two thirds of a link......next adjustment, remove a link, put the spring bar back in the micro recess closest to the end of the clasp, now it is shortened by one full link.....repeat the process to shorten in one third increments, obviously 'till you run out of removable links......the "comfort" link is supposed to give an extra half a link, in my opinion that seems about right.....I found the bracelet very easy to adjust to fit my wrist which is small.....hope I haven't dumbed this down too much, certainly wasn't meant to read like that.....just a step by step "how to"...hope it helps

Mwing · 18 June 2009, 08:25 AM

connect the spring bar closest to clasp lock while comfort link extended

is equal to

connect the sping bar at middle hole while comfort link closed

is that correct?

Dom · 18 June 2009, 09:17 AM

No. There is a minor difference of 1-2mm. Shorter that is for the middle hole option.

Mwing · 18 June 2009, 10:52 AM

ic, thanks, better ask first b4 adjusting, it is so difficult to take it out and put it back without a mini fork.

16 April 2009, 11:53 AM	#1
lwrm23 "TRF" Member Join Date: Jan 2009 Real Name: Craig Location: Florida Watch: SubC Posts: 140	New GMT II Question Hi, this is only my second post on this forum.. But... Is there a way to micro adjust the bracelet on my new GMT Master II? I have heard that there are only three micro adjustments on it.. How do I make the bracelet just a bit smaller? Thanks

16 April 2009, 07:14 PM	#3
Andad 2024 SubLV41 Pledge Member Join Date: Nov 2006 Real Name: Eddie Location: Australia Watch: A few. Posts: 37,534	Are we talking new GMT IIc with easylink? __________________ E

16 April 2009, 10:55 PM	#5
Colnago "TRF" Member Join Date: Apr 2009 Real Name: Bill Hart Location: Richmond, NY, UK Watch: Rlx=3, Tdr=3, Om=3 Posts: 3,053	The new GMT Bracelet has three micro setting positions....and of course removable links....the set-up allows you to adjust the bracelet effectively in "one third of a link length" increments....like this....bracelet in it's maximum length config with the spring bar in the micro recess closest to the end of the clasp....next adjustment, simple, move the spring bar to the middle micro recess, you have shortened the bracelet by one third of a link......next adjustment move the spring bar to the micro recess furthest into the clasp, now it's adjusted shorter by two thirds of a link......next adjustment, remove a link, put the spring bar back in the micro recess closest to the end of the clasp, now it is shortened by one full link.....repeat the process to shorten in one third increments, obviously 'till you run out of removable links......the "comfort" link is supposed to give an extra half a link, in my opinion that seems about right.....I found the bracelet very easy to adjust to fit my wrist which is small.....hope I haven't dumbed this down too much, certainly wasn't meant to read like that.....just a step by step "how to"...hope it helps __________________ Bill "There's only three kinds of people in this world....those that can count....and those that can't" TRF's "JJ's" Bar & NightClub Patron

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

16 April 2009, 10:16 PM	#4
lwrm23 "TRF" Member Join Date: Jan 2009 Real Name: Craig Location: Florida Watch: SubC Posts: 140	Yes exactly!

18 June 2009, 08:25 AM	#6
Mwing "TRF" Member Join Date: Jul 2008 Location: Canada Posts: 216	connect the spring bar closest to clasp lock while comfort link extended is equal to connect the sping bar at middle hole while comfort link closed is that correct?

18 June 2009, 09:17 AM	#7
Dom "TRF" Member Join Date: Mar 2009 Real Name: Dominik Location: Zürich Watch: Rolex, Patek, FPJ Posts: 381	No. There is a minor difference of 1-2mm. Shorter that is for the middle hole option.

18 June 2009, 10:52 AM	#8
Mwing "TRF" Member Join Date: Jul 2008 Location: Canada Posts: 216	ic, thanks, better ask first b4 adjusting, it is so difficult to take it out and put it back without a mini fork.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)