ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

timlo · 2 July 2020, 08:13 PM

Hi all,

I would like to know if it is abnormal for the 12 o clock side lugs to sit slightly higher than the case as the opposite side is not like that.

thanks

RolexZen · 2 July 2020, 08:54 PM

Is the ulna bone under the top end of your watch causing it to happen?

timlo · 2 July 2020, 10:57 PM

It looks the same when it is off my wrist. Some say the upper part of the case was polished massively to cause that. But comparing the bevels and the distance between the lug holes and the case edges I do not think that is the case.

Benzsiam · 2 July 2020, 11:49 PM

If it isn't symmetrical or even on both directions, it might happened from polished massively.

Tomas Eriksson · 3 July 2020, 01:07 AM

Quote:

Originally Posted by Benzsiam

If it isn't symmetrical or even on both directions, it might happened from polished massively.

If you look at the picture you will see it hasn't been polished massively

singe89 · 3 July 2020, 01:50 AM

Doubt the lugs are over polished so just buy the RG bracelet and hopefully problem solved.

You could also try swapping the strap 180* and see if the plots still sit like that on the bottom lugs. Then its a plot thickness issue and not a lug issue.

RolexZen · 3 July 2020, 03:28 AM

Quote:

Originally Posted by singe89

Doubt the lugs are over polished so just buy the RG bracelet and hopefully problem solved.

You could also try swapping the strap 180* and see if the plots still sit like that on the bottom lugs. Then its a plot thickness issue and not a lug issue.

Or wearing the watch upside down (not face down)?

JohnnyM · 3 July 2020, 06:16 AM

Where did you buy the watch? Doesn't sound right to me

timlo · 3 July 2020, 09:21 PM

From this photo I think the two sides look quite equal. Maybe those plots are just thicker?

epic · 3 July 2020, 11:08 PM

Quote:

Originally Posted by timlo

From this photo I think the two sides look quite equal. Maybe those plots are just thicker?

Hi, the plots at the 12'o clock could be inverted, have a service centre look at it and suggest them to check if the plots are inverted.
Should be a very quick fix.

Cheers

timlo · 4 July 2020, 12:30 AM

Thank you for your replies

timlo · 5 July 2020, 02:17 AM

Quote:

Originally Posted by epic

Hi, the plots at the 12'o clock could be inverted, have a service centre look at it and suggest them to check if the plots are inverted.
Should be a very quick fix.

Cheers

I inverted it but they still sit higher than the lugs...

2 July 2020, 08:13 PM	#1
timlo "TRF" Member Join Date: May 2013 Location: Home Posts: 207	AP 15300or lugs question Hi all, I would like to know if it is abnormal for the 12 o clock side lugs to sit slightly higher than the case as the opposite side is not like that. thanks Attached Images

3 July 2020, 09:21 PM	#9
timlo "TRF" Member Join Date: May 2013 Location: Home Posts: 207	From this photo I think the two sides look quite equal. Maybe those plots are just thicker? Attached Images

2 July 2020, 08:54 PM	#2
RolexZen "TRF" Member Join Date: Apr 2016 Location: Atlanta Watch: No Rolex Posts: 722	Is the ulna bone under the top end of your watch causing it to happen?

2 July 2020, 10:57 PM	#3
timlo "TRF" Member Join Date: May 2013 Location: Home Posts: 207	It looks the same when it is off my wrist. Some say the upper part of the case was polished massively to cause that. But comparing the bevels and the distance between the lug holes and the case edges I do not think that is the case.

2 July 2020, 11:49 PM	#4
Benzsiam 2024 Pledge Member Join Date: Mar 2015 Location: USA Watch: Rolex/AP/PP/ALS Posts: 6,001	If it isn't symmetrical or even on both directions, it might happened from polished massively.

3 July 2020, 01:50 AM	#6
singe89 "TRF" Member Join Date: Oct 2011 Real Name: Jim Location: Orange County, CA Watch: Rolex, AP & Patek Posts: 3,747	Doubt the lugs are over polished so just buy the RG bracelet and hopefully problem solved. You could also try swapping the strap 180* and see if the plots still sit like that on the bottom lugs. Then its a plot thickness issue and not a lug issue.

3 July 2020, 06:16 AM	#8
JohnnyM Banned Join Date: Jun 2020 Location: Merica Watch: All the good ones Posts: 173	Where did you buy the watch? Doesn't sound right to me

4 July 2020, 12:30 AM	#11
timlo "TRF" Member Join Date: May 2013 Location: Home Posts: 207	Thank you for your replies

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)