ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
20 September 2020, 12:08 PM | #1 |
"TRF" Member
Join Date: Aug 2017
Location: Canada
Posts: 7
|
Advice needed - Gilt 1500
Hello everyone! This is my first post and I hope it proves to be interesting for you!
Recently I was lucky enough to receive a vintage Rolex from my mother and father in law as a gift. The watch used to belong to my wife's grandfather, who was a military pilot in their home country in Latin America. From what I can tell, based on information I’ve learned here in the forums and the documents that are with the watch, this watch seems to be a late 60’s reference 1500 with a glossy gilt dial. Serial is in the 2.2mil range. From what we can tell, it was bought in 1971 and was worn until about 1985, when it started to become to dangerous to wear a nice watch in their country, and the scratches became too ugly for my wife’s grandfather. Since then it has sat in the original Rolex box, in a drawer. I believe it is unpolished, service history unknown. The watch is currently with my in-laws, and they’ll be bringing it with them when they are able to travel internationally again. In the meantime I am looking for some advice on what I should have done on the watch... Keep in mind that my in-laws (and myself) would like to have it restored to the point that I could wear it daily, but is still “grandpa’s watch” if that makes sense. - My father in law said that the watch began running as soon as he picked it up, but obviously I would be looking to get that serviced. I currently reside in Alberta Canada. Any recommendation for where to get a service? I do not want to send a vintage Rolex to a RSC, as I’d like the watch to remain as original as possible. - Obviously, the crystal looks to be too far gone and I would look to have that replaced with another acrylic crystal. - I see that the tritium lume unfortunately is not a custard colour, but dark green/black. So I assume that there will be some moisture damage. Would it be frowned up to keep the original hands and dial, but have them re-lumed to look “period correct? I think bright-white lume would look bad... what do you all think? I don’t really care if the lume glows or not, but the mouldy tritium is not great looking. -Lastly, I do not want to ask a watchmaker to polish the watch and lose the original shape and lines of the case. But it does look rather rough. Not sure what to do here! Anyhow, here are the photos! They are all I have, and were taken by my father in-law. So they are what they are LOL. Looking forward to hearing everyone’s input on how I should go about fixing this thing up! Cheers |
22 September 2020, 04:13 AM | #2 |
"TRF" Member
Join Date: Apr 2018
Location: Ontario
Posts: 378
|
Movement service and new crystal is all I would do if it were mine. I am not a fan of re-lume.
Lots of watchmakers can handle the work. One of the lads from Western Canada should be along with a recommendation soon enough. Might help to know what city you are in. Nice watch, great family history, best of luck with it. |
22 September 2020, 05:52 AM | #3 |
2024 SubLV41 Pledge Member
Join Date: May 2008
Real Name: Matt
Location: Wine Country, Ca
Posts: 5,998
|
As above, I would only do a movement service, replace the crystal and possibly have the bracelet rebuilt if you plan to wear it often. The bracelet looks pretty stretched. You can get everything done for around $1200 including the bracelet rebuild. I honestly would not have the case polished at all. All those scratches, dings and dents were put there by your grand dads love of the watch.
The dial doesnt look like it originally had lume, only the hands. I would not add it to the dial. You can change the hands, there are a lot available used. You may be able to find a pair on eBay with a nice lume color and then have them swapped out during service.
__________________
TRF Member 11738 |
22 September 2020, 09:03 AM | #4 | |
"TRF" Member
Join Date: Aug 2017
Location: Canada
Posts: 7
|
Quote:
Appreciate all the advice so far! |
|
22 September 2020, 09:07 AM | #5 | |
"TRF" Member
Join Date: Aug 2017
Location: Canada
Posts: 7
|
Quote:
In the case that I pursue a new (to me) set of hands, where would a guy go about looking for those? Hopefully that’s okay to ask... I can edit the comment and remove this question if needed. Never sourced vintage watch parts before so I apologize for my lack of knowledge on that front! Thanks again! |
|
22 September 2020, 09:12 AM | #6 | |
"TRF" Member
Join Date: Sep 2012
Location: Japan
Posts: 4,367
|
Quote:
It's good that you're researching how to spruce it up without ruining its originality and character. Your great-grandfather would be proud. |
|
22 September 2020, 10:04 AM | #7 |
"TRF" Member
Join Date: Nov 2010
Real Name: Adam
Location: Ontario, Canada
Watch: Pepsi.
Posts: 5,749
|
What a great story, cheers from Ontario!
Can't wait to see it with a new crystal, serviced and on your wrist
__________________
- Adam Instagram: @GMTSUBTIME |
22 September 2020, 11:22 AM | #8 |
"TRF" Member
Join Date: Apr 2018
Location: Ontario
Posts: 378
|
I posted on Canadian Watch Collector, asking for watchmaker recommendations in Edmonton and Calgary. We'll see what turns up.
Greetings from Ottawa! |
22 September 2020, 12:31 PM | #9 |
"TRF" Member
Join Date: Aug 2017
Location: Canada
Posts: 7
|
|
22 September 2020, 01:19 PM | #10 |
"TRF" Member
Join Date: Aug 2014
Location: Alberta Canada
Posts: 24
|
Nice Watch! I had Andre at Swiss Watch Clinic in Cow-town (aka Calgary) service my late fathers 16014 - I was happy with his work, he should be able to help you. Avoid Alberta Time Services (also in Calgary) I had them service an Omega 1120 and it needed servicing months later. Finally, I've never used them but have hear good things about City Time Watch & Clock Repair (Calgary).
I agree with what others have posted: new crystal, service movement, possible bracelet restoration, otherwise leave it be. |
22 September 2020, 01:29 PM | #11 |
2024 SubLV41 Pledge Member
Join Date: Jul 2012
Real Name: Kat
Location: CA, USA
Watch: 126233 Wimbledon T
Posts: 7,165
|
What a great gift from your in-laws. Hope to see pics after it has been restored. Welcome to the forum.
Kat |
23 September 2020, 10:26 AM | #12 |
"TRF" Member
Join Date: Apr 2018
Location: Ontario
Posts: 378
|
Hi, MiddleBrother.
The lads on CWC offered three options, all with positives. Sandor Izsak in Edmonton, Bryn at JV Anderson in Calgary, and Otto Friedl in Vancouver. Sandor Izsak had several guys weigh in with positive experiences. |
23 September 2020, 10:56 AM | #13 | |
"TRF" Member
Join Date: Aug 2017
Location: Canada
Posts: 7
|
Quote:
Looks like I’ve got some options to check out once the watch gets here |
|
23 September 2020, 10:58 AM | #14 | |
"TRF" Member
Join Date: Aug 2017
Location: Canada
Posts: 7
|
Quote:
Cheers |
|
23 September 2020, 11:18 AM | #15 |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,296
|
Yes, I would also suggest living with the current dial and hands for a while before jumping into a re-lume, which is irreversible. Most likely, you will come to appreciate its originality as time passes. But if not, you can always choose to have the dial and hands re-lumed at a later date.
__________________
@oldwatchdan on IG |
24 September 2020, 08:52 AM | #16 | |
"TRF" Member
Join Date: Aug 2017
Location: Canada
Posts: 7
|
Quote:
Cheers |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.