ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

jenu · 27 July 2009, 06:57 AM

I have a water softner system in my home. Is there enough salt in this water to discolor or pit the steel?

macstiltskin · 27 July 2009, 06:59 AM

Mr Sandman · 27 July 2009, 07:02 AM

WTF

snow_rocks · 27 July 2009, 07:19 AM

The salt in the softener will play havoc on your Seamaster!

snow_rocks · 27 July 2009, 07:20 AM

Sorry about that. No it won't.

36475koz · 27 July 2009, 07:29 AM

Wow.

SeamasterGMT · 27 July 2009, 07:44 AM

Yes, it quite possibly will.

Move house immediately.

Also, move more inland as the wind will carry salt in the air from the sea which will also corrode your watch.

DRAWTOOL · 27 July 2009, 08:01 AM

Does this mean I gotta give back the cigar JJ gave me?

sea-dweller · 27 July 2009, 08:09 AM

If you have any doubt, rinse it with clean water after exposure.

Idle Swede · 27 July 2009, 08:14 AM

A couple of years ago while diving down in Key West I found a 150 Kg 18K yellow gold bar.

Unfortunately it had been laying on the ocean floor for 200 years so when I surfaced it only weighed 1 gram....

rkb · 27 July 2009, 08:18 AM

The salt in the water softener is, to the best of my recollection, an ionic exchange and while the specific gravity my be slightly increased I highly doubt that the enough actual NaCl make it into the water to effect SS. However if your watch rusts off you arm and drops into the dirt, I was wrong.

Andad · 27 July 2009, 08:58 AM

I have a water softner system in my home. Is there enough salt in this water to discolor or pit the steel?

No mate, she'll be right.

Tools · 27 July 2009, 10:34 AM

Your Rolex will dry spot-free............

cody p · 27 July 2009, 10:55 AM

Quote:

Originally Posted by macstiltskin

you'll see it so much that eventually you'll grow immune to it.

Harvey58 · 27 July 2009, 11:31 AM

Made to swim in pools and oceans....So I guess salt water does not hurt the watch!!!

33JS · 27 July 2009, 10:19 PM

Quote:

Originally Posted by sea-dweller

If you have any doubt, rinse it with clean water after exposure.

You may all be surprised! SS will corrode very badly in sea water given the right conditions. I've seen many SS underwater components corrode away to nothing within a few days (I'm a Subsea Engineer) - but as I said, the conditions have to be right.....and it was only with 316 SS, not the 904 of the DSSD.

SO, always best to rinse a Stainless watch in fresh water after diving in salt water.

Brushpup · 27 July 2009, 11:47 PM

Huuuuuuuuuuuuuuuughhhhhhhhhhhhh.

wuzzzer · 28 July 2009, 03:59 AM

Clay · 28 July 2009, 04:03 AM

Lolololololol

macstiltskin · 28 July 2009, 06:25 AM

Quote:

Originally Posted by 33JS

You may all be surprised! SS will corrode very badly in sea water given the right conditions. I've seen many SS underwater components corrode away to nothing within a few days (I'm a Subsea Engineer) - but as I said, the conditions have to be right.....and it was only with 316 SS, not the 904 of the DSSD.

SO, always best to rinse a Stainless watch in fresh water after diving in salt water.

So he'll be safe doing the washing up then?

DadsWatch72 · 28 July 2009, 06:49 AM

904L Corrosion Resistance

Although originally developed for its resistance to sulphuric acid it also has a very high resistance to a wide range of environments. A PRE of 35 indicates that the material has good resistance to warm sea water and other high chloride environments. High nickel content results in a much better resistance to stress corrosion cracking than the standard austenitic grades. Copper adds resistance to sulphuric and other reducing acids, particularly in the very aggressive "mid concentration" range.

In most environments 904L has a corrosion performance intermediate between the standard austenitic grade 316L and the very highly alloyed 6% molybdenum and similar "super austenitic" grades.

In aggressive nitric acid 904L has less resistance than molybdenum-free grades such as 304L and 310L.

For maximum stress corrosion cracking resistance in critical environments the steel should be solution treated after cold work.

sexner · 28 July 2009, 08:04 AM

Quote:

Originally Posted by cody p

you'll see it so much that eventually you'll grow immune to it.

How long does it take??

alcook · 28 July 2009, 08:07 AM

Quote:

Originally Posted by DadsWatch72

904L Corrosion Resistance

Although originally developed for its resistance to sulphuric acid it also has a very high resistance to a wide range of environments.

Next time I take a dip in a Sulphuric Acid bath, I know my watch will be safe... Phew!

sexner · 28 July 2009, 08:42 AM

Quote:

Originally Posted by 33JS

You may all be surprised! SS will corrode very badly in sea water given the right conditions. I've seen many SS underwater components corrode away to nothing within a few days (I'm a Subsea Engineer) - but as I said, the conditions have to be right.....and it was only with 316 SS, not the 904 of the DSSD.

SO, always best to rinse a Stainless watch in fresh water after diving in salt water.

Then either take the engine and other related goodies producing magnetic fields in the salt water out of your Rolex or strap a big zinc diode to your a**e.

Welshwatchman · 28 July 2009, 08:59 AM

Thanks for the thread.

Mike B · 28 July 2009, 09:13 AM

Oh boy, here we go again . . . . .

Watch Fan · 28 July 2009, 10:11 AM

The short answer is.......no it won't hurt your watch.

swsc · 28 July 2009, 10:27 AM

No, It`ll be fine

Mrdi · 28 July 2009, 10:45 AM

OK for the watch...
Just don't drink it.

DaytonaOnM5 · 28 July 2009, 11:26 AM

Mac Genius from an Apple store?

27 July 2009, 06:57 AM	#1
jenu Member Join Date: Jun 2009 Real Name: Patel Location: columbus, Ohio Watch: iPhone Posts: 20	Salt water effect I have a water softner system in my home. Is there enough salt in this water to discolor or pit the steel?

27 July 2009, 08:09 AM	#9
sea-dweller "TRF" Member Join Date: Oct 2007 Real Name: Dennis Location: Bay Area - 925 Posts: 40,018	If you have any doubt, rinse it with clean water after exposure. __________________ TRF Member #6699 (since September 2007)

27 July 2009, 08:18 AM	#11
rkb "TRF" Member Join Date: Mar 2009 Real Name: Russell Location: Seattle Metro Watch: EXPORER II Posts: 605	The salt in the water softener is, to the best of my recollection, an ionic exchange and while the specific gravity my be slightly increased I highly doubt that the enough actual NaCl make it into the water to effect SS. However if your watch rusts off you arm and drops into the dirt, I was wrong. __________________

27 July 2009, 08:58 AM	#12
Andad 2024 SubLV41 Pledge Member Join Date: Nov 2006 Real Name: Eddie Location: Australia Watch: A few. Posts: 37,534	I have a water softner system in my home. Is there enough salt in this water to discolor or pit the steel? No mate, she'll be right. __________________ E

27 July 2009, 10:34 AM	#13
Tools TRF Moderator & 2024 SubLV41 Patron Join Date: May 2007 Real Name: Larry Location: Mojave Desert Watch: GMT's Posts: 43,515	Your Rolex will dry spot-free............ __________________ (Chill ... It's just a watch Forum.....) NAWCC Member

27 July 2009, 06:59 AM	#2
macstiltskin Member Join Date: May 2009 Location: France Posts: 357

27 July 2009, 07:02 AM	#3
Mr Sandman "TRF" Member Join Date: Apr 2008 Real Name: Jim Location: Devon U.K Posts: 527	WTF

27 July 2009, 07:19 AM	#4
snow_rocks Banned Join Date: Feb 2009 Real Name: Rick Location: At what TIME?!!! Watch: the SKY tonite! Posts: 3,225	The salt in the softener will play havoc on your Seamaster!

27 July 2009, 07:20 AM	#5
snow_rocks Banned Join Date: Feb 2009 Real Name: Rick Location: At what TIME?!!! Watch: the SKY tonite! Posts: 3,225	Sorry about that. No it won't.

27 July 2009, 07:29 AM	#6
36475koz "TRF" Member Join Date: Jul 2009 Real Name: Bill Location: Chicago, USA Posts: 193	Wow.

27 July 2009, 07:44 AM	#7
SeamasterGMT Banned Join Date: Mar 2009 Location: USA Watch: DeepSea Posts: 822	Yes, it quite possibly will. Move house immediately. Also, move more inland as the wind will carry salt in the air from the sea which will also corrode your watch.

27 July 2009, 08:01 AM	#8
DRAWTOOL "TRF" Member Join Date: Apr 2009 Real Name: Mikey Uí Néill Location: Olden Texas Watch: 14060M & 16570 Posts: 1,941	Does this mean I gotta give back the cigar JJ gave me?

27 July 2009, 08:14 AM	#10
Idle Swede Suspended Join Date: Oct 2008 Real Name: Leo Location: Boca Raton Posts: 13,820	A couple of years ago while diving down in Key West I found a 150 Kg 18K yellow gold bar. Unfortunately it had been laying on the ocean floor for 200 years so when I surfaced it only weighed 1 gram....

27 July 2009, 11:31 AM	#15
Harvey58 "TRF" Member Join Date: Jul 2009 Real Name: Harvey Location: Clermont, Florida Watch: TT Sub Champ Serti Posts: 338	Made to swim in pools and oceans....So I guess salt water does not hurt the watch!!! __________________ TT Sub Champ. Serti Dial "M" SS Sub-C "G"

27 July 2009, 11:47 PM	#17
Brushpup "TRF" Member Join Date: Jun 2007 Real Name: Patrick Location: Texas Watch: what I'm wearing Posts: 5,943	Huuuuuuuuuuuuuuuughhhhhhhhhhhhh. __________________ *TRFs "AFTER DARK" Bar & NightClub Patron-Founding Member* PClub # 10 74,592 The safest place for your watch is on your wrist.

28 July 2009, 03:59 AM	#18
wuzzzer "TRF" Member Join Date: Apr 2008 Location: USA Posts: 384

28 July 2009, 04:03 AM	#19
Clay Banned Join Date: Jul 2009 Location: Up a tree Posts: 4,001	Lolololololol

28 July 2009, 06:49 AM	#21
DadsWatch72 Banned Join Date: Jul 2009 Location: USA Watch: DRSD 1665 #3551XXX Posts: 2,401	904L Corrosion Resistance Although originally developed for its resistance to sulphuric acid it also has a very high resistance to a wide range of environments. A PRE of 35 indicates that the material has good resistance to warm sea water and other high chloride environments. High nickel content results in a much better resistance to stress corrosion cracking than the standard austenitic grades. Copper adds resistance to sulphuric and other reducing acids, particularly in the very aggressive "mid concentration" range. In most environments 904L has a corrosion performance intermediate between the standard austenitic grade 316L and the very highly alloyed 6% molybdenum and similar "super austenitic" grades. In aggressive nitric acid 904L has less resistance than molybdenum-free grades such as 304L and 310L. For maximum stress corrosion cracking resistance in critical environments the steel should be solution treated after cold work.

28 July 2009, 08:59 AM	#25
Welshwatchman "TRF" Member Join Date: Apr 2006 Real Name: Paul Location: Wales, UK Posts: 14,578	Thanks for the thread. __________________ ..33

28 July 2009, 09:13 AM	#26
Mike B "TRF" Member Join Date: Jun 2008 Real Name: Mike Location: Gilbert, AZ Watch: DSSD, Omega SMP Posts: 3,055	Oh boy, here we go again . . . . .

28 July 2009, 10:11 AM	#27
Watch Fan "TRF" Member Join Date: Apr 2008 Location: California Watch: Sea Dweller Posts: 676	The short answer is.......no it won't hurt your watch.

28 July 2009, 10:27 AM	#28
swsc "TRF" Member Join Date: Jun 2009 Location: FLORIDA Posts: 83	No, It`ll be fine

28 July 2009, 10:45 AM	#29
Mrdi Banned Join Date: Mar 2006 Location: PA Posts: 3,478	OK for the watch... Just don't drink it.

28 July 2009, 11:26 AM	#30
DaytonaOnM5 "TRF" Member Join Date: Dec 2008 Location: MIA Posts: 3	Mac Genius from an Apple store?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)