ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

cparks555 · 23 March 2011, 05:48 AM

I purchased a 16610LV last week from an AD in town, and love the watch. Only problem is I have small wrists, and it just doesn't fit right. While wearing the watch the clasp seems to center itself on my wrist, which pushes the face way off the outside of my wrist. I hate to say it, but it's uncomfortable almost. I've read where some of you guys have removed a permanent link on the 6 o'clock side, and this seemed to fix the problem. I have to admit, the idea of poping a link off really scares me! Is it worth the risk?

Thanks
Cole

sleddog · 23 March 2011, 05:54 AM

If it's the only way to ensure a comfortable fit, then it's worth it IMO..
It is not reversible however, so when it's done you can't go back!
Maybe speak to your AD first before going this route..They may have a better suggestion or configuration to help...

imono · 23 March 2011, 05:55 AM

Usually the link at the 12 o'clock side has one link more than the 6 side.
I'd take it back to the AD to have them do it for you.
It's better to have a super precision tool to do it personally - not the mini $1.00 combination screwdriver set you buy at the Dollar Store.

Pljson · 23 March 2011, 06:10 AM

Take a look at this thread:

http://www.rolexforums.com/showthrea...ghlight=Pljson

It may answer your question besides providing a good laugh.

BTW, that thread dealt with the 116610LN.

Hope it helps.

cyglee · 23 March 2011, 06:12 AM

Welcome Cole. I have removed a permanent link on my SD, and Gmt ll, both on the 6 side. It is not reversible, but should you need to expand the bracelet, you can purchase another removable link. Check out www.minus4plus6.com-bracelet.htm for fitting ideas. I know what you mean about being hesitant to put vise-grips on the link to be removed, but it makes the fit just right, and centers the watch head for me.

cparks555 · 23 March 2011, 07:36 AM

Thanks everyone! I'm going to have it removed tomorrow, I really think this is the only way to get a good fit(I HOPE).

Tools · 23 March 2011, 07:38 AM

Quote:

Originally Posted by cparks555

Thanks everyone! I'm going to have it removed tomorrow, I really think this is the only way to get a good fit(I HOPE).

- It's a very common way to fit the old bracelets..

All of the new bracelets are coming with additional removable links...

Johny · 23 March 2011, 07:45 AM

hi cole it should not be a risk. make sure that it is the solution before you do it. as rob says explore every avenue. best of luck and i hope that it does the trick for you. j

capote · 23 March 2011, 09:08 AM

How come it is irreversible? I have removed a link at an AD, I heard nothing about that.

cyglee · 23 March 2011, 09:45 AM

Quote:

Originally Posted by capote

How come it is irreversible? I have removed a link at an AD, I heard nothing about that.

I went the diy route, with a pair of vise-grip pliers. The permanent link is thus gouged due to the plier marks. I understand some ADs have a special tool to remove a permanent link; I do not know if the link is marked or not, but it would need a strong press to reattach the link parts. If need be, I would just buy an additional removable link. Please note that the removable links are slightly narrower than the permanent links, but the taper transition is hardly noticeable. I do not intend to flip my SD or GMT ll, and I do want the best fit.

cparks555 · 23 March 2011, 09:46 AM

Alright, I just read about ten pages of posts concerning the removal of a permanent link and feel much better now. Wish me luck!

hdrazor251 · 23 March 2011, 12:49 PM

Quote:

Originally Posted by cparks555

Alright, I just read about ten pages of posts concerning the removal of a permanent link and feel much better now. Wish me luck!

Good luck and let us know how it goes. Contemplated this myself.

Speed · 23 March 2011, 02:10 PM

Here is my "link-ectomy" Performed by the Rolex Surgeon at my local RSC. The clasp is now perfectly centered on the underside of my wrist. Hard to notice the slight gap in tapering on the 6 o'clock side.

Titan1979 · 24 March 2011, 01:41 AM

I got a permanent link removed at RSC Toronto. They did it for free and my explorer now fits perfectly. No worries....get it done!

cyglee · 24 March 2011, 02:05 AM

Quote:

Originally Posted by Titan1979

I got a permanent link removed at RSC Toronto. They did it for free and my explorer now fits perfectly. No worries....get it done!

You can't beat free!! Did they give you the parts back? And if so, are the parts reusable?

cparks555 · 24 March 2011, 05:14 AM

Just picked up my watch from the AD, he removed a permanent link for me and it now fits PERFECT. I was a little worried when I dropped it off, but he said he does it all the time. Couldn't be happier, it finally feels like mine! Thanks for all the help guys.

Cole

Johny · 24 March 2011, 05:39 AM

Quote:

Originally Posted by cparks555

Just picked up my watch from the AD, he removed a permanent link for me and it now fits PERFECT. I was a little worried when I dropped it off, but he said he does it all the time. Couldn't be happier, it finally feels like mine! Thanks for all the help guys.

Cole

good stuff cole. glad that you got it sorted.

Cabaiguan · 24 March 2011, 07:30 AM

Awesome. I have a Tudor that I'm selling mostly because of this issue. I wonder if the RSC would perform this operation on a Tudor jubilee? May need to inquire...

dannyt · 24 March 2011, 08:28 AM

Have you tried using half links? I have found they help me out considerably, but I'm not so sure all subs have them.

globalmedia33 · 28 March 2011, 01:18 AM

Could anyone explain to me how to remove the 1/2 link from the 12 o'clock and put it to the 6 o'clock side?

khmyjy · 2 September 2011, 08:05 AM

Quote:

Originally Posted by Titan1979

I got a permanent link removed at RSC Toronto. They did it for free and my explorer now fits perfectly. No worries....get it done!

Hi there, I think I am going to have mine remove too, how long you have to leave you watch at the RSC or they do it while you wait? Thanks

skyedog · 2 September 2011, 08:36 AM

love it! small wrist here too! I have 2 watches both remove one p link.

Cabaiguan · 2 September 2011, 11:15 AM

I finally sold the Tudor because I didn't want to do this operation. After purchasing an SD and having the same problem, I bit the bullet and did it myself. Used two vise grips and it took 5 minutes. The fit is PERFECT.

khmyjy · 3 September 2011, 11:49 AM

I took my 16610 Sub to the RSC today and they removed the permanent link in 15 minutes. Now the watch fit me properly and I am a happy camper! Highly recommand for anyone who have small wrist.

23 March 2011, 05:48 AM	#1
cparks555 "TRF" Member Join Date: Feb 2011 Location: SC Posts: 274	Removing A Permanent Link? I purchased a 16610LV last week from an AD in town, and love the watch. Only problem is I have small wrists, and it just doesn't fit right. While wearing the watch the clasp seems to center itself on my wrist, which pushes the face way off the outside of my wrist. I hate to say it, but it's uncomfortable almost. I've read where some of you guys have removed a permanent link on the 6 o'clock side, and this seemed to fix the problem. I have to admit, the idea of poping a link off really scares me! Is it worth the risk? Thanks Cole

23 March 2011, 05:54 AM	#2
sleddog TRF Moderator & 2024 SubLV41 Patron Join Date: Jul 2007 Real Name: Rob Location: Nearby. Posts: 24,931	If it's the only way to ensure a comfortable fit, then it's worth it IMO.. It is not reversible however, so when it's done you can't go back! Maybe speak to your AD first before going this route..They may have a better suggestion or configuration to help... __________________ He who wears a Rolex is always on time, even when late!! TRF's "After Dark" Bar & Nightclub Patron-Founding Member..

23 March 2011, 06:10 AM	#4
Pljson "TRF" Member Join Date: Jun 2009 Location: NYC Watch: 116610LN Posts: 14	Take a look at this thread: http://www.rolexforums.com/showthrea...ghlight=Pljson It may answer your question besides providing a good laugh. BTW, that thread dealt with the 116610LN. Hope it helps. Last edited by Pljson; 23 March 2011 at 06:11 AM.. Reason: spelling

23 March 2011, 07:45 AM	#8
Johny "TRF" Member Join Date: Mar 2010 Real Name: john Location: Scotland Watch: sub 16610Lv Posts: 13,523	hi cole it should not be a risk. make sure that it is the solution before you do it. as rob says explore every avenue. best of luck and i hope that it does the trick for you. j __________________ "AFTER DARK" BAR AND NIGHT CLUB GM.

28 March 2011, 01:18 AM	#20
globalmedia33 "TRF" Member Join Date: Mar 2009 Real Name: Thien Location: Frisco,TX/Saigon Watch: All Rolex Posts: 2,754	Could anyone explain to me how to remove the 1/2 link from the 12 o'clock and put it to the 6 o'clock side? __________________ Sub. 5513 116710LN 116610LV “I THINK PERFECTION IS UGLY. SOMEWHERE IN THE THINGS HUMANS MAKE, I WANT TO SEE SCARS, FAILURE, DISORDER AND DISTORTION" - YOHJI YAMAMOTO

23 March 2011, 05:55 AM	#3
imono "TRF" Member Join Date: Jan 2010 Location: USA Posts: 3,241	Usually the link at the 12 o'clock side has one link more than the 6 side. I'd take it back to the AD to have them do it for you. It's better to have a super precision tool to do it personally - not the mini $1.00 combination screwdriver set you buy at the Dollar Store.

23 March 2011, 06:12 AM	#5
cyglee "TRF" Member Join Date: Aug 2010 Real Name: Gordon Location: California Watch: Gmtll,LV,SD,GV,etc Posts: 627	Welcome Cole. I have removed a permanent link on my SD, and Gmt ll, both on the 6 side. It is not reversible, but should you need to expand the bracelet, you can purchase another removable link. Check out www.minus4plus6.com-bracelet.htm for fitting ideas. I know what you mean about being hesitant to put vise-grips on the link to be removed, but it makes the fit just right, and centers the watch head for me.

23 March 2011, 07:36 AM	#6
cparks555 "TRF" Member Join Date: Feb 2011 Location: SC Posts: 274	Thanks everyone! I'm going to have it removed tomorrow, I really think this is the only way to get a good fit(I HOPE).

23 March 2011, 09:08 AM	#9
capote "TRF" Member Join Date: Oct 2010 Real Name: Daniel Location: Sweden Watch: 16570 Posts: 7,315	How come it is irreversible? I have removed a link at an AD, I heard nothing about that.

23 March 2011, 09:46 AM	#11
cparks555 "TRF" Member Join Date: Feb 2011 Location: SC Posts: 274	Alright, I just read about ten pages of posts concerning the removal of a permanent link and feel much better now. Wish me luck!

23 March 2011, 02:10 PM	#13
Speed "TRF" Member Join Date: Aug 2009 Location: USA Posts: 19,706	Here is my "link-ectomy" Performed by the Rolex Surgeon at my local RSC. The clasp is now perfectly centered on the underside of my wrist. Hard to notice the slight gap in tapering on the 6 o'clock side.

24 March 2011, 01:41 AM	#14
Titan1979 "TRF" Member Join Date: Dec 2009 Location: canada Posts: 89	I got a permanent link removed at RSC Toronto. They did it for free and my explorer now fits perfectly. No worries....get it done!

24 March 2011, 05:14 AM	#16
cparks555 "TRF" Member Join Date: Feb 2011 Location: SC Posts: 274	Just picked up my watch from the AD, he removed a permanent link for me and it now fits PERFECT. I was a little worried when I dropped it off, but he said he does it all the time. Couldn't be happier, it finally feels like mine! Thanks for all the help guys. Cole

24 March 2011, 07:30 AM	#18
Cabaiguan "TRF" Member Join Date: Mar 2010 Real Name: Raf Location: NJ Watch: GMTII Posts: 2,155	Awesome. I have a Tudor that I'm selling mostly because of this issue. I wonder if the RSC would perform this operation on a Tudor jubilee? May need to inquire...

24 March 2011, 08:28 AM	#19
dannyt "TRF" Member Join Date: Aug 2010 Real Name: Daniel Location: Ontario, CA Watch: 116610LN Posts: 229	Have you tried using half links? I have found they help me out considerably, but I'm not so sure all subs have them.

2 September 2011, 08:36 AM	#22
skyedog "TRF" Member Join Date: Dec 2010 Real Name: Joey Location: around the Bay Watch: ing TRF Posts: 1,942	love it! small wrist here too! I have 2 watches both remove one p link.

2 September 2011, 11:15 AM	#23
Cabaiguan "TRF" Member Join Date: Mar 2010 Real Name: Raf Location: NJ Watch: GMTII Posts: 2,155	I finally sold the Tudor because I didn't want to do this operation. After purchasing an SD and having the same problem, I bit the bullet and did it myself. Used two vise grips and it took 5 minutes. The fit is PERFECT. __________________ "A ship of war is the best ambassador." - Oliver Cromwell

3 September 2011, 11:49 AM	#24
khmyjy "TRF" Member Join Date: Oct 2010 Location: Great White North Watch: Sub C, 14060 Posts: 140	Gor it done today I took my 16610 Sub to the RSC today and they removed the permanent link in 15 minutes. Now the watch fit me properly and I am a happy camper! Highly recommand for anyone who have small wrist.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)