ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
17 April 2015, 11:42 AM | #1 |
"TRF" Member
Join Date: Dec 2013
Location: Ha noi
Posts: 29
|
The first sratch. Very light but hurt so bad :(
My baby was in a bad mood and crying the whole night. This morning i was like walking in the moon and a walk through the door. Very light contact between the door handle and the watch. My heart skipped a beat. Now it has a very light scratch on the bezel.
The scratch is on 3.30 oclock. I know some of you will kindly smooth me with "adding character to the watch" thing, but im kinda perfectionist freak. I can not surpass this and keep my eye off it. Now come a question: Im willing to pay few hundred usd for this to disappear. I know this scratch can be esialy remove by a good watchmaker since its very light. Can i make an appointment with AP service centrel in Singapore, bring it in and collect after a day with only that part polishing? Should i bring it to independent watchmaker that skillful enough to do so? In that case, he must located in Singapore as well since i dont have change to go anywhere else in short period. Will it void my warranty? The watch is only 4 months old. Thanks you guys. |
17 April 2015, 11:47 AM | #2 |
"TRF" Member
Join Date: Jun 2013
Location: Mars
Watch: 5712
Posts: 11,509
|
Man you're gonna have it removed and will have a new one shortly afterwards, I also have 3-4 hairlines on my 5712 bezel, so sure I prefer it without scratches but they are only visible when light hits the bezel at a certain angle, so apart if you get a watch with ceramic bezel you will have scratches, I think it's a bad idea to get this small scratch removed, there will be plenty more at the 1st service after 5 years so I would let them take care of it then, if you really can't take it maybe it's better to flip and get one with ceramic bezel? The RO and Nautilus have that same flat brushed bezel which looks great but is not great for scratches, it's inherent to these models, if I couldn't take the scratches I would get other watches as my 2 are both Nautilus...
|
17 April 2015, 11:50 AM | #3 |
"TRF" Member
Join Date: Dec 2010
Real Name: Mike G
Location: Ohio
Watch: Rolex-Patek-AP
Posts: 3,076
|
Is the scratch at 3:30 or 3:17? Either way you will hate my response but AP bezels are scratch magnets and there will be more to come. I wouldnt let ANYONE touch that other than an AP service center. My suggestion is to wait a few years and when due for service have them lightly clean up the bezel. I hate scratches too but it comes with actually wearing a watch vs keeping a damn safe queen.
|
17 April 2015, 11:53 AM | #4 |
2024 SubLV41 Pledge Member
Join Date: Nov 2012
Location: Bangkok
Posts: 6,124
|
What will you do WHEN you get the next one or the one after that? You can't keep getting it polished out as that removes metal everytime, which in this instance is gold. IMO the first one feels the worst but also looks the worst as it's so out of place as the only one. Once you get some more it will even out a little bit and be less noticeable. It's your watch so by all means fo as you wish, I would just say think about future scratches and what you will do then.
__________________
Nil Satis Nisi Optimum |
17 April 2015, 12:12 PM | #5 |
"TRF" Member
Join Date: Dec 2013
Location: Ha noi
Posts: 29
|
Its an hour past by. I've calmed myself a bit :D
Actually i do acknowledge that Rose gold royal oak is scratch magnet but can not resist it beauty and pull a trigger. I always extra careful when wearing this watch but this sleepness night caught me off guard. I did some research, i heard that after a year or two i can send the wstch in for additional 3 year warranty. Will they remove the scratch by then? Actually i could possibly going to Gemarny this july. Will there any easygoing solution for scratch remover can be done there in Europe? Best regards. Cuong. |
17 April 2015, 12:22 PM | #6 |
"TRF" Member
Join Date: Apr 2012
Real Name: J
Location: El Lay
Watch: AP. Rolex. The end
Posts: 636
|
oh man, this is a subject I am all too familiar with.
Listen, at the end of the day you're going to get another scratch. So my suggestion is this: wait for 2 or 3 years. See how many scratches you accumulate by then. Chances are, you will be used to the scratches. But guess what? if you're not, it's time for a service to the watch and you can get the scratches removed then. but polishing a watch each time you get a scratch is dumb as hell and not a good way to keep the metal on your watch. you WILL get over it. Trust me. And I nitpick over sh*t like you won't believe. the first cut is always the deepest. but never forget, no one else will notice that scratch but you. |
17 April 2015, 12:51 PM | #7 | |
"TRF" Member
Join Date: Jun 2013
Location: Mars
Watch: 5712
Posts: 11,509
|
Quote:
|
|
17 April 2015, 01:02 PM | #8 |
"TRF" Member
Join Date: Apr 2012
Real Name: Alex
Location: Chicago
Watch: AP,PP, Rolex
Posts: 37,156
|
I would leave it, you will get more and just have it polished out at service
__________________
Instagram: @Hairdude Watches in Collection 5070R, 5522A, 214270 MK1, 228238 16750, 26401, 5711, 116718, 116710LN, 116300, 16710"Coke", 372, 15300, 15703 (All Flipped) Official Member "Perpetual 30" Las Vegas GTG 2016 Official Member "WIS-CON" Las Vegas International GTG 2017 Official Member 'WIS-CON' Las Vegas Int'l GTG 2018 |
17 April 2015, 01:43 PM | #9 | |
"TRF" Member
Join Date: Dec 2013
Location: Ha noi
Posts: 29
|
Quote:
Maybe i should start looking for another watch with ceramic bezel now. Anyway does ceramic bezel scratch free? Any recommend model? I prefer this kind of 26320 chrono proportions. Thanks. |
|
17 April 2015, 02:19 PM | #10 |
"TRF" Member
Join Date: Jun 2013
Location: Mars
Watch: 5712
Posts: 11,509
|
Ceramic bezel is 99% scratch free, very hard to scratch or chip, almost impossible as far as I know, if you really can't stand scratches then definitely get a ceramic bezel watch
|
17 April 2015, 03:56 PM | #11 |
"TRF" Member
Join Date: Sep 2008
Location: Sweden
Watch: Rolex, AP & PAM...
Posts: 1,403
|
If that scratch bothers you you have bought the wrong watch IMHO, the vertical brushing of the Bezel make scratches (especially the ones going horisontally) really show, the downside of this type of watch for sure, but you cannot avaid them unfotunatly...
Live with them or buy another watch, because you cannot polish the bezel every time you get a scratch...
__________________
Rolex - SubC... AP - Diver... Panerai - PAM380 Omega - Speedy PRO |
17 April 2015, 04:27 PM | #12 |
2024 SubLV41 Pledge Member
Join Date: Jul 2009
Location: Cave
Watch: Sundial
Posts: 33,940
|
To polish the bezel properly, the case has to be disassembled. You can't just refinish the scratched area. It looks bad if you do.
|
17 April 2015, 07:49 PM | #13 |
"TRF" Member
Join Date: Dec 2005
Posts: 3,670
|
I suggest to leave it as sooner or later you will pick up few more scratches and it is unavoidable not to scratch the bezel if you wear it. Enjoy the watch.
|
17 April 2015, 08:17 PM | #14 |
"TRF" Member
Join Date: Mar 2012
Location: KY
Watch: A few.....
Posts: 3,796
|
I call it character
|
17 April 2015, 09:05 PM | #15 |
"TRF" Member
Join Date: Jan 2011
Location: ny
Watch: yacht master
Posts: 948
|
First one cuts the most. Enjoy your watch there will be more. You will eventually ignore it
|
17 April 2015, 09:22 PM | #16 |
"TRF" Member
Join Date: Dec 2013
Location: Ha noi
Posts: 29
|
Im seriously consider a ceramic watch now. Can you guy recommend me a watch that i can wear with 100% confident and carelessly that i might ruin its perfection? Any particular AP model? Im thinking about rolex daytona chocolate ceramic too. Any suggestions? Thanks.
|
17 April 2015, 09:37 PM | #17 |
"TRF" Member
Join Date: Dec 2013
Location: Ha noi
Posts: 29
|
Im seriously consider a ceramic watch now. Can you guy recommend me a watch that i can wear with 100% confident and carelessly that i might ruin its perfection? Any particular AP model? Im thinking about rolex daytona chocolate ceramic too. Any suggestions? Thanks.
|
17 April 2015, 10:13 PM | #18 |
"TRF" Member
Join Date: May 2013
Real Name: Sam
Location: Arkansas
Posts: 1,042
|
Yep, that hurts. Sorry to see it happen but it will happen again and again as long as you wear it. If I were you, I would leave it alone and just enjoy that beautiful watch as-is.
Sam |
17 April 2015, 11:07 PM | #19 | |
2024 SubLV41 Pledge Member
Join Date: Jul 2009
Location: Cave
Watch: Sundial
Posts: 33,940
|
Quote:
|
|
17 April 2015, 11:36 PM | #20 |
"TRF" Member
Join Date: Jul 2011
Real Name: Serg
Location: US of A
Watch: AP
Posts: 7,437
|
Well ... The right knock might chip it and you will be in a world of pain as it can't be fixed.
__________________
How can you have any pudding if you don't eat yer meat???? |
18 April 2015, 09:11 PM | #21 |
"TRF" Member
Join Date: Dec 2013
Location: Ha noi
Posts: 29
|
Well, i've done some reading today. Look like every RO bezel can only take up to 3-4 times polishing. Just curious, do any of you know how much does it cost for a replacement of rose gold bezel? Thanks.
|
18 April 2015, 11:42 PM | #22 |
2024 SubLV41 Pledge Member
Join Date: Nov 2012
Location: USA
Watch: addiction issues
Posts: 37,355
|
You're going to want to trade for a RG 44 novelty, ceramic diver, or any Rolex with ceramic bezel. It's too costly to be constantly sending your watch for polish and replacing expensive gold bezels.
|
19 April 2015, 12:52 AM | #23 |
2024 Pledge Member
Join Date: Feb 2010
Real Name: Neil
Location: UK
Watch: ing ships roll in
Posts: 59,369
|
It's a beautiful watch and it's a great shame to sell it because of the psychological/emotional stress of a scratch on an expensive luxury item. Apart from a ceramic substitute idea, I would suggest you get it polished in 6 months by AP. That way you can relax and not worry if it gets another as you know it will be perfect in 6 months. Also by the time 6 months comes you probably will be more relaxed and less precious about your watch, as most of us become after a while, and you may not want to even have it polished at all by then and think the scratches add character and make the watch truly your own... and push back the polish another 6 months.
|
19 April 2015, 02:41 AM | #24 |
"TRF" Member
Join Date: Mar 2011
Location: NL
Posts: 18
|
Dont get it polished! The dissassembly and assembly of the watch are situations which are very likely to get additional scratches. The refinished parts are likely to be a bit off from other parts which is equally frustrating. Flip it or put it in a drawer for two weeks. Than you know if you really want to sell it because of the tiny scratch
|
20 April 2015, 01:34 AM | #25 | |
"TRF" Member
Join Date: Dec 2013
Location: Ha noi
Posts: 29
|
Quote:
I actually feel better after few days. Not all over it though... |
|
20 April 2015, 07:16 AM | #26 |
"TRF" Member
Join Date: Dec 2008
Real Name: B
Location: UK
Posts: 976
|
^^This
__________________
Current: 1: Rolex DSSD M 2008 2: Rolex Day-Date 40 YG White Dial Random 2018 3:Panerai Luminor Submersible Titanium PAM 25 2013 P Previous:[/B] 1: Rolex 16610 Y 2002 2: Rolex Daytona V 2008 3: Rolex 16610LV Z 2007 4: Rolex Milgauss 116400GV V 2008 5: Panerai Luminor Marina PR PAM 93 2005 6: AP ROO Diver H 2013 7: Rolex DJ II Slate w/ Grn Romans Random 2013 8:Panerai Submersible Ti PAM 25 2013 |
20 April 2015, 09:16 AM | #27 |
2024 Pledge Member
Join Date: Feb 2010
Real Name: Neil
Location: UK
Watch: ing ships roll in
Posts: 59,369
|
|
20 April 2015, 06:39 PM | #28 |
"TRF" Member
Join Date: Jul 2014
Location: Dubai
Watch: bipolar
Posts: 2,854
|
Any time i get a scratch or find a scratch i just say yolo. It actually gets me through
|
21 April 2015, 01:01 AM | #29 |
"TRF" Member
Join Date: Jan 2009
Real Name: Russel
Location: N/A
Watch: N/A
Posts: 755
|
Got my first ding after five months. Annoyed me as someone hit me with their watch when they made an abrupt hand gesture. But it's alright. Have other problems to OCD about.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.