ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Daniel · 25 January 2010, 11:23 PM

Looks great! I like it a lot!

bodybump · 25 January 2010, 11:32 PM

Quote:

Originally Posted by Deyn Man

astig kabayan!

this could also be the answer for those wanting a GMTIIC but not the PCLs!
really looks good!

Kabayan Salamat!!!

Quote:

Originally Posted by mrh1797

That is BAD A$$ Oscar!! Classy and sporty all in one!!!

Im just one text away Matt..

Quote:

Originally Posted by Imran

looks great! is it possible to also fit the GMT IIc bracelet onto the DJ that the Super Jubilee was taken from?
Imran

Hey Imran..yes it will do fit..i actually tried it on the DJ..

Quote:

Originally Posted by directioneng

Nice look on the jubilee Oscar.

Only one complaint - you need a BIGGER more SUBTLE watermark.

Thanks Eddie!!! I actually i did try a bigger one and little bit more noticable water mark..but couple guys ask me for another photo because they cant see the dial

So i try to adjust the opasity to have just a touch of the watermark so you can still see the beauty of the whole watch...

Yoreese · 25 January 2010, 11:33 PM

My favorite watch was TT GMT w/jubilee, Rolex should offer that bracelet as an option IMHO.

bodybump · 25 January 2010, 11:37 PM

Quote:

Originally Posted by swatty

I'm sure JJ knows

peter he even knows if Nato bands are coming this Basel..

Quote:

Originally Posted by Dan Pierce

You know I like it, Oscar!

dP

The number one fan of JUBILEE BY HEART!!!!

Quote:

Originally Posted by Gaijin

Sorry. Not a fan.

Not everyones cup of tea...

Quote:

Originally Posted by xjeeunitx

One word.

Verynicemyfriend.

Thanks Buddy!!!

Quote:

Originally Posted by Dreambaby

Looks great Oscar!

!

Im starting to love it actually..hahahaha

Quote:

Originally Posted by RJC

Sorry, not my cup of tea. Jubilees have a real 70's kind of look to me.

Quote:

Originally Posted by Rscmaine

That is SHARP

The SJ seems to balance the size much better - it creates the illusion of larger size and better integration to the design.

How is the weight versus the SEL oyster?

(Oh, yeah, I can't quite make out what your watermark says either...could you make it a bit bigger please?

)

I try to make it lighter because i want people to focus on the watch..but still have that watermark as a touch that says "YOU CANT STEAL THIS PHOTO"

Quote:

Originally Posted by buz-lh

Great look.

I wish Rolex offered it from the factory.

Im sure they are seeing this right now...

Welshwatchman · 25 January 2010, 11:39 PM

I like it, Oscar.

If a Pepsi/Coke GMTc comes into the offing at some stage then there's a good chance that I will move for one and fit it to a SJ like yours.

bodybump · 25 January 2010, 11:42 PM

Quote:

Originally Posted by Welshwatchman

I like it, Oscar.

If a Pepsi/Coke GMTc comes into the offing at some stage then there's a good chance that I will move for one and fit it to a SJ like yours.

Paul...this is what im waiting..a GMT Coke or Pepsi in ceramic on a Jubilee bracelet..that would be the next hot watch..I hope they have it coming..

theken · 25 January 2010, 11:44 PM

Thanks for your compliments Oscar but I have to pass it on to my friend Dan Pierce. We met at the Northern KY GTG last October. He showed me his GMT2
on a Super Jubilee. The older GMT2 with lug holes can also be used with a Jubilee bracelet with 555 endpieces.

bodybump · 25 January 2010, 11:53 PM

Quote:

Originally Posted by theken

Thanks for your compliments Oscar but I have to pass it on to my friend Dan Pierce. We met at the Northern KY GTG last October. He showed me his GMT2
on a Super Jubilee. The older GMT2 with lug holes can also be used with a Jubilee bracelet with 555 endpieces.

Your more than welcome..and Dans watches are killers when it come to jubilee..And thats so nice to know using that old style jubilee band...that would cost cheaper...

dalip · 26 January 2010, 12:00 AM

me like...very cool Oscar....

DWdrummer · 26 January 2010, 12:08 AM

In before JJ...

The jubiliee is such a nice option and looks great on these watches.

acce1999 · 26 January 2010, 01:21 AM

Looks good! But, it seems you have the old style brushed surface on the lugs, with an angle, rather than the latest straight lines. Is that correct? If so, why did you change style?

Anyway, The Jubilee is too good to only be offered to a limited number of models. It would also look great on the Daytona, and my hopes are that it will be offered as an option not only for the GMTIIc, but also for the Daytona, the Submariner and the Explorer. Tudor has a fliplock clasp version of the Jubilee bracelet that is very good, and with a fliplock clasp it is perfect for the professional line. Rolex: DO YOU HEAR ME?

Best,

A

Engi · 26 January 2010, 02:14 AM

Is the supejubilee perfectly fitting the GMTIIC lugs ? It seems that there is just a bit of space ...

Thanks for your reply.

Ciao

Engi

Wink · 26 January 2010, 02:18 AM

The Jubilee bracelett looks wonderful with that watch. Don't change it.

Best,
Wink

JBat · 26 January 2010, 02:22 AM

Looks good.

kcmo · 26 January 2010, 07:07 AM

That actually looks pretty good, Oscar!

Enjoy my friend!

chebert · 26 January 2010, 07:21 AM

i dont care for it too much .....looks kinda old school disco. but i do think its very nice.

armoredsaint · 26 January 2010, 07:27 AM

it does looks really nice!

rfknauss · 26 January 2010, 07:28 AM

Oscar, that bracelet looks great!

SLS · 26 January 2010, 07:34 AM

I like look! Is there any movement on the endlinks, not to nit pick, but there is a gap between the Case & SEL that I have noticed on this combo (not just yours Oscar)?
Scott

JJ Irani · 26 January 2010, 07:37 AM

Quote:

Originally Posted by Speed

Here comes JJ....!!!!

Yes, here I am.

That looks fantastic, Oscar............good move!!

mailman · 26 January 2010, 10:30 AM

Quote:

Originally Posted by bodybump

I was inspired with the post of Mark Theken..so here i got lucky to have both watches and tried to slap that super jubilee on the GMT SS Ceremic SIMPLY BEAUTIFUL!!!!!! Enjoy!!!(sorry for the crappy photos)

LOVE LOVE LOVE that look Oscar

Quote:

Originally Posted by dman

Taken with my Iphone on the fly, but you get the idea, Pare.

I like that look too bro

Is that an Omeega rubber you have there

If so, I bet it's buttah smooth

STEELINOX · 26 January 2010, 10:43 AM

Quote:

Originally Posted by SLS

I like look! Is there any movement on the endlinks, not to nit pick, but there is a gap between the Case & SEL that I have noticed on this combo (not just yours Oscar)?
Scott

Your right Scott !

The radius on the Super is for a DJ casing and the outside edge's or 'far corner points' meet the casing, leaving a, what appears to be about a less than mm 'gap' at the middle of the SEL; the look is wrong IYAM. It looks fine on the PreC GMTs, but it just doesnt cut it for M-Wa for the SuperCased ones !

Thanks,
Randy

Clogger · 26 January 2010, 10:44 AM

Both GMT's look great, really would be a cool option from Rolex to do this at factory.

Dan Pierce · 26 January 2010, 10:54 AM

[QUOTE=STEELINOX;1600914]Your right Scott !

The radius on the Super is for a DJ casing and the outside edge's or 'far corner points' meet the casing, leaving a, what appears to be about a less than mm 'gap' at the middle of the SEL; the look is wrong IYAM. It looks fine on the PreC GMTs, but it just doesnt cut it for M-Wa for the SuperCased ones !

Thanks,
Randy

That gap is exaggerated by the macro lens and is so tiny it's a non issue. I've seen larger gaps on original non SEL end links. Just my 2 cents.
dP

STEELINOX · 26 January 2010, 10:57 AM

[QUOTE=Dan Pierce;1600940]

Quote:

Originally Posted by STEELINOX

Your right Scott !

The radius on the Super is for a DJ casing and the outside edge's or 'far corner points' meet the casing, leaving a, what appears to be about a less than mm 'gap' at the middle of the SEL; the look is wrong IYAM. It looks fine on the PreC GMTs, but it just doesnt cut it for M-Wa for the SuperCased ones !

Thanks,
Randy

That gap is exaggerated by the macro lens and is so tiny it's a non issue. I've seen larger gaps on original non SEL end links. Just my 2 cents.
dP

It looks like it meets the PreC casing of yours Dan without that "macro" visual anomoly...
Here's one of your pictures, it doesnt quite illustrate the gap as its off angle to see it...

Dan Pierce · 26 January 2010, 11:03 AM

[QUOTE=STEELINOX;1600947]

Quote:

Originally Posted by Dan Pierce

It looks like it meets the PreC casing of yours Dan without that "macro" visual anomoly...

Have to admit I've not seen the super jubilee/ GMT IIc comb in person but here's a shot on my GMT II. And, it's covered by the bezel.
dP

STEELINOX · 26 January 2010, 11:04 AM

[QUOTE=Dan Pierce;1600961]

Quote:

Originally Posted by STEELINOX

Have to admit I've not seen the super jubilee/ GMT IIc comb in person but here's a shot on my GMT II. And, it's covered by the bezel.
dP

The supercase is still more pronounced; it looks like it fits more flush on yours...

STEELINOX · 26 January 2010, 11:05 AM

~gotta run to campus, b back in the bar later fellers !

TSW · 26 January 2010, 12:48 PM

Looks fantastic!!

dman · 26 January 2010, 01:52 PM

Quote:

Originally Posted by mailman

LOVE LOVE LOVE that look Oscar

I like that look too bro

Is that an Omeega rubber you have there

If so, I bet it's buttah smooth

Paulie, just a Hirsch but it is super comfy!

25 January 2010, 11:39 PM	#35
Welshwatchman "TRF" Member Join Date: Apr 2006 Real Name: Paul Location: Wales, UK Posts: 14,578	I like it, Oscar. If a Pepsi/Coke GMTc comes into the offing at some stage then there's a good chance that I will move for one and fit it to a SJ like yours. __________________ ..33

25 January 2010, 11:44 PM	#37
theken "TRF" Member Join Date: Mar 2009 Location: USA Watch: GMT-Master II Posts: 3,417	Thanks for your compliments Oscar but I have to pass it on to my friend Dan Pierce. We met at the Northern KY GTG last October. He showed me his GMT2 on a Super Jubilee. The older GMT2 with lug holes can also be used with a Jubilee bracelet with 555 endpieces. Attached Images

26 January 2010, 12:00 AM	#39
dalip "TRF" Member Join Date: Sep 2009 Real Name: Dalip Location: Mumbai and Perth Watch: Rolex PAM Omega Posts: 18,656	me like...very cool Oscar.... __________________ ------------------------------------------------------------ *"The liar's punishment is not in the least that he is not believed, but that he cannot believe anyone else." George Bernard Shaw*

26 January 2010, 07:28 AM	#48
rfknauss 2024 SubLV41 Pledge Member Join Date: Nov 2009 Real Name: Richard Location: Macungie, PA Watch: 5513 Sub, LV Sub Posts: 14,497	Oscar, that bracelet looks great! __________________ *"Few things in life give man as great a pleasure as wearing a Rolex!"* TRF's "AFTER DARK" Bar & NightClub Patron

26 January 2010, 07:34 AM	#49
SLS "TRF" Member Join Date: Aug 2006 Real Name: Scott Location: GMT -7 Watch: GMT's & Sub's Posts: 10,401	I like look! Is there any movement on the endlinks, not to nit pick, but there is a gap between the Case & SEL that I have noticed on this combo (not just yours Oscar)? Scott __________________ "The bitterness of poor quality remains long after the sweetness of lower price is forgotten." -Benjamin Franklin Member No. 922

25 January 2010, 11:23 PM	#31
Daniel "TRF" Member Join Date: Jun 2009 Location: NY Posts: 25	Looks great! I like it a lot!

25 January 2010, 11:33 PM	#33
Yoreese Member Join Date: Nov 2009 Real Name: Maurice Location: Margaritaville Watch: 114270 Explorer Posts: 212	My favorite watch was TT GMT w/jubilee, Rolex should offer that bracelet as an option IMHO.

26 January 2010, 12:08 AM	#40
DWdrummer Banned Join Date: Jul 2009 Location: Florida USA Posts: 954	In before JJ... The jubiliee is such a nice option and looks great on these watches.

26 January 2010, 01:21 AM	#41
acce1999 "TRF" Member Join Date: Mar 2008 Location: GMT+1 Posts: 2,711	Looks good! But, it seems you have the old style brushed surface on the lugs, with an angle, rather than the latest straight lines. Is that correct? If so, why did you change style? Anyway, The Jubilee is too good to only be offered to a limited number of models. It would also look great on the Daytona, and my hopes are that it will be offered as an option not only for the GMTIIc, but also for the Daytona, the Submariner and the Explorer. Tudor has a fliplock clasp version of the Jubilee bracelet that is very good, and with a fliplock clasp it is perfect for the professional line. Rolex: DO YOU HEAR ME? Best, A

26 January 2010, 02:14 AM	#42
Engi "TRF" Member Join Date: Jan 2008 Location: Everywhere Posts: 1,434	Is the supejubilee perfectly fitting the GMTIIC lugs ? It seems that there is just a bit of space ... Thanks for your reply. Ciao Engi

26 January 2010, 02:18 AM	#43
Wink Member Join Date: Apr 2009 Location: South Carolina Posts: 84	The Jubilee bracelett looks wonderful with that watch. Don't change it. Best, Wink

26 January 2010, 02:22 AM	#44
JBat "TRF" Member Join Date: Dec 2007 Real Name: John Location: Washington Watch: 16710, 16610, DJ Posts: 7,329	Looks good.

26 January 2010, 07:07 AM	#45
kcmo "TRF" Member Join Date: Jan 2007 Real Name: Karis Location: USA Posts: 19,377	That actually looks pretty good, Oscar! Enjoy my friend!

26 January 2010, 07:21 AM	#46
chebert Member Join Date: Dec 2009 Location: New Orleans Watch: TT GMT IIC Posts: 299	i dont care for it too much .....looks kinda old school disco. but i do think its very nice.

26 January 2010, 07:27 AM	#47
armoredsaint "TRF" Member Join Date: Dec 2009 Real Name: Bubba Location: Ohio, USA Watch: GMT Master IIc SS Posts: 318	it does looks really nice!

26 January 2010, 10:44 AM	#53
Clogger Member Join Date: Jan 2010 Location: SE Asia Watch: SS Sub Date Posts: 431	Both GMT's look great, really would be a cool option from Rolex to do this at factory.

26 January 2010, 10:54 AM	#54
Dan Pierce 2024 Pledge Member Join Date: Dec 2006 Real Name: D'OH! Location: Kentucky Watch: Rolex-1 Tudor-3 Posts: 36,216	[QUOTE=STEELINOX;1600914]Your right Scott ! The radius on the Super is for a DJ casing and the outside edge's or 'far corner points' meet the casing, leaving a, what appears to be about a less than mm 'gap' at the middle of the SEL; the look is wrong IYAM. It looks fine on the PreC GMTs, but it just doesnt cut it for M-Wa for the SuperCased ones ! Thanks, Randy That gap is exaggerated by the macro lens and is so tiny it's a non issue. I've seen larger gaps on original non SEL end links. Just my 2 cents. dP __________________ TRF Member# 1668 Bass Player in TRF "AFTER DARK" Bar & NightClub Band Commander-in-Chief of The Nylon Nation The Crown & Shield Club Honorary Member of P-Club

26 January 2010, 11:05 AM	#58
STEELINOX 2024 SubLV41 Pledge Member Join Date: Oct 2008 Real Name: Sink-O! Location: a praire in AZ Watch: ROLEX-less atm... Posts: 14,021	~gotta run to campus, b back in the bar later fellers ! __________________ *Positive Waves Baby* Lug Hole Loyalist / Chamfer Line Inspector INFORTHE WIN SUB-MAH-REEEN-ER ~ !

26 January 2010, 12:48 PM	#59
TSW "TRF" Member Join Date: Feb 2009 Real Name: TSW Location: Le Brassus Watch: Rolex & AP's Posts: 27,449	Looks fantastic!! __________________ AP Owners Club IG @swiss.watch.connection

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)