ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

EchoBlueUK · 1 March 2011, 06:02 AM

Although results are good i'm scared of ruining the finish if a slip onto the brushed areas.

MonBK · 1 March 2011, 06:06 AM

Quote:

Originally Posted by EchoBlueUK

Although results are good i'm scared of ruining the finish if a slip onto the brushed areas.

See my previous post.

z0mghenry · 1 March 2011, 01:28 PM

So I got my first hairline scratch on the side of the case on my new SubC. It's been bothering me and I want to try this out. For those of you in Atlanta, I'll save you some time and tell you that Ace hardware stores carry these.

sailmed · 1 March 2011, 11:33 PM

The stuff is amazing. I use it regularly to polish the alloy on the car in my avatar. It is the best product I have found so far, and I have tried most of them over the years.

sea-dweller · 2 March 2011, 02:59 AM

Thanks, nice photos!

threemonkeys · 4 March 2011, 12:43 PM

My watch had a few scratches when I bought it. Kind of annoyed he heck out of me. I went to True Value Hardware and bought the Cape Cod. Works great. Just take it nice and slow.

GMTJOHNNY · 4 March 2011, 01:31 PM

Off to the store tomorrow to get them. Got a hairline scrratch on the side of my GMTIIC. Thanks for the advice!

bmwboris · 5 March 2011, 04:25 PM

Gents,

Would anyone know if these cloths work on other polished metals other than stainless steel?

Numismatist · 5 March 2011, 11:12 PM

Quote:

Originally Posted by bmwboris

Gents,

Would anyone know if these cloths work on other polished metals other than stainless steel?

yes they do; however, be carefule as what they do is actually remove a layer of metal each time you use them.

Too many polishings and you could loose the sharpness to your lugs for example.

MonBK · 5 March 2011, 11:18 PM

Quote:

Originally Posted by bmwboris

Gents,

Would anyone know if these cloths work on other polished metals other than stainless steel?

Reading of the package: Cleans & polishes silver, gold, pewter, brass, copper, bronze, nickel, aluminum, chrome, stainless steel.

thekino · 18 April 2011, 06:38 AM

Quote:

Originally Posted by safwan

I have Rolex Sub 16610 and GMT Master both are all SS and its brushed (center link is not shiny). Can I use Cape Cod cloth to remove scratches? or somthing else. I read on some forum that I user Autosolve instead as Cape Cod is only for shiny surface. Let me know please.

Thanks.

Great question! I too have a 16610 (the "LV"), and I wanted to polish up the watch, but I don't want to have to rebrush anything (sounds too risky). Should I use the Wenol Blue & Red, and the Cape Cod cloths? Or will it look weird and force me to "rebrush".

Aside from the brushed SS parts, I have a few nicks and dings I want to take care of.

Here's a pic to give you an idea of the "brushed" look on my particular watch.

LMP · 3 May 2011, 05:06 AM

What is the effect of not wearing gloves with Cape Cod?

Numismatist · 3 May 2011, 05:10 AM

Quote:

Originally Posted by LMP

What is the effect of not wearing gloves with Cape Cod?

The watch comes out the same

Seriously, I have not used the gloves. I'm fine.

qualitynerd · 3 May 2011, 07:43 AM

Wow nice photos. NICE DATEJUST!

I have a Movado Eliro which has a stainless steal bracelet and case. Any suggestions on how to remove minor scuffs and hairline scratches?

thekino · 3 May 2011, 11:10 AM

Anything on the brushed stainless steel problem, gents?

Numismatist · 3 May 2011, 09:16 PM

Quote:

Originally Posted by thekino

Anything on the brushed stainless steel problem, gents?

Yes, there are a few brush pens available that you can use to brush out those parts. Otto Frei has a few, I'll try to post the link later today.

SL1229 · 31 May 2011, 07:02 PM

Will this work on white gold as well? I know ppl have stated gold, but wanted to be specific if it works only on YG or WG or both.

Numismatist · 31 May 2011, 08:38 PM

Quote:

Originally Posted by SL1229

Will this work on white gold as well? I know ppl have stated gold, but wanted to be specific if it works only on YG or WG or both.

Yes; however, as stated, Cape Cod removes a tiny layer of the material (in this case - gold) from your watch...so use sparingly and only once in a while.

xjeeunitx · 31 May 2011, 08:39 PM

Quote:

Originally Posted by SL1229

Will this work on white gold as well? I know ppl have stated gold, but wanted to be specific if it works only on YG or WG or both.

No. I wouldn't use this on WG. WG shines the way it does because of the rhodium plating. True color of WG is silver with a faint yellow color to it.

Ultraman · 31 May 2011, 09:38 PM

Nice work!

watchf · 31 May 2011, 09:51 PM

Quote:

Originally Posted by SL1229

Will this work on white gold as well? I know ppl have stated gold, but wanted to be specific if it works only on YG or WG or both.

I think it will work on Rolex's WG since its a mixture rather than plated but probably not on other sort of WG since those are normally plated.

SL1229 · 1 June 2011, 12:24 PM

Has anyone tried using this stuff on WG? results? thanks

raskal83 · 11 June 2011, 01:35 PM

Quote:

Originally Posted by z0mghenry

So I got my first hairline scratch on the side of the case on my new SubC. It's been bothering me and I want to try this out. For those of you in Atlanta, I'll save you some time and tell you that Ace hardware stores carry these.

I have some minor hairline scratches on one side of my case that is bothering me a bit, but as everyone knows scratches will come with wear so might hold off a bit before using this product as I don't want to wear the case down. Has anyone documented their experience with polishing their case? and if so how many wipes does it take to get rid of them.

jimchan · 12 June 2011, 01:28 AM

I've no courage to try this. Only choice is to send them in to AD when my Rolly is due for maintainence

rolexpawn · 12 June 2011, 02:50 AM

I have a complete Rolex first aid kit for cleaning and servicing my watch. I usually work on my Rolex once a month to keep it looking fresh.

dana h · 15 June 2011, 09:07 AM

Always wanted to try, will do so soon.

ed21x · 18 June 2011, 07:40 PM

careful guys... cape cod is actually quite aggressive, so use sparingly. For a more refined solution, i suggest sunshine polishing cloth, which takes off less per swipe, and is completely dry. As for the brushed parts (ie bracelet), I suggest removing the bracelet first and then using a scotchbright pad for a few quick swipes in the direction of the grain will bring it back to new quickly.

thekino · 23 August 2011, 01:49 PM

Thanks ed21x, that's a good suggestion. I think I'll give it a try.

Andad · 23 August 2011, 03:37 PM

Quote:

Originally Posted by xjeeunitx

No. I wouldn't use this on WG. WG shines the way it does because of the rhodium plating. True color of WG is silver with a faint yellow color to it.

Not on the later Rolex WG.

xjeeunitx · 27 August 2011, 12:22 AM

Quote:

Originally Posted by directioneng

Not on the later Rolex WG.

Good copy! I did not know that. Thanks for the info.

Also, if anyone didn't know, cape cod polish cloth works for getting out faint scratches on sapphire crystals. But, be aware to not use on crystals with AR coating on the outside as the cloth will completely take off the coating.

1 March 2011, 11:33 PM	#34
sailmed "TRF" Member Join Date: May 2008 Real Name: Barry Location: Newtown Square Watch: Red Sub, 5513, FF Posts: 299	The stuff is amazing. I use it regularly to polish the alloy on the car in my avatar. It is the best product I have found so far, and I have tried most of them over the years. __________________ "Primum non nocere."

2 March 2011, 02:59 AM	#35
sea-dweller "TRF" Member Join Date: Oct 2007 Real Name: Dennis Location: Bay Area - 925 Posts: 40,018	Thanks, nice photos! __________________ TRF Member #6699 (since September 2007)

4 March 2011, 01:31 PM	#37
GMTJOHNNY "TRF" Member Join Date: Dec 2007 Real Name: John Location: LONG ISLAND, NY Watch: 2007 DAY DATE 18KT Posts: 1,378	Off to the store tomorrow to get them. Got a hairline scrratch on the side of my GMTIIC. Thanks for the advice! __________________ ROLEX DAY DATE 118238 (2007) ROLEX DAY DATE 18238 (1997) ROLEX GMT 16750 PEPSI (1987) ROLEX AIR KING 14000 (1991) ROLEX GMTIIC TT 116713LN (2008)

1 June 2011, 12:24 PM	#52
SL1229 "TRF" Member Join Date: May 2011 Real Name: Sam Location: Washington Watch: the jewels Posts: 190	anyone try it? Has anyone tried using this stuff on WG? results? thanks

12 June 2011, 02:50 AM	#55
rolexpawn Banned Join Date: Jun 2011 Real Name: Chester Location: Bolton UK Watch: my Rolex(s) Posts: 479	I have a complete Rolex first aid kit for cleaning and servicing my watch. I usually work on my Rolex once a month to keep it looking fresh. Attached Images

1 March 2011, 06:02 AM	#31
EchoBlueUK "TRF" Member Join Date: May 2009 Location: UK Posts: 1,543	Although results are good i'm scared of ruining the finish if a slip onto the brushed areas.

1 March 2011, 01:28 PM	#33
z0mghenry "TRF" Member Join Date: Jan 2011 Real Name: Henry Location: GA Posts: 617	So I got my first hairline scratch on the side of the case on my new SubC. It's been bothering me and I want to try this out. For those of you in Atlanta, I'll save you some time and tell you that Ace hardware stores carry these.

4 March 2011, 12:43 PM	#36
threemonkeys "TRF" Member Join Date: Feb 2011 Real Name: Craig Location: Seattle-ish, USA Watch: GMTIIc, AK, LVc Posts: 7,022	My watch had a few scratches when I bought it. Kind of annoyed he heck out of me. I went to True Value Hardware and bought the Cape Cod. Works great. Just take it nice and slow.

5 March 2011, 04:25 PM	#38
bmwboris "TRF" Member Join Date: Oct 2010 Real Name: Con Location: Sydney, Australia Watch: Too many Posts: 125	Gents, Would anyone know if these cloths work on other polished metals other than stainless steel?

3 May 2011, 05:06 AM	#42
LMP "TRF" Member Join Date: Apr 2007 Real Name: Lawson Location: Santa Fe, NM Watch: GMT's, Subs, OQ's Posts: 152	What is the effect of not wearing gloves with Cape Cod?

3 May 2011, 07:43 AM	#44
qualitynerd "TRF" Member Join Date: May 2011 Location: Dallas, TX Posts: 13	Wow nice photos. NICE DATEJUST! I have a Movado Eliro which has a stainless steal bracelet and case. Any suggestions on how to remove minor scuffs and hairline scratches?

3 May 2011, 11:10 AM	#45
thekino "TRF" Member Join Date: Dec 2008 Real Name: Dan Location: New York, NY Watch: Rolex 16610LV Posts: 23	Anything on the brushed stainless steel problem, gents?

31 May 2011, 07:02 PM	#47
SL1229 "TRF" Member Join Date: May 2011 Real Name: Sam Location: Washington Watch: the jewels Posts: 190	Will this work on white gold as well? I know ppl have stated gold, but wanted to be specific if it works only on YG or WG or both.

31 May 2011, 09:38 PM	#50
Ultraman "TRF" Member Join Date: Apr 2009 Location: Australia Posts: 2,175	Nice work!

12 June 2011, 01:28 AM	#54
jimchan Member Join Date: Jun 2011 Location: Singapore Posts: 58	I've no courage to try this. Only choice is to send them in to AD when my Rolly is due for maintainence

15 June 2011, 09:07 AM	#56
dana h "TRF" Member Join Date: Oct 2010 Location: MA Posts: 20	Always wanted to try, will do so soon.

18 June 2011, 07:40 PM	#57
ed21x "TRF" Member Join Date: Jun 2011 Location: CA Posts: 26	careful guys... cape cod is actually quite aggressive, so use sparingly. For a more refined solution, i suggest sunshine polishing cloth, which takes off less per swipe, and is completely dry. As for the brushed parts (ie bracelet), I suggest removing the bracelet first and then using a scotchbright pad for a few quick swipes in the direction of the grain will bring it back to new quickly.

23 August 2011, 01:49 PM	#58
thekino "TRF" Member Join Date: Dec 2008 Real Name: Dan Location: New York, NY Watch: Rolex 16610LV Posts: 23	Thanks ed21x, that's a good suggestion. I think I'll give it a try.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)