**OFFICIAL RICHARD MILLE PIC THREAD (and daily snap shots)**

[APhound]

Congrats Turf! Really happy for you.
You guys are living the good life over here


Sent from my iPhone using Tapatalk

[turfmanjon]

Originally Posted by APhound

Congrats Turf! Really happy for you.
You guys are living the good life over here


Sent from my iPhone using Tapatalk

Thanks my friend! Give it a test drive next time you’re in town! You’re up next!


Sent from my iPhone using Tapatalk

[7sins]

Originally Posted by turfmanjon

Thanks Richard! Looking forward to playing with some strap options. Do you change yourself, and if so, did you buy the specific screwdriver online? The boutique strongly recommended against me doing myself as also voids the warranty.


Sent from my iPhone using Tapatalk

I can't fathom this to be true, perhaps your SA is misinformed. There is no chance they would know if you swapped the strap yourself, I have seen my SA change the strap infront of me, it is no different than doing it yourself. I've changed my straps, 100s of times myself, the entire boutique knows it and when my 030 went into service, I had no issue. Would not let them deter you from changing the straps, just make sure you don't lose the screws.

Congrats on the new watch!

[turfmanjon]

Originally Posted by 7sins

I can't fathom this to be true, perhaps your SA is misinformed. There is no chance they would know if you swapped the strap yourself, I have seen my SA change the strap infront of me, it is no different than doing it yourself. I've changed my straps, 100s of times myself, the entire boutique knows it and when my 030 went into service, I had no issue. Would not let them deter you from changing the straps, just make sure you don't lose the screws.

Congrats on the new watch!

Great to know, thanks! I ordered the Horofix 4 prong screwdriver from Esslinger. For the deployant screw, is that just a standard flat screwdriver like on Patek, etc?

Also, any advice on the process to change the crown rubber? Toothpick to pry it up and off?

Again, appreciate all the insight from this thread!


Sent from my iPhone using Tapatalk

[7sins]

Originally Posted by turfmanjon

Great to know, thanks! I ordered the Horofix 4 prong screwdriver from Esslinger. For the deployant screw, is that just a standard flat screwdriver like on Patek, etc?

Also, any advice on the process to change the crown rubber? Toothpick to pry it up and off?

Again, appreciate all the insight from this thread!


Sent from my iPhone using Tapatalk

This will help: https://www.watchprosite.com/richard...41666.2177796/

One tip is to push the strap into the case as you screw down, especially if it is a velcro/nylon strap. Just be careful to not slip as the case scratches easily. After a few attempts, should be able to swap the strap in less than 3 minutes.

[turfmanjon]

Originally Posted by 7sins

This will help: https://www.watchprosite.com/richard...41666.2177796/

One tip is to push the strap into the case as you screw down, especially if it is a velcro/nylon strap. Just be careful to not slip as the case scratches easily. After a few attempts, should be able to swap the strap in less than 3 minutes.

Awesome thanks for the tips!


Sent from my iPhone using Tapatalk

[PreferHackingSeconds]

Originally Posted by turfmanjon

FIRST RM INCOMING!! After many years of circling around RM at a distance as I didn’t appreciate the brand, and wearing lots of other pieces from Rolex, AP, PP, etc, I decided to give it a try. I read this entire thread start to finish at least once, and visited my grey and RM boutique to try on all relevant models. As many of you know, they are all awesome in their own way, and would love to have them all. I decided to start with something to wear as a daily, so wanted a smaller case size and understated look.

I was stuck on which sports model to get, as some had many colors, were too thick for long sleeves, hard to get, expensive, etc. So I thought a 67-01 would do the trick, granted it wasn’t 100% what I wanted, as was hoping to get a sports piece with the various layers of sapphire.

I put in a request for this but got a unique offer. RM was quietly releasing a few brand new RM010’s in Ti and my boutique was allocated one that was coming in a few days. My SA went to bat for me with corporate as a potential new customer and was able to offer this to me. Timing happened to work out in my favor. I picked it up yesterday and absolutely love it! I’m getting a white strap for summer and plan to wear this daily.

I can easily wear the larger pieces, having a flat 7.5” wrist and being 6’2”, and initially requested a 65-01. But this just fits so perfectly and is thin at 13mm. Looking forward to enjoying this for a long time and maybe adding a 67-02 Ogier next.

These are impossible to photograph so here’s a few pics. Appreciate everyone’s guidance along the way!



Sent from my iPhone using Tapatalk

Massive congrats! That is probably my favourite piece. I've been looking to get into RM and was told the 67-01 is probably the best way to start by the boutique until recently when they mentioned that the RM010 is back. As much as I love the 67-01, I was always thinking the 005,010 and 029 were more appealing to me but bummed they didn't make these models in that size anymore. Just hoping that one comes through one day in case they discontinue it again.

It ticks all my boxes and it has the classic Tonneau shape and size and in Titanium from the early days when they started! Enjoy the new watch in the best of health!!

[turfmanjon]

Originally Posted by PreferHackingSeconds

Massive congrats! That is probably my favourite piece. I've been looking to get into RM and was told the 67-01 is probably the best way to start by the boutique until recently when they mentioned that the RM010 is back. As much as I love the 67-01, I was always thinking the 005,010 and 029 were more appealing to me but bummed they didn't make these models in that size anymore. Just hoping that one comes through one day in case they discontinue it again.

It ticks all my boxes and it has the classic Tonneau shape and size and in Titanium from the early days when they started! Enjoy the new watch in the best of health!!

Thanks so much! It sounds like you are in the exact same dilemma I was in just recently. I wanted a sports model, but none were exactly what I wanted as my first piece, so I decided on the 67-01. I got lucky with my timing and hope they continue to offer the 010 to new customers. It’s a great way to get into the brand and it does tick a lot of boxes at a reasonable price. Hope it works out for you too!


Sent from my iPhone using Tapatalk

[watchman124]

Originally Posted by rmlovett1

From the race in Austin TX….




Sent from my iPad using Tapatalk Pro

Awesome photos - what a race to see! 1/2 Ferrari win!!!!

[watchman124]

Changed the strap to white rubber on the 67-02 and love it. Brings out the colors on the dial more.


Sent from my iPhone using Tapatalk

[turfmanjon]

Originally Posted by watchman124

Changed the strap to white rubber on the 67-02 and love it. Brings out the colors on the dial more.


Sent from my iPhone using Tapatalk

Looks great! Do you prefer the rubber with deployant or Velcro?


Sent from my iPhone using Tapatalk

[watchman124]

Originally Posted by turfmanjon

Looks great! Do you prefer the rubber with deployant or Velcro?


Sent from my iPhone using Tapatalk

I like both for different reasons. The rubber gives it a more aggressive look and ups the level of sportiness but the Velcro is comfortable on a level that’s hard to put into words. However, I think after a couple days I gotta say I’m really liking it on the rubber.


Sent from my iPhone using Tapatalk

[turfmanjon]

Originally Posted by watchman124

I like both for different reasons. The rubber gives it a more aggressive look and ups the level of sportiness but the Velcro is comfortable on a level that’s hard to put into words. However, I think after a couple days I gotta say I’m really liking it on the rubber.


Sent from my iPhone using Tapatalk

I like both looks. I have rubber on my 10 and it’s super comfortable. I tried yours on with red Velcro and disappeared on my wrist. Both are awesome. Wish Velcro was water resistant.


Sent from my iPhone using Tapatalk

[7sins]

Originally Posted by watchman124

Changed the strap to white rubber on the 67-02 and love it. Brings out the colors on the dial more.


Sent from my iPhone using Tapatalk

This looks awesome on white strap. Would love to see it with a dark green or dark red strap to match the other colors on the dial and the red on the crown.

[conkers]

Originally Posted by turfmanjon

I ordered the Horofix 4 prong screwdriver from Esslinger.

I was inspired to change some RM straps by this debate, and when I dug out my old 4-prong RM screwdriver and tried it on my 65 NTPT, it was too big to fit in the hole. A bit bizarre as it fitted in the past on other models. Are you using the 2.35mm or 2.75mm blade for the Horofix please?

[turfmanjon]

Originally Posted by conkers

I was inspired to change some RM straps by this debate, and when I dug out my old 4-prong RM screwdriver and tried it on my 65 NTPT, it was too big to fit in the hole. A bit bizarre as it fitted in the past on other models. Are you using the 2.35mm or 2.75mm blade for the Horofix please?

It’s funny you say this, as I tried to remove my strap but neither size blade fit. I was scratching my head as it didn’t make sense. I gave up as didn’t want to force it. So for now, I assumed my Horofix wasn’t the correct model for my watch. I wonder if RM changed screw sizes recently? I was going to have the first change done at the boutique when my strap arrives and ask them what the deal is.


Sent from my iPhone using Tapatalk

[conkers]

Originally Posted by turfmanjon

It’s funny you say this, as I tried to remove my strap but neither size blade fit. I was scratching my head as it didn’t make sense. I gave up as didn’t want to force it. So for now, I assumed my Horofix wasn’t the correct model for my watch. I wonder if RM changed screw sizes recently? I was going to have the first change done at the boutique when my strap arrives and ask them what the deal is.


Sent from my iPhone using Tapatalk

Thank you - I can’t tell if the tool fits the screw head as the aperture in the case is too small for the blade to sit in it. I will buy a 2.35mm 4 prong and see if that works. My existing one is 2.6mm. As mentioned above I think the Horobox comes with two different sized blades.

[turfmanjon]

Originally Posted by conkers

Thank you - I can’t tell if the tool fits the screw head as the aperture in the case is too small for the blade to sit in it. I will buy a 2.35mm 4 prong and see if that works. My existing one is 2.6mm. As mentioned above I think the Horobox comes with two different sized blades.

Yes my Horofix came with both sized tips. On my brand new 010, I couldn’t get either size to fit after a few attempts. So I shut it down before making a mess of the screws.

Let me know if you have better luck.


Sent from my iPhone using Tapatalk

[conkers]

Thank you. So that implies even the 2.35mm version is too much for the hole in the case. I have ordered one anyway.

Can anyone who has had success opine on the size of screwdriver head please?

@7sins @watchman124 - any guidance please?

[subtona]

Originally Posted by watchman124

Changed the strap to white rubber on the 67-02 and love it. Brings out the colors on the dial more.


Sent from my iPhone using Tapatalk

Great looking watch

[watchman124]

Originally Posted by conkers

Thank you. So that implies even the 2.35mm version is too much for the hole in the case. I have ordered one anyway.

Can anyone who has had success opine on the size of screwdriver head please?

@7sins @watchman124 - any guidance please?

I always end up taking mine to the boutique because I haven’t had much luck with screwdrivers myself.


Sent from my iPhone using Tapatalk

[conkers]

Originally Posted by watchman124

I always end up taking mine to the boutique because I haven’t had much luck with screwdrivers myself.

Ok thanks. That’s what I have done historically but less comfortable if my local boutique had not supplied the specific watch originally.

[raclaims]

Man that looks great...mine is on the pull strap thing...not as elegant...could def use an update!

[7sins]

Originally Posted by conkers

Thank you. So that implies even the 2.35mm version is too much for the hole in the case. I have ordered one anyway.

Can anyone who has had success opine on the size of screwdriver head please?

@7sins @watchman124 - any guidance please?

Contact Strap.King on IG, I bought my RM screwdriver from him and have had zero issues with changing my straps on various RMs over the years. My apologies but I am not definitive of the exact mm sizing of my strap tool. He is overpriced but knowledgeable and has great access to many rare straps.

[conkers]

Originally Posted by 7sins

Contact Strap.King on IG, I bought my RM screwdriver from him and have had zero issues with changing my straps on various RMs over the years. My apologies but I am not definitive of the exact mm sizing of my strap tool. He is overpriced but knowledgeable and has great access to many rare straps.

OK thank you.

[Derpy33]

Originally Posted by rmlovett1

From the race in Austin TX….




Sent from my iPad using Tapatalk Pro

Leclerc approved!

apparently he was in the BH boutique a day or two before the race xD

[westoque]

Got an offer for a 67-01 in Rose Gold but I'm really wanting the Ti. I really think RM shines in the technical materials like Ti and that the Ti is more discreet and more my style.

Curious on what people think about the 67-01 Rose Gold and RMs Rose Gold execution in general?

[ars1g09]

Originally Posted by westoque

Got an offer for a 67-01 in Rose Gold but I'm really wanting the Ti. I really think RM shines in the technical materials like Ti and that the Ti is more discreet and more my style.

Curious on what people think about the 67-01 Rose Gold and RMs Rose Gold execution in general?

i dont understand why people are so indifferent about the 67-01 RG (which is very much reflected in its sub-retail secondary prices) - to me its one of the few pieces from RM that I would wear.

It's unmistakably an RM piece and it's dial design retains that 'high performance machine' aura, but its not as chunky and bulky as their other pieces - giving it a more refined look. The rose gold gives it that extra 'pop' without the ostentatiousness usually associated with gold, as it's balanced out by the mechanical design.