ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

NEW · 11 January 2011, 02:49 PM

Quote:

Originally Posted by dhh

Actually milled an extra bezel and had an insert made for it. I am working on more efficient methods to make them quicker. Takes about 2 months.

So are you selling them? If so the cost please.

harry in montreal · 11 January 2011, 03:05 PM

i think the yachtmaster with the red date is the coolest subtle mod. Sandro, WTF happened to those to rolexes you depicted?

dhh · 11 January 2011, 03:24 PM

Quote:

Originally Posted by NEW

So are you selling them? If so the cost please.

Right now I am just goofing around trying to make a few but hopefully I will have a few to offer up to my close friends here.

Cheapest they would be is about $600 or so which includes the cost of a new bezel. Pretty labor intensive right now though.

I will have a few more pics next week. Everything is in pieces again. Going to see what it looks like on a 116520 with a Panda dial. That could look pretty slick.

Poohsan · 11 January 2011, 05:10 PM

Gone but not forgotten.... GMT II with white dial from Explorer II

JIFF1975 · 11 January 2011, 05:27 PM

Quote:

Originally Posted by Dreambaby

I love that! Very nice! I sent you a PM.

I can source them for you...

PM sent

The Waddler · 11 January 2011, 08:53 PM

Quote:

Originally Posted by Poohsan

There have been some utterly awesome mods on this thread (and what a thread) - but I have to take my hat of to this GMT/Explorer hybrid. Great imagination and it's one handsome watch

johnbeth · 11 January 2011, 09:24 PM

Can someone or does someone have a picture showing a mod of a SS Daytona with a Meteorite dial from a WG version???

TSW · 11 January 2011, 11:04 PM

Quote:

Originally Posted by johnbeth

Can someone or does someone have a picture showing a mod of a SS Daytona with a Meteorite dial from a WG version???

That would be my Grail mod

Too bad the dial cost the same as a pre-loved Submariner

johnbeth · 11 January 2011, 11:28 PM

Quote:

Originally Posted by TSW

That would be my Grail mod

Too bad the dial cost the same as a pre-loved Submariner

Im thinking of doing it!!

however I dont want to destroy the authenticity of two watches!

TSW · 11 January 2011, 11:32 PM

Quote:

Originally Posted by johnbeth

Im thinking of doing it!!

however I dont want to destroy the authenticity of two watches!

I wouldn't mind it at all, No problem swapping the dials back if it would feel weird

johnbeth · 11 January 2011, 11:37 PM

Quote:

Originally Posted by TSW

I wouldn't mind it at all, No problem swapping the dials back if it would feel weird

So u reckon I should do it??

I am not happy on the idea if the watch is not original is not a Rolex..... Or am I been too fussy??

TSW · 11 January 2011, 11:44 PM

Quote:

Originally Posted by johnbeth

So u reckon I should do it??

I am not happy on the idea if the watch is not original is not a Rolex..... Or am I been too fussy??

Original parts = Original watch

Go for it

johnbeth · 11 January 2011, 11:49 PM

Quote:

Originally Posted by TSW

Original parts = Original watch

Go for it

Let me see what I can do.

mitchy · 12 January 2011, 12:20 AM

Quote:

Originally Posted by johnbeth

Let me see what I can do.

i agree johnny boy!! you know my feelings!!! but im pretty sure ii was the one who told you to do that!!!

mitchy · 12 January 2011, 12:21 AM

Quote:

Originally Posted by johnbeth

Let me see what I can do.

also your sooo indecisive!!! pik one of you options and stick to it!!!

johnbeth · 12 January 2011, 12:00 PM

Quote:

Originally Posted by x06verdm

i agree johnny boy!! you know my feelings!!! but im pretty sure ii was the one who told you to do that!!!

I know, it was a great idea thats why im am really thinking about it!

Quote:

Originally Posted by x06verdm

also your sooo indecisive!!! pik one of you options and stick to it!!!

I am so confused!! I dont know what I want!

chrisshank · 12 January 2011, 12:06 PM

Awesome pics! I'd really love to see a GMTIIc with brushed center links...

kyle L · 12 January 2011, 12:18 PM

This looks cool:

B. Doggy · 12 January 2011, 12:21 PM

Entertaining thread!

ingoodtime · 12 January 2011, 12:24 PM

Quote:

Originally Posted by JIFF1975

And my last...

A green datewheel on a GMTII/C to match the green GMT hand

Now I like that green date wheel! Please PM me with what that costs to get done and where the green wheel comes from.

Davvan · 12 January 2011, 06:48 PM

Found these pix of two odd balls on another forum......creative must say!!

NEW · 12 January 2011, 07:41 PM

[QUOTE=Davvan;2269921]Found these pix of two odd balls on another forum......creative must say!!

[/QU

TheVTCGuy · 12 January 2011, 08:20 PM

Quote:

Originally Posted by JIFF1975

Great Jocke!

My DSSD has a red datewheel waiting for it!

Do you think I should fit in a red second hands as well?

Me Too! I'm getting one for my Daytona!!!

Oh... uh.... wait a minute....

JIFF1975 · 12 January 2011, 08:51 PM

Quote:

Originally Posted by TheVTCGuy

Me Too! I'm getting one for my Daytona!!!

Oh... uh.... wait a minute....

What do you guys think...

Will the red datewheel look good in my SDDS?

JIFF1975 · 12 January 2011, 10:12 PM

Some of you guys asked me (via PM) if the datewheel was on OEM part. Yes it is...

Here is a picture from the back of the part. In the chip Rolex uses you can even see the crown.

Here is another picture from the blue insert, same packing

All OEM parts...

steve1985 · 13 January 2011, 12:49 AM

Quote:

Originally Posted by JIFF1975

And my last...

A green datewheel on a GMTII/C to match the green GMT hand

How did you do this? I want one! can you get an AD to change the date wheel?

RobY330i · 13 January 2011, 01:09 AM

What an entertaining post!

JIFF1975 · 13 January 2011, 02:51 AM

Quote:

Originally Posted by steve1985

How did you do this? I want one! can you get an AD to change the date wheel?

You can better go to an non AD Rolex specialist...

dannyboy123 · 13 January 2011, 07:07 AM

I have a 12 yr old sub. Is it possible for me to get/fit a green bezel insert. My local AD said it couldn't be done. By the way I'm not talking about the newer ceremaic insert, but the older/first gen insert.

JIFF1975 · 13 January 2011, 05:48 PM

Quote:

Originally Posted by dannyboy123

I have a 12 yr old sub. Is it possible for me to get/fit a green bezel insert. My local AD said it couldn't be done. By the way I'm not talking about the newer ceremaic insert, but the older/first gen insert.

Which reference does your sub has?

11 January 2011, 05:10 PM	#64
Poohsan "TRF" Member Join Date: Aug 2007 Real Name: Arron Location: phoenix, AZ Watch: GMT 1675 Posts: 764	Gone but not forgotten.... GMT II with white dial from Explorer II __________________ 1680, 1675, 116610LN, GMT Master II, Explorer II, Tudor Big Block 79170

12 January 2011, 12:21 PM	#79
B. Doggy "TRF" Member Join Date: Aug 2008 Real Name: Bryan Location: Oregon Posts: 7,399	Entertaining thread! __________________ Rolex / Panerai / Omega

12 January 2011, 06:48 PM	#81
Davvan "TRF" Member Join Date: Jan 2008 Real Name: David Location: Location Location Watch: out..make way!! Posts: 726	Found these pix of two odd balls on another forum......creative must say!! __________________ Mare Nostrum

12 January 2011, 07:41 PM	#82
NEW "TRF" Member Join Date: Aug 2010 Location: Free Watch: MANY Posts: 373	[QUOTE=Davvan;2269921]Found these pix of two odd balls on another forum......creative must say!! [/QU __________________ Time is one thing you will never have enough of, so keep track with a nice watch.

11 January 2011, 03:05 PM	#62
harry in montreal "TRF" Member Join Date: Jan 2009 Location: Montreal Watch: The Habs pick 1st! Posts: 3,589	i think the yachtmaster with the red date is the coolest subtle mod. Sandro, WTF happened to those to rolexes you depicted?

11 January 2011, 09:24 PM	#67
johnbeth "TRF" Member Join Date: Jul 2010 Real Name: John Location: Australia Watch: Depends on mood. Posts: 9,536	Can someone or does someone have a picture showing a mod of a SS Daytona with a Meteorite dial from a WG version???

12 January 2011, 12:06 PM	#77
chrisshank Member Join Date: Aug 2010 Real Name: Chris Location: Houston, TX Watch: GMTIIc Posts: 183	Awesome pics! I'd really love to see a GMTIIc with brushed center links...

12 January 2011, 12:18 PM	#78
kyle L "TRF" Member Join Date: Feb 2009 Location: USA Watch: Rolex Explorer I Posts: 10,278	This looks cool:

12 January 2011, 10:12 PM	#85
JIFF1975 Member Join Date: Jun 2010 Location: The Hague Watch: SDDS, 116610LV Posts: 384	Some of you guys asked me (via PM) if the datewheel was on OEM part. Yes it is... Here is a picture from the back of the part. In the chip Rolex uses you can even see the crown. Here is another picture from the blue insert, same packing All OEM parts...

13 January 2011, 01:09 AM	#87
RobY330i "TRF" Member Join Date: Jul 2008 Real Name: Robert Location: Ottawa Watch: SS GMT IIc "V" Posts: 97	What an entertaining post!

13 January 2011, 07:07 AM	#89
dannyboy123 "TRF" Member Join Date: Oct 2010 Location: LonZealand Posts: 830	I have a 12 yr old sub. Is it possible for me to get/fit a green bezel insert. My local AD said it couldn't be done. By the way I'm not talking about the newer ceremaic insert, but the older/first gen insert.

Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)