The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX


Go Back   Rolex Forums - Rolex Forum > General Topics > Open Discussion Forum

Closed Thread
 
Thread Tools Display Modes
Old 2 May 2011, 10:57 PM   #1
watchf
"TRF" Member
 
Join Date: Feb 2011
Location: Australia
Posts: 2,458
Icon5 Cape Cod polishing cloth, did I use it right?

I am aware that cape cod works by removing a micro nano surface of metal/gold in order to remove any scratches but is there a trick to using cape cod polishing cloth?

I tried it on the PCL of a TT although it sort of removed some scratches but it seems to leave behind micro patch of scratches that can be somewhat visible under certain lighting showing a faint white area where the cloth was used.

Is this normal or did I not polish the surface long enough? How long do you normally polish an area for? I did it by moving the coth up and down in both direction, is this the right way?

Also the buffing cloth included in the tin of Cape Cod should not be used to buff the polishing residue away? It has a rough texture.
watchf is offline  
Old 2 May 2011, 11:02 PM   #2
dooder202
Banned
 
Join Date: Sep 2010
Real Name: Eric
Location: US
Watch: DateJust
Posts: 1,468
Quote:
Originally Posted by watchf View Post
I am aware that cape cod works by removing a micro nano surface of metal/gold in order to remove any scratches but is there a trick to using cape cod polishing cloth?

I tried it on the PCL of a TT although it sort of removed some scratches but it seems to leave behind micro patch of scratches that can be somewhat visible under certain lighting showing a faint white area where the cloth was used.
Is this normal or did I not polish the surface long enough? How long do you normally polish an area for? I did it by moving the coth up and down in both direction, is this the right way?

Also the buffing cloth included in the tin of Cape Cod should not be used to buff the polishing residue away? It has a rough texture.
That's exactly what happened to a turn-o-graph in Rose Gold when I used it on the polished center links. I wasn't sure if I had used it too little or too much or should have used a different part of the cloth more often (because the metal comes onto the cloth very easily in black, possibly that's what does these patches of micro-scratches)
dooder202 is offline  
Old 2 May 2011, 11:09 PM   #3
watchf
"TRF" Member
 
Join Date: Feb 2011
Location: Australia
Posts: 2,458
Quote:
Originally Posted by dooder202 View Post
That's exactly what happened to a turn-o-graph in Rose Gold when I used it on the polished center links. I wasn't sure if I had used it too little or too much or should have used a different part of the cloth more often (because the metal comes onto the cloth very easily in black, possibly that's what does these patches of micro-scratches)
Yeah I noticed it produced black residue quite quickly, what is the black residue anyway. Are you suppose to turn to a new surface once it turns black.

The instructions on the tin say to buff the residue with the supplied buffing cloth before the polishing agent dries but I tested a tiny area with the buffing cloth and its like sandpaper.

What did you end up doing? Just left it as it is?
watchf is offline  
Old 3 May 2011, 01:21 AM   #4
SPARTAN2161
Banned
 
Join Date: Feb 2010
Real Name: Nick H.
Location: Amherst, NY
Watch: me flip
Posts: 1,901
Sounds like you didn't polish long enough. When ever i do mine i rub from scratch to micro scratches (what you see now. hazy looking) from the cloth then a little longer till it creates a shine. Theres pretty much 3 stages and you at stage 2. The process should atleast take 5 minutes on a minor scratch. It take a bit to get that shine back but they do work well. So dont worry and good luck!
SPARTAN2161 is offline  
Old 3 May 2011, 01:33 AM   #5
watchf
"TRF" Member
 
Join Date: Feb 2011
Location: Australia
Posts: 2,458
Quote:
Originally Posted by SPARTAN2161 View Post
Sounds like you didn't polish long enough. When ever i do mine i rub from scratch to micro scratches (what you see now. hazy looking) from the cloth then a little longer till it creates a shine. Theres pretty much 3 stages and you at stage 2. The process should atleast take 5 minutes on a minor scratch. It take a bit to get that shine back but they do work well. So dont worry and good luck!
Thanks. Do you cover the brushed part of the link with masking tape when you polish? How do I know I am at stage 3, do you wipe the residue off, review and polish again if its still hazing?
watchf is offline  
Old 3 May 2011, 01:42 AM   #6
Numismatist
"TRF" Member
 
Numismatist's Avatar
 
Join Date: Nov 2007
Real Name: Chris
Location: Camden ME & STT
Watch: 116600
Posts: 6,350
YES! Cover the brushed...

Keep polishing your areas a little longer, it should go to a nice mirrored polish.

I like to use different parts of the pink cloth as it does start to 'tarnish' the cloth - I don't really know what that is or why, but I just move on to a different part of the cloth.

I've done it to numerous different polished surfaces, with a little time, each has been restored to its former glory.

Of course, yes, you care removing a layer, so I wouldn't do it to the same piece often.

Chris - Numismatist
__________________
Rolex 116600 Sea-dweller
Montblanc Solitaire Doué Black & White Legrand FP
Montblanc Solitaire Doué Black & White RB
Montblanc Meisterstück Diamond Mozart BP
Montblanc Meisterstück Mozart BP
Numismatist is offline  
Old 3 May 2011, 01:51 AM   #7
rad87gn
"TRF" Member
 
rad87gn's Avatar
 
Join Date: Jan 2009
Real Name: Chad
Location: Des Moines, Iowa
Watch: Rolex, PAM, Omega
Posts: 1,607
The pink cloth is only to apply the polish. You don't actually polish with it. That's what the buffing cloth is for.

But, ultimately. No reason to polish at all. That's what service time is for. And I personally wouldn't have it polished at each service.
__________________
Rolex P-Series SS GMT II Black, Rolex Y-Series Sea-Dweller, Rolex F-Series TT Blue Sub, Rolex F-Series Sub LV, Rolex D-Series Ladies SS/WG DJ for wife, Panerai K-Series PAM 112, Omega Speedmaster Pro 3570.50, Omega Seamaster 300M Chrono 2594.52
rad87gn is offline  
Old 3 May 2011, 01:54 AM   #8
watchf
"TRF" Member
 
Join Date: Feb 2011
Location: Australia
Posts: 2,458
Quote:
Originally Posted by Numismatist View Post
I like to use different parts of the pink cloth as it does start to 'tarnish' the cloth - I don't really know what that is or why, but I just move on to a different part of the cloth.


Chris - Numismatist
Quote:
Originally Posted by rad87gn View Post
The pink cloth is only to apply the polish. You don't actually polish with it. That's what the buffing cloth is for.
I'm confused. So you wet the link surface with the pink cloth and then buff with the white cloth provided in the tin?! You don't actually use the pink cloth to polish?! The white buffing cloth has a very rough texture though.
watchf is offline  
Old 3 May 2011, 02:32 AM   #9
petesjag
"TRF" Member
 
petesjag's Avatar
 
Join Date: Nov 2009
Location: netherlands
Posts: 2,177
use the pink cloth to apply the polish, use it also to dispurse the polish..a bit of rubbing is fine...once it starts to turn black then move to another section. then use a microfibre cloth to do the polishing..think of it as you would your car..

first clean it with Varaet or soap and water.
then dry it..varaet has a great cloth for this
then apply the cape cod polish with the pink cloth.
use a microfibre to polish it out
use a finer microfibre to do the fine buffing.
the fine silk cloths from varaet are the best for the last part...removing any polish dust or prints from your fingers.....
good luck!



Invest in a quality polishing cloth or two...microfibre cloths can be found everywhere these days..I have a whole collection of them...Varaet makes some wonderful cloth products too...google and you will find them....
petesjag is offline  
Old 3 May 2011, 03:12 AM   #10
Watchvirgin
Banned
 
Join Date: Dec 2010
Real Name: Ash_Flash
Location: Washington, DC
Watch: AP
Posts: 901
http://www.veraet.com/collections/watch-care
Watchvirgin is offline  
Old 3 May 2011, 03:16 AM   #11
Numismatist
"TRF" Member
 
Numismatist's Avatar
 
Join Date: Nov 2007
Real Name: Chris
Location: Camden ME & STT
Watch: 116600
Posts: 6,350
Quote:
Originally Posted by watchf View Post
I'm confused. So you wet the link surface with the pink cloth and then buff with the white cloth provided in the tin?! You don't actually use the pink cloth to polish?! The white buffing cloth has a very rough texture though.
Yes to both, I use the pink to polish very small areas, a big job and perhaps use a microfibre. I've always used just the pink and never had a problem and always comes out looking like brand new. I've never used it on a deep scratch.
__________________
Rolex 116600 Sea-dweller
Montblanc Solitaire Doué Black & White Legrand FP
Montblanc Solitaire Doué Black & White RB
Montblanc Meisterstück Diamond Mozart BP
Montblanc Meisterstück Mozart BP
Numismatist is offline  
Old 3 May 2011, 03:22 AM   #12
PeterT
"TRF" Member
 
PeterT's Avatar
 
Join Date: Dec 2007
Location: England
Watch: 16613 16710 16600
Posts: 1,021
I use a different technique to avoid the micro scratches from the cape cod cloth.
I wrap a micro fibre lens cleaning cloth round the end of a cotton ear bud. I dip this combination in the cap cod "juice" and then work carefully, swapping to a new piece of cloth regularly. I then polish gently with another new or just washed lens cloth.
Peter
PeterT is offline  
Old 3 May 2011, 03:35 AM   #13
Numismatist
"TRF" Member
 
Numismatist's Avatar
 
Join Date: Nov 2007
Real Name: Chris
Location: Camden ME & STT
Watch: 116600
Posts: 6,350
Here's some pix of just using the pink cloth:

http://www.rolexforums.com/showthread.php?t=99142
__________________
Rolex 116600 Sea-dweller
Montblanc Solitaire Doué Black & White Legrand FP
Montblanc Solitaire Doué Black & White RB
Montblanc Meisterstück Diamond Mozart BP
Montblanc Meisterstück Mozart BP
Numismatist is offline  
Old 3 May 2011, 03:42 AM   #14
jnkay
"TRF" Member
 
jnkay's Avatar
 
Join Date: Dec 2008
Location: South Florida, US
Watch: du jour
Posts: 1,815
The key here is to do the buffing with a good microfiber cloth. You can rub away for a minute or two with the pink cloth to actually remove the scratches and scuffs, and then with lighter pressure, use the microfiber cloth to gradually wipe off the cape cod. The process of wiping off all the residue ("juice" or "haze") will remove the fine scratches the pink cloth left behind. I don't even bother with the cheese cloth they provide.
jnkay is offline  
Old 3 May 2011, 05:27 AM   #15
outtatime
"TRF" Member
 
Join Date: Jan 2010
Real Name: Jon
Location: Toledo, OH
Watch: Deepsea
Posts: 1,136
I've tried Cape Cod cloths and found them to be virtually useless. I have a Breitling with a highly-polished finish and even after rubbing and rubbing with the pink cloth and then "buffing" with a microfiber, it really hadn't done a thing to the scratches. I gave up as it wasn't worth the effort and just made my fingers black and slimy.
outtatime is offline  
Old 3 May 2011, 05:46 AM   #16
jnkay
"TRF" Member
 
jnkay's Avatar
 
Join Date: Dec 2008
Location: South Florida, US
Watch: du jour
Posts: 1,815
Quote:
Originally Posted by outtatime View Post
I've tried Cape Cod cloths and found them to be virtually useless. I have a Breitling with a highly-polished finish and even after rubbing and rubbing with the pink cloth and then "buffing" with a microfiber, it really hadn't done a thing to the scratches. I gave up as it wasn't worth the effort and just made my fingers black and slimy.
Stainless steel is hard and takes some time and elbow grease. For anything other than superficial hairline scratches, I would use a dremel with cotton polishing wheel, then finish with cape cod. On gold however, scratches come off pretty easily with just cape cod.
jnkay is offline  
Old 3 May 2011, 02:06 PM   #17
watchf
"TRF" Member
 
Join Date: Feb 2011
Location: Australia
Posts: 2,458
Thanks, I will give it another go to get rid of the haze/micro scratches.
watchf is offline  
Old 3 May 2011, 02:42 PM   #18
bkandj2000
Member
 
Join Date: Oct 2009
Real Name: B A
Location: Oklahoma
Watch: None specifically
Posts: 651
I've used the Cape Cod cloth successfully, even on a high-polished Breitling (100% removal success). Proper technique and patience, my friend! It may or may not remove the blemish 100% on your watch, but it will be very less noticeable.

This process (learned by trial & error) has worked for me:


Warm water rinse watch (only if watch is properly sealed).

Dispense mild liquid dish detergent on clean fingers- gently rub watch.

Warm water rinse watch again gently rubbing watch with fingers to remove all detergent. (only if watch is properly sealed).

Blot dry watch with microfiber cloth.

Lay watch on microfiber cloth to air dry.

Rub clean, moist Cape Cod polishing cloth with firm, precise pressure on blemish being careful to brace watch properly so the pressure disperses on the blemished area only and doesn't cause the watch to move around nor come in contact with unintended areas of the watch.

Warm water rinse watch again (only if watch is properly sealed).

Dispense mild liquid dish detergent on clean fingers - gently rub watch.

Warm water rinse watch again gently rubbing watch to remove all detergent (only if watch is properly sealed).

Blot dry watch with microfiber cloth.

Lay watch on microfiber cloth to air dry.

Use clean polishing cloth on all of watch for final finish. To avoid possible further scratching, use only the inner portion of the polishing cloth. Do not allow the sewn edges of the polishing cloth to contact the high-polished finish of watch.


Repeat process until you are satisfied or it appears the blemish no longer shows signs of improvement.




Blaine
bkandj2000 is offline  
Old 4 May 2011, 12:55 AM   #19
watchf
"TRF" Member
 
Join Date: Feb 2011
Location: Australia
Posts: 2,458
I just finished trying it again and this time I polished longer than before like you guys advised and the result is fantastic! I polished it with the pink cape cod cloth before wiping the residue off and using a lint free disposable cloth to remove left over residue and buff it out
watchf is offline  
Old 4 May 2011, 01:53 AM   #20
klayface
Member
 
Join Date: Oct 2008
Real Name: Chuck Norris
Location: So. California
Watch: SS Daytona w/ dial
Posts: 346
I hate to say this but it sounds like you permanantly added some swirls to the polished parts of your watch. The trick I think is to wash the watch thoroughly to remove and micro dirt and dust that may scratch the finish when its being polished and me thinks you didn't do that.
klayface is offline  
Old 20 December 2015, 01:22 AM   #21
Sam Taha
"TRF" Member
 
Join Date: Jul 2008
Location: Abu Dhabi
Watch: Rolex Submariner
Posts: 96
Just came across this old thread, and wanted to add my experience. I just used cape cod on the polished clasp of the GMT Master II and on the sides of the watch (around the crown and on the other side). Before that, I experimented on another older/cheaper watche like my wife's Bulgari which is so scratched the watch is unrecognizable. Bottom line is that it works! At least for hairline surface scratches (which is 95% of scratches on any watch). And the procedure is straight forward. Use the moist pink cloth with a q-tip behind it, apply medium pressure, not too hard, not too soft, and polish back and forth quickly in straight lines, from anywhere between 30 seconds to 2-3 minutes depending on how scratched it is. I'd use the same pressure as if I were buffing it, i.e. not too hard! Probably at 30 seconds you'll shine it but not really get rid of scratches.. for visible scratches you'll need at least 2-3 minutes, maybe more. I even noticed results with just using the q-tip (which itself becomes soaked). Then I'd buff it with a clean microfiber cloth or, in my case, a clean soft cotton sock :) Buff for at least 30 seconds to a minute.. that should be enough. Then move on to the next small section repeating above steps. Once you're done polishing and buffing, head over to the sink, get some warm water and detergent and gently wash it, then dry it / buff it with a nice clean soft towel.

And for the brushed parts, I used a dry 3M scouring pad (or similar). Rub LIGHTLY (very little pressure) in straight lines again. Then wash it if you want. That's it!
Sam Taha is offline  
Old 20 December 2015, 04:06 AM   #22
wantonebad
2024 SubLV41 Pledge Member
 
wantonebad's Avatar
 
Join Date: Nov 2007
Location: USA
Watch: 126600, 116500LN
Posts: 12,849
5 year old threads should stay 5 years deep in the archives, start your own thread.
__________________
"I'm kind of a big deal...
on a fairly irrelevant social media site
that falsely inflates my fragile ego"
wantonebad is offline  
Closed Thread


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

OCWatches

Wrist Aficionado

My Watch LLC

WatchesOff5th

DavidSW Watches

Takuya Watches


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.