The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX


Go Back   Rolex Forums - Rolex Forum > Other (non-Rolex) Watch Topics > Panerai Discussion Forum

Reply
 
Thread Tools Display Modes
Old 8 December 2016, 10:24 AM   #1
Farley Grudge
"TRF" Member
 
Join Date: Sep 2015
Real Name: Dave
Location: OKC USA
Watch: 16710
Posts: 103
Looking to get into Paneri...

I've been reading up on Paneri and looking through this forum lately. I like the cases with crown guards the best. I also like the dials where the numbers are "cut out" and the lume is underneath. Movement isn't a huge deal to me. What series would be the best for me to start looking at? Any help would be appreciated!
Farley Grudge is offline   Reply With Quote
Old 8 December 2016, 10:44 AM   #2
mg18
"TRF" Member
 
mg18's Avatar
 
Join Date: Jun 2015
Location: Toronto
Watch: 126710BLRO
Posts: 696
Ok, so essentially you will want some form of luminor. Also, the "cut out" numbers and indices you mentioned is a sandwich dial in the panerai world, whereas a sausage dial means the numbers and indices are painted on.

If you are willing to go pre-owned, I would suggest that the pam 111 or 112 (i'm pretty sure they are very recently out of production) will be exactly what you are looking for. I started with a pam 111 myself and with all the strap options, I find that it steals a lot of wrist time from my subC. Honestly, the 111 scratched the panerai itch for me and I don't think I would ever want another one because i'm so happy with it.

If you want one of the more recent models, I would recommend the pam 510 which is basically a 111, except with the newer in house movement and different shaped numbers on the dial. Also the pam 560 is more or less a pam 112 with the updated in house movement and 8 days slapped on the dial.

Also, if you go 111 or 112, make sure it's recent enough to have the sandwich dial, because they used to make them with the sausage dial 10 years or so ago.

Let me know if I can help!
mg18 is offline   Reply With Quote
Old 8 December 2016, 11:17 AM   #3
Lordofrolex
"TRF" Member
 
Lordofrolex's Avatar
 
Join Date: Sep 2015
Real Name: Brandon
Location: Los Angeles, CA
Watch: Yes Please!
Posts: 6,691
The best way to pick as there so many and only have slight difference between all of them is go to a PAM boutique. Ask them about all the different case and dials. They'll explain it all to you. Then ask for a catalog and flip through it and one will scream to you. My first high end watch was a PAM. I went to a boutique and got a catalog. Flipped through it and once i saw the PAM 359 i knew that was the one.
__________________
Rolex GMT Master II 116710LN
Panerai PAM 359
Audemars Piguet RO 15300OR


Follow me on Instagram: @b_jakobovich
Lordofrolex is offline   Reply With Quote
Old 8 December 2016, 01:00 PM   #4
fullcourt
"TRF" Member
 
fullcourt's Avatar
 
Join Date: Oct 2010
Real Name: dp
Location: chicago, usa
Watch: panerai
Posts: 2,369
it's spelt, PANERAI, just FYI ��

first thing is to go try on a few, at an ad or a boutique.

the luminor with the sandwich dial is classic. i own 5 panerai's if you have any questions feel free to send me a pm.

good luck with your quest.
__________________
dp
just living the dream
chicago, usa

chgo_risti on IG
fullcourt is offline   Reply With Quote
Old 8 December 2016, 01:15 PM   #5
Goin2drt
Banned
 
Join Date: Aug 2014
Location: Kentucky
Posts: 2,307
312
Goin2drt is offline   Reply With Quote
Old 8 December 2016, 01:33 PM   #6
RoleyPolly
"TRF" Member
 
RoleyPolly's Avatar
 
Join Date: Oct 2016
Location: Wisconsin
Watch: BLNR & 79220N
Posts: 130
318!
RoleyPolly is offline   Reply With Quote
Old 8 December 2016, 01:36 PM   #7
Farley Grudge
"TRF" Member
 
Join Date: Sep 2015
Real Name: Dave
Location: OKC USA
Watch: 16710
Posts: 103
Thanks all! As far as the spelling...I had to change autocorrect about 5 times to get it close :) I thought that it was a sandwich dial, I thought I wanted a Luminor just am not up on the nomenclature yet. I have been searching for an AD near me (OKC) but didn't see any on their website. I'll keep looking and if I have other questions PM's will be sent!
Farley Grudge is offline   Reply With Quote
Old 8 December 2016, 02:38 PM   #8
Cru Jones
2024 SubLV41 Pledge Member
 
Cru Jones's Avatar
 
Join Date: Mar 2010
Location: Paris, France
Posts: 35,300
There's a lot to learn, but well worth it. When you find the right one for you, you're going to love it!
Cru Jones is offline   Reply With Quote
Old 9 December 2016, 03:42 AM   #9
Rain49king
"TRF" Member
 
Join Date: Jun 2015
Location: Florida
Posts: 79
My vote 422 (if you have the wrist for it) makes for a nice one and done. I love the dirty dial and the watch looks amazing with almost any strap.
Rain49king is offline   Reply With Quote
Old 9 December 2016, 03:48 AM   #10
ocwatching
"TRF" Member
 
ocwatching's Avatar
 
Join Date: Jan 2009
Real Name: Phil
Location: CA
Posts: 5,374
good advice below for your first if you are looking to pickup a 44MM

otherwise..372 or 422 in the 47mm world would be all the panerai you need..

feel free to reach out to me...

Quote:
Originally Posted by mg18 View Post
Ok, so essentially you will want some form of luminor. Also, the "cut out" numbers and indices you mentioned is a sandwich dial in the panerai world, whereas a sausage dial means the numbers and indices are painted on.

If you are willing to go pre-owned, I would suggest that the pam 111 or 112 (i'm pretty sure they are very recently out of production) will be exactly what you are looking for. I started with a pam 111 myself and with all the strap options, I find that it steals a lot of wrist time from my subC. Honestly, the 111 scratched the panerai itch for me and I don't think I would ever want another one because i'm so happy with it.

If you want one of the more recent models, I would recommend the pam 510 which is basically a 111, except with the newer in house movement and different shaped numbers on the dial. Also the pam 560 is more or less a pam 112 with the updated in house movement and 8 days slapped on the dial.

Also, if you go 111 or 112, make sure it's recent enough to have the sandwich dial, because they used to make them with the sausage dial 10 years or so ago.

Let me know if I can help!
__________________
too much into watches...
ocwatching is offline   Reply With Quote
Old 9 December 2016, 04:27 AM   #11
supra8903
"TRF" Member
 
Join Date: Jul 2013
Real Name: Joe
Location: NY
Watch: Rolex Sub 114060
Posts: 277
just a FYI the 510 and 560 are no longer sandwich dials, so you have to go used or step up to a 1950 case.
supra8903 is offline   Reply With Quote
Old 9 December 2016, 07:04 AM   #12
stockae92
2024 Pledge Member
 
stockae92's Avatar
 
Join Date: Oct 2009
Location: Socal
Posts: 4,964
111 or 112 since in-house movement doesn't matter to you :)
__________________
135
├┼┼╕
246 R
stockae92 is offline   Reply With Quote
Old 9 December 2016, 11:29 AM   #13
mg18
"TRF" Member
 
mg18's Avatar
 
Join Date: Jun 2015
Location: Toronto
Watch: 126710BLRO
Posts: 696
Quote:
Originally Posted by supra8903 View Post
just a FYI the 510 and 560 are no longer sandwich dials, so you have to go used or step up to a 1950 case.
Interesting, I didn't know that. I need to keep up with panerai, always doing something lol. Are the 1950 models going to be the only ones that have sandwich dials now?
mg18 is offline   Reply With Quote
Old 9 December 2016, 12:32 PM   #14
Urosfan
"TRF" Member
 
Urosfan's Avatar
 
Join Date: Oct 2012
Location: NYC
Watch: Me now
Posts: 19,372
111,112 for sure
Urosfan is offline   Reply With Quote
Old 9 December 2016, 01:06 PM   #15
Baco Noir
"TRF" Member
 
Baco Noir's Avatar
 
Join Date: Dec 2007
Real Name: Roger
Location: Colorado
Watch: this ya'll
Posts: 4,971
372, 422, 557 - all are 47mm
__________________
Current Collection: Rolex 126619LB, 116710BLNR, and 216570 polar Explorer II; Omega Apollo 8 Speedmaster and Planet Ocean 42; Tudor BB Bronze Bucherer Blue Edition; Nomos Neomatik 42; Breitling Aerospace, Avenger Blackbird, & SuperOcean 44; Doxa 300 Pro Carbon; Stowa Limette; Laco Napa Flieger; Mickey Mouse Timex Electric; and dare I say it...an Apple Watch too
Baco Noir is offline   Reply With Quote
Old 10 December 2016, 12:16 AM   #16
Speed
"TRF" Member
 
Speed's Avatar
 
Join Date: Aug 2009
Location: USA
Posts: 19,706
Quote:
Originally Posted by Farley Grudge View Post
I've been reading up on Paneri and looking through this forum lately. I like the cases with crown guards the best. I also like the dials where the numbers are "cut out" and the lume is underneath. Movement isn't a huge deal to me. What series would be the best for me to start looking at? Any help would be appreciated!


I'd make a case for the 312. I had a 111 previously. Both are sandwich dials.

The 312 has the push button strap change system. This is a god send. If you plan on getting a variety of straps - which makes wearing a Pam a lot of fun - this is a must have feature IMO.

That said, if you are fine with the occasional strap change - or don't mind taping up you lugs and possibly cross threading your screw holes - no worries!
Speed is offline   Reply With Quote
Old 10 December 2016, 12:19 AM   #17
WWC
"TRF" Member
 
WWC's Avatar
 
Join Date: Sep 2010
Location: Home
Posts: 1,438
Totally agree with the 111,112! It's pretty much all you need.

What I wanted were the following: sandwich dial, clear case back, base model, ETA movement... the 112 ticked all the boxes. I'm glad I purchased the last production (R series) as it is recently discontinued.

Panerai are known for their design and not so much for their movements, therefore it was important that I picked up the ETA. Also they are easily serviced by an independent.

Hope this helps and best of luck picking out your next Pam!


Sent from my iPad using Tapatalk
__________________
Royal Oak 15500ST
Master Calendar METEORITE Q1552540 | Luminor GMT PAM 00335
Aquanaut 5167A-001 | Nautilus 5712/1A-001
Cosmograph DAYTONA 116520 | DEEPSEA 126660 | Explorer 214270 | GMT Master II BLRO 16710 | GMT Master II VTNR 126720 | Submariner LV 16610 | Sky-Dweller 326139 | Prince Oysterdate 90630
WWC is offline   Reply With Quote
Old 10 December 2016, 04:57 AM   #18
jdog19
"TRF" Member
 
jdog19's Avatar
 
Join Date: Oct 2014
Posts: 134
I would second (or third?) the 111 if the seconds hand is important or the 112 if it is not.
jdog19 is offline   Reply With Quote
Old 10 December 2016, 10:52 AM   #19
ajas
"TRF" Member
 
ajas's Avatar
 
Join Date: Nov 2013
Real Name: Will
Location: Kuala Lumpur
Watch: SubC, Pam, Speede
Posts: 3,146
I would suggest look at base logo models 000 or 005. Aim for brand new models as they are still available at some ADs.

Being recently discontinued they will be very popular in years to come.
Their simple design refers to early Panerai models and it is not suprise why so.many calls them true Panerai DNA.

In case later on you will find out that Panerai is not for you they are also easiest to flip with minimal or no loss.

Take your time and pick one which sings to you the most.

All the best and have fun. Believe me, hunt is the best part of process.

By the way mine 2 says hello:





Sent from my SM-G930F using Tapatalk
ajas is offline   Reply With Quote
Old 10 December 2016, 10:55 AM   #20
Watch This
Banned
 
Join Date: Mar 2015
Location: In your head
Watch: SS YMII
Posts: 1,619
422
Watch This is offline   Reply With Quote
Old 11 December 2016, 07:42 AM   #21
Ruud Van Driver
"TRF" Member
 
Ruud Van Driver's Avatar
 
Join Date: Oct 2014
Real Name: Chopped Liver
Location: S. Wales Valleys
Watch: Mickey Mouse
Posts: 9,926
Quote:
Originally Posted by Speed View Post
I'd make a case for the 312. I had a 111 previously. Both are sandwich dials.

The 312 has the push button strap change system. This is a god send. If you plan on getting a variety of straps - which makes wearing a Pam a lot of fun - this is a must have feature IMO.

That said, if you are fine with the occasional strap change - or don't mind taping up you lugs and possibly cross threading your screw holes - no worries!
Some good advice here. Consider a 359 too; it's very similar to the 312 but has ecru lume, polished case and Arabic dial.
Attached Images
 
__________________
116520 Black, 116610 LVc, 116660 D-Blue, 116610 LNc, 116622 Blue, PAM359, PAM689, PAM737

"Why should you allow an AD to shake you down, just so you can buy a watch" - Grady Philpott
Card carrying member of TRF's Global Association of Retro-Grouch-Curmudgeons
Ruud Van Driver is offline   Reply With Quote
Old 11 December 2016, 11:54 AM   #22
nick c
Banned
 
Join Date: Feb 2012
Location: Canada
Posts: 26,846
Go for the base 000
Attached Images
 
nick c is offline   Reply With Quote
Old 11 December 2016, 01:36 PM   #23
DCheeta
"TRF" Member
 
DCheeta's Avatar
 
Join Date: Jun 2013
Real Name: Dave
Location: NYC
Posts: 7,181
Since you like the sandwich dial, I'd go for the 112. It's such a clean, awesome watch.
DCheeta is offline   Reply With Quote
Old 19 January 2017, 10:22 AM   #24
Farley Grudge
"TRF" Member
 
Join Date: Sep 2015
Real Name: Dave
Location: OKC USA
Watch: 16710
Posts: 103
So in my research I've found that there has been issues with the movement in the 312...not sure if this is still an issue? Also, I live in the Oklahoma City area so the closest boutique is Dallas which is just over 3 hours away. The ETA movement would be serviceable by any watchmaker...what about the in house movements?
Farley Grudge is offline   Reply With Quote
Old 19 January 2017, 01:49 PM   #25
mg18
"TRF" Member
 
mg18's Avatar
 
Join Date: Jun 2015
Location: Toronto
Watch: 126710BLRO
Posts: 696
Quote:
Originally Posted by Farley Grudge View Post
So in my research I've found that there has been issues with the movement in the 312...not sure if this is still an issue? Also, I live in the Oklahoma City area so the closest boutique is Dallas which is just over 3 hours away. The ETA movement would be serviceable by any watchmaker...what about the in house movements?

In house movements should probably only be serviced by richemont unfortunately.
mg18 is offline   Reply With Quote
Old 20 January 2017, 04:46 AM   #26
jhcam8
"TRF" Member
 
jhcam8's Avatar
 
Join Date: May 2011
Real Name: Jim
Location: SE MI, USA
Watch: Sub C
Posts: 2,068
Enjoy your journey - it's a wonderful world!
jhcam8 is offline   Reply With Quote
Old 20 January 2017, 05:12 AM   #27
fania123
"TRF" Member
 
fania123's Avatar
 
Join Date: Sep 2008
Location: PHILA
Posts: 1,726
I had been collecting them since 06, do yourself a favor get a zero and never look back. It's the only Panerai in my collection and the only one I'll ever need.
Attached Images
 
fania123 is offline   Reply With Quote
Old 20 January 2017, 05:33 AM   #28
Punchthefatkid
"TRF" Member
 
Punchthefatkid's Avatar
 
Join Date: Dec 2016
Location: Sheffield England
Posts: 458
The 372 is generally regarded as the ultimate Panerai... it has all the DNA from military Panerai's of yester year, a nice easy to read uncluttered face and the sandwich dial you mentioned you liked.

Just a word of warning though...it has the 1950 style 47mm Luminor case and is a massive watch, and I mean MASSIVE!!!!

If you intend to use it as your daily wearer, make sure you are comfortable with the size of it.

I found to my cost/disappointment that it is physically too large to wear with a business shirt - very frustrating when you spend all that money and then can't enjoy it every day like you would like to.

Regards
Punchthefatkid is offline   Reply With Quote
Old 21 January 2017, 12:57 AM   #29
Psmith
"TRF" Member
 
Psmith's Avatar
 
Join Date: Sep 2008
Real Name: Clive
Location: Exoplanet
Watch: spring-driven
Posts: 38,856
For dipping a toe into the (enjoyable) waters of Panerai, probably safest to start with something like a 111 or 005. You mentioned sandwich dials ('cut out' numbers) in your original post, so that would be models such as the 111, 112, etc. These models are popular and fairly easy to flip if you decide that the brand is not for you. They all use ETA-based movements, which will be easier to service than in-house movements.
Contrary to what you may read elsewhere, 'Base' models have two hands and 'Marina' models have three hands. There is a lot to learn with Panerai, not least of all the extensive model range. There is much fun to be had with straps and buckles, which for many is a big part of the ownership experience.
__________________
Psmith is offline   Reply With Quote
Old 12 February 2017, 05:30 AM   #30
Culley22
"TRF" Member
 
Culley22's Avatar
 
Join Date: Sep 2012
Location: Nome, AK
Watch: amacallit
Posts: 719
Are all of these models mentioned here manual power, or automatics? I too am looking to dip in and have, thanks to this thread and google, targeted the following references: 000, 111, 112, 372, 422...and maybe 312.
__________________
116333, 216570, PAM372
Culley22 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

My Watch LLC

WatchesOff5th

DavidSW Watches

Takuya Watches

OCWatches

Asset Appeal

Wrist Aficionado


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.