ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Mystro · 5 June 2017, 03:50 AM

Just a quick tip for totally eliminating any metal to metal contact between the links and clasp. This should eliminate any scratches since the easylink adjust in and out 5mm. As a byproduct it makes the bracelet when adjusting the easylink whisper quiet as no metal touches against them self. I used a "Rolex green" (or any color) thin felt sticker, cut in half and placed it on the underside of the clasp where the easylink makes contact. Cant even tell it on there. The felt stickers are usually used for the under sides of a vase to protect your table tops. Buy these in a pack of 30 for under $4.00. Just replace with a new one when needed.
This is a simple idea but seems very effective.

zimm33 · 5 June 2017, 08:57 AM

Great tip! That line / scratch that wears there is annoying!

blastpack · 5 June 2017, 09:14 AM

what is this called?

Ticknaway · 5 June 2017, 09:34 AM

Put a small crown on that sticker and you'll make a mint!

GB-man · 5 June 2017, 09:41 AM

I thought for sure I was going to find something laughable in here but I'll be damned if that's not genius

aes7.5x55 · 5 June 2017, 09:45 AM

I like it! That's a very good idea, thanks

Mystro · 5 June 2017, 10:21 AM

Quote:

Originally Posted by blastpack

what is this called?

They are generically called "furniture pads". Walmart and any Lowes or even office supply stores has them. You put them on items with hard surfaces so they don't scratch wooden desk tops and dressers.
Just get the thinner ones like these:

https://www.amazon.com/dp/B001CGTO1C...a-307142236740

FlyinM3 · 5 June 2017, 10:21 AM

Great idea!
We should get a group buy going

FlyinM3 · 5 June 2017, 10:24 AM

Quote:

Originally Posted by Mystro

They are generically called "furniture pads". Walmart and any Lowes has them. You put them on items with hard surfaces so they don't scratch wooden desk tops and dressers.
Just get the thinner ones like these:

https://www.amazon.com/dp/B001CGTO1C...a-307142236740

How thick are these?

Mystro · 5 June 2017, 10:28 AM

Quote:

Originally Posted by FlyinM3

How thick are these?

Thin, like the piece of cardboard on the back of a yellow legal pad. Adheisive on one side, felt on the other. I think you can even find them at the dollar store.

You can even use this idea on the older clasp where you can micro adjust in the clasp.
Hmmm

I might be able to make some serious coin on this idea.

AJMarcus · 5 June 2017, 10:31 AM

They sweat proof?

FlyinM3 · 5 June 2017, 10:33 AM

Quote:

Originally Posted by Mystro

Thin, like the piece of cardboard on the back of a yellow legal pad. Adheisive on one side, felt on the other. I think you can even find them at the dollar store.

Ok thanks i think i will give it a try

GT500 · 5 June 2017, 10:34 AM

I use 3m venture shield. Same thing as clear bra for your vehicle. Check it out sometime

Mystro · 5 June 2017, 10:40 AM

Quote:

Originally Posted by AJMarcus

They sweat proof?

Enough, considering where it is positioned at and not on your skin. The clasp even pinches them in place so I can't see them ever coming loose from activity. They are less than a penny a piece so I figured I would just slap on another one if they start to look bad or peel. I have washed my watch a few times with them on and they stay put. The beauty of the felt is it actually quiets the metal on metal contact.

ejvette · 5 June 2017, 10:46 AM

Its the simplest things that work the best.... thank you

blastpack · 5 June 2017, 12:56 PM

Thanks, I put it on my glide lock. I won't be able to fully adjust the clasp, but it will save me some scratches.

Quote:

Originally Posted by Mystro

They are generically called "furniture pads". Walmart and any Lowes or even office supply stores has them. You put them on items with hard surfaces so they don't scratch wooden desk tops and dressers.
Just get the thinner ones like these:

https://www.amazon.com/dp/B001CGTO1C...a-307142236740

Tudorpa · 5 June 2017, 02:42 PM

Left my new watch with Rolex dealer to buff out a ding and it came back with the tell tale clasp burn. I took it out with a q-tip with a piece of cape cod cloth wrapped around it. Will try the pad asap. Thanks!

lord91 · 5 June 2017, 03:30 PM

That's a good tip, however i don't find myself bothered about that kind of wear on the link, is normal due to how they lay over one on the other. Even the clasp when folded leaves some marks, it's normal wear

joli160 · 5 June 2017, 07:13 PM

I think that is completely over the top, really I don't care about the marks at all

Bob the brush · 6 June 2017, 07:20 PM

I just love simple, cheap, easy solutions. Great,thanks, I haven't got a bracelet with the easylink, but my next purchase will have, so I am going to be prepared and get some in. Thanks.

DJRikki · 6 June 2017, 08:13 PM

Love it ... here's my tip too

Small piece of Sellotape applied to the bottom part of the PCL clasp stops desk diving scratches and dings.

marcellomatt5 · 6 June 2017, 08:20 PM

Amazing tip!
Thanks

Enviado do meu iPhone usando Tapatalk

Lol-x · 6 June 2017, 08:30 PM

Great tip, well worth the few dollars.

Mystro · 6 June 2017, 09:33 PM

Here is a pic of what I use. If you can't find them, PM me and maybe I can work out a way for you to get some.

BiH115 · 6 June 2017, 10:17 PM

Waterproof? What if I want to do a full olympic dive into the Mediterranean with my GMT on, will it survive?

Seriously though, I'm getting some asap. Love the clear tape idea as well.

Devildog · 6 June 2017, 11:29 PM

Quote:

Originally Posted by DJRikki

Love it ... here's my tip too

Small piece of Sellotape applied to the bottom part of the PCL clasp stops desk diving scratches and dings.

This but with 3M. And on the link each side tf the clasp that get clasp wear marks. 3M is practically invisible, waterproof and non discolouring

ap1 · 6 June 2017, 11:34 PM

Crafty, DIY job.

A little surprised no1 threw up the picture of their watch wrapped in bubble tape yet though

SemperFi · 7 June 2017, 04:29 AM

Very clever idea.

Chiboy · 7 June 2017, 05:02 AM

Quote:

Originally Posted by ap1

Crafty, DIY job.

A little surprised no1 threw up the picture of their watch wrapped in bubble tape yet though

You know it's coming....

FlyinM3 · 7 June 2017, 05:16 AM

Quote:

Originally Posted by Mystro

Here is a pic of what I use. If you can't find them, PM me and maybe I can work out a way for you to get some.

PM Sent

5 June 2017, 03:50 AM	#1
Mystro 2024 SubLV41 Pledge Member Join Date: Dec 2009 Real Name: The Mystro ;) Location: Central Pa. Posts: 15,511	Tip: Easylink scratch protection. Just a quick tip for totally eliminating any metal to metal contact between the links and clasp. This should eliminate any scratches since the easylink adjust in and out 5mm. As a byproduct it makes the bracelet when adjusting the easylink whisper quiet as no metal touches against them self. I used a "Rolex green" (or any color) thin felt sticker, cut in half and placed it on the underside of the clasp where the easylink makes contact. Cant even tell it on there. The felt stickers are usually used for the under sides of a vase to protect your table tops. Buy these in a pack of 30 for under $4.00. Just replace with a new one when needed. This is a simple idea but seems very effective. __________________

5 June 2017, 10:46 AM	#15
ejvette 2024 SubLV41 Pledge Member Join Date: Apr 2014 Real Name: Ed Location: East Hampton NY Watch: me break clays.. Posts: 7,516	Its the simplest things that work the best.... thank you __________________ Rolex•Omega•Breitling•Grand Seiko•Tudor "No one on their death bed ever said I wish I worked more" My Grandma * Card carrying member of TRF's Global Association of Retro-Grouch-Curmudgeons *

5 June 2017, 02:42 PM	#17
Tudorpa "TRF" Member Join Date: May 2016 Location: Alpharetta,Ga Watch: Rolex GMT; Panerai Posts: 46	Great idea Left my new watch with Rolex dealer to buff out a ding and it came back with the tell tale clasp burn. I took it out with a q-tip with a piece of cape cod cloth wrapped around it. Will try the pad asap. Thanks!

5 June 2017, 07:13 PM	#19
joli160 2024 SubLV41 Pledge Member Join Date: Apr 2013 Location: NL Watch: Yachtmaster Posts: 14,759	I think that is completely over the top, really I don't care about the marks at all __________________ Day Date 18238, Yachtmaster 16622, Deepsea 116660, Submariner 116619, SkyD 326935, DJ 178271, DJ 69158, Yachtmaster 169622, GMT 116713LN, GMT 126711.

6 June 2017, 08:13 PM	#21
DJRikki "TRF" Member Join Date: Jan 2017 Real Name: Ricardo Location: Scotland Watch: Rolex BLNR Posts: 851	Love it ... here's my tip too Small piece of Sellotape applied to the bottom part of the PCL clasp stops desk diving scratches and dings. __________________ Watch Enthusiast

5 June 2017, 08:57 AM	#2
zimm33 "TRF" Member Join Date: May 2016 Location: Uniontown, Ohio Posts: 18	Great tip! That line / scratch that wears there is annoying!

5 June 2017, 09:14 AM	#3
blastpack "TRF" Member Join Date: Jul 2010 Location: Canada Posts: 10	what is this called?

5 June 2017, 09:34 AM	#4
Ticknaway "TRF" Member Join Date: Aug 2015 Real Name: Dave Location: USA Watch: Rolex Posts: 1,028	Put a small crown on that sticker and you'll make a mint!

5 June 2017, 09:41 AM	#5
GB-man 2024 SubLV41 Pledge Member Join Date: Nov 2012 Location: USA Watch: addiction issues Posts: 37,355	I thought for sure I was going to find something laughable in here but I'll be damned if that's not genius

5 June 2017, 09:45 AM	#6
aes7.5x55 "TRF" Member Join Date: Jul 2015 Real Name: Adam Location: Ohio Watch: ing the river flow Posts: 359	I like it! That's a very good idea, thanks

5 June 2017, 10:21 AM	#8
FlyinM3 "TRF" Member Join Date: Oct 2013 Real Name: Dan Location: NYC Posts: 807	Great idea! We should get a group buy going

5 June 2017, 10:31 AM	#11
AJMarcus "TRF" Member Join Date: Nov 2010 Real Name: AJ Location: USA Watch: Swiss Posts: 5,238	They sweat proof?

5 June 2017, 10:34 AM	#13
GT500 "TRF" Member Join Date: Apr 2017 Real Name: John Location: OH IO Posts: 539	I use 3m venture shield. Same thing as clear bra for your vehicle. Check it out sometime

5 June 2017, 03:30 PM	#18
lord91 "TRF" Member Join Date: Apr 2016 Location: Bucuresti Watch: a Rolex duo Posts: 1,989	That's a good tip, however i don't find myself bothered about that kind of wear on the link, is normal due to how they lay over one on the other. Even the clasp when folded leaves some marks, it's normal wear

6 June 2017, 07:20 PM	#20
Bob the brush "TRF" Member Join Date: Feb 2017 Location: Mercia Watch: 1016 Explorer. Posts: 928	I just love simple, cheap, easy solutions. Great,thanks, I haven't got a bracelet with the easylink, but my next purchase will have, so I am going to be prepared and get some in. Thanks.

6 June 2017, 08:20 PM	#22
marcellomatt5 "TRF" Member Join Date: Dec 2016 Real Name: Marcello Location: Rio de Janeiro Watch: 16610lv / 16610LN Posts: 146	Amazing tip! Thanks Enviado do meu iPhone usando Tapatalk __________________ Rolex 116520 Black \| 116622 Platinum \| 16710 Coke \| 16610LV \| 16610LN \| 1601 Omega Speedmaster Professional JLC Reverso Grande Taille Longines Legend Diver

6 June 2017, 08:30 PM	#23
Lol-x Facilitator Join Date: Nov 2005 Real Name: Steve Location: Omnipresent Posts: 33,588	Great tip, well worth the few dollars. __________________ *Most folks are about as happy as they make up their minds to be.* ~Abraham Lincoln Nothing compares to the simple pleasure of a bike ride. ~John F. Kennedy ROLEXploitation - yeah I'm a victim

6 June 2017, 09:33 PM	#24
Mystro 2024 SubLV41 Pledge Member Join Date: Dec 2009 Real Name: The Mystro ;) Location: Central Pa. Posts: 15,511	Here is a pic of what I use. If you can't find them, PM me and maybe I can work out a way for you to get some. __________________

6 June 2017, 10:17 PM	#25
BiH115 "TRF" Member Join Date: May 2017 Location: NH Watch: your mouth! Posts: 384	Waterproof? What if I want to do a full olympic dive into the Mediterranean with my GMT on, will it survive? Seriously though, I'm getting some asap. Love the clear tape idea as well.

6 June 2017, 11:34 PM	#27
ap1 2024 SubLV41 Pledge Member Join Date: Mar 2013 Location: usa Posts: 19,537	Crafty, DIY job. A little surprised no1 threw up the picture of their watch wrapped in bubble tape yet though

7 June 2017, 04:29 AM	#28
SemperFi "TRF" Member Join Date: Sep 2014 Real Name: Angelo Location: Brooklyn, NY Watch: Rolex Submariner Posts: 42,164	Very clever idea. __________________ Rolex Submariner Omega Seamaster Aqua Terra Tudor Black Bay 58 Blue Tudor Ranger 79910 Nomos Club Datum 733 Nomos Metro 38 Stowa Flieger Classic 40 * Card carrying member of TRF's Global Association of Retro-Grouch-Curmudgeons *

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)