ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Dubshack · 13 July 2018, 02:39 AM

Looking to add some diamond earrings for my wife (she has no interest in a watch

). My wife’s ring is color F and clarity VS1.

I was shown some earrings in the F-H range but SI1 and SI2 clarity.

My initial thought is I should stick to similar color and clarity as her ring. But wondering if being on the ear where no one will look closely is different than the hand, and the clarity isn’t as big a deal.

Has anyone else gone through this process?

Sent from my iPhone using Tapatalk

Burlington · 13 July 2018, 02:42 AM

Will her hair cover her ears ?

Really it’s down to you if the extra difference is worth the additional spend.

If you’re wife can notice and appreciate the difference between SI and VS, that should be more than enough reason to spend the extra.

Dubshack · 13 July 2018, 03:19 AM

Quote:

Originally Posted by Burlington

Will her hair cover her ears ?

Really it’s down to you if the extra difference is worth the additional spend.

If you’re wife can notice and appreciate the difference between SI and VS, that should be more than enough reason to spend the extra.

Yes, she has long hair.

I know for a fact she likes her ring compared to some other friends of hers that are bigger, but don’t have the same sparkle and color.

My first instinct to try and match quality seems the best option here. Thanks for the insight.

Sent from my iPhone using Tapatalk

Burlington · 13 July 2018, 05:16 AM

Quote:

Originally Posted by Dubshack

Yes, she has long hair.

I know for a fact she likes her ring compared to some other friends of hers that are bigger, but don’t have the same sparkle and color.

My first instinct to try and match quality seems the best option here. Thanks for the insight.

Sent from my iPhone using Tapatalk

Sounds like the right move to me !

.brian. · 13 July 2018, 03:05 AM

I would imagine you won't even be able to tell the difference to be honest.

Chewbacca · 13 July 2018, 03:09 AM

Depends in your wife’s style.

Some ladies just want the biggest stone.

Others want the best stone.

And also what Burlington said. That’s important too.

Dubshack · 13 July 2018, 03:20 AM

Quote:

Originally Posted by Chewbacca

Depends in your wife’s style.

Some ladies just want the biggest stone.

Others want the best stone.

And also what Burlington said. That’s important too.

Quality over size for sure. Thanks.

Sent from my iPhone using Tapatalk

Chewbacca · 13 July 2018, 03:22 AM

Quote:

Originally Posted by Dubshack

Quality over size for sure. Thanks.

Sent from my iPhone using Tapatalk

There’s hope in this world.

Dubshack · 13 July 2018, 03:25 AM

Quote:

Originally Posted by Chewbacca

There’s hope in this world.

Indeed. I’m a lucky man.

Sent from my iPhone using Tapatalk

TeddyS · 13 July 2018, 05:16 AM

Quote:

Originally Posted by Chewbacca

Depends in your wife’s style.

Some ladies just want the biggest stone.

Others want the best stone.

And also what Burlington said. That’s important too.

Colour is everything with diamond if you are buying anything over half carat solitaire. You can probably get away with a lesser quality and maybe drop into the SI range to save a few quid. Although check that there is no luminescence, Cos no one needs diamonds that glow blue under ultraviolet light

Sent from my iPhone using Tapatalk

CLG23 · 13 July 2018, 04:32 AM

without pics i don’t think we can be much help. I’ve seen S and SI diamonds in brackets that look great at small sizes. What size diamonds are we talking?

Ultimately if it’s sparkles and shines the way you want, go for it

Dubshack · 13 July 2018, 04:46 AM

Quote:

Originally Posted by CLG23

without pics i don’t think we can be much help. I’ve seen S and SI diamonds in brackets that look great at small sizes. What size diamonds are we talking?

Ultimately if it’s sparkles and shines the way you want, go for it

1-1.2 total, so .5-.6 each.

Sent from my iPhone using Tapatalk

CLG23 · 13 July 2018, 05:52 AM

Quote:

Originally Posted by Dubshack

1-1.2 total, so .5-.6 each.

Sent from my iPhone using Tapatalk

That size seems fine for a SI earring. Don’t over think it though. If it looks nice do it.

Sent from my iPhone using Tapatalk

pjaffe · 13 July 2018, 05:23 AM

.5 carat range no one will be able to tell the difference between SI and VS.

enjoythemusic · 13 July 2018, 06:26 AM

Color and always best cut... then figure out clarity. That's my strategy.

Dubshack · 13 July 2018, 06:38 AM

Quote:

Originally Posted by CLG23

That size seems fine for a SI earring. Don’t over think it though. If it looks nice do it.

Sent from my iPhone using Tapatalk

The SI was fine. Just didn’t know if there was some unwritten rule on earrings and rings I had no clue about.

Quote:

Originally Posted by enjoythemusic

Color and always best cut... then figure out clarity. That's my strategy.

Good to know. Thanks.

Sent from my iPhone using Tapatalk

jrs146 · 13 July 2018, 09:44 AM

I’m picky about the diamonds I buy... when looking for studs I would have no problem going G-H and SI1. No one will be getting close enough to your wife’s ears to notice the difference so I’d avoid almost anything better and try to find a great looking set in that range.

Also, unless they’re certified expect F-H range to really be H.

Sent from my iPhone using Tapatalk

Dubshack · 13 July 2018, 01:48 PM

Quote:

Originally Posted by jrs146

I’m picky about the diamonds I buy... when looking for studs I would have no problem going G-H and SI1. No one will be getting close enough to your wife’s ears to notice the difference so I’d avoid almost anything better and try to find a great looking set in that range.

Also, unless they’re certified expect F-H range to really be H.

Sent from my iPhone using Tapatalk

I go the certified route. If I’m going to spend the money, might as well go all the way.

Sent from my iPhone using Tapatalk

s14roller · 13 July 2018, 01:57 PM

Even a large stone with the right inclusions in the right spots (feathers, etc.) will have strong eye-appeal with SI1...I'd definitely be going with a GIA SI1 stone. Color H+, VG/Ex cut. I typically go GIA triple excellent, but on earrings, probably not needed.

The GMT Master · 13 July 2018, 07:08 PM

Focus more on the proportions and quality of the cut - at the 0.50ct size, SI clarity isn't going to hurt the brightness of the stone, but a badly cut one will.

Look for how the stone scintillates - whilst the cert should be a guide to narrow down the stones you're looking at, pick the brightest stone in front of you.

Chris

lesbelleschoses_ · 14 July 2018, 08:25 PM

I agree with the opinions stated above, but would add that you should focus on the closure, because I have lost one of my diamond studs, now I am having one with a screw cap (I hope this is the right English word). Hope that helps! xx

Fat_ninja · 15 July 2018, 12:03 AM

Man made diamonds . Debeers even sells them now. Better clarity and color for a much smaller price

But separately, I’d get a bracelet and take the extra diamonds out of the bracelet and make earrings

Dubshack · 15 July 2018, 03:17 AM

Quote:

Originally Posted by lesbelleschoses_

I agree with the opinions stated above, but would add that you should focus on the closure, because I have lost one of my diamond studs, now I am having one with a screw cap (I hope this is the right English word). Hope that helps! xx

Quote:

Originally Posted by Fat_ninja

Man made diamonds . Debeers even sells them now. Better clarity and color for a much smaller price

But separately, I’d get a bracelet and take the extra diamonds out of the bracelet and make earrings

Quote:

Originally Posted by s14roller

Even a large stone with the right inclusions in the right spots (feathers, etc.) will have strong eye-appeal with SI1...I'd definitely be going with a GIA SI1 stone. Color H+, VG/Ex cut. I typically go GIA triple excellent, but on earrings, probably not needed.

Quote:

Originally Posted by The GMT Master

Focus more on the proportions and quality of the cut - at the 0.50ct size, SI clarity isn't going to hurt the brightness of the stone, but a badly cut one will.

Look for how the stone scintillates - whilst the cert should be a guide to narrow down the stones you're looking at, pick the brightest stone in front of you.

Chris

Good to know my main concern about matching up color and quality to a ring isn’t an issue.

Now I will hunt for the one that simply looks the best to me.

Sent from my iPhone using Tapatalk

Rolexgal2017 · 16 July 2018, 08:14 PM

I personally would go with quality over size. If the clarity is low then it won't sparkle as much. Definitely match the ring.

13 July 2018, 02:39 AM	#1
Dubshack "TRF" Member Join Date: Aug 2017 Real Name: Matt Location: SoCal Watch: 126334 Posts: 871	Diamond question Looking to add some diamond earrings for my wife (she has no interest in a watch ). My wife’s ring is color F and clarity VS1. I was shown some earrings in the F-H range but SI1 and SI2 clarity. My initial thought is I should stick to similar color and clarity as her ring. But wondering if being on the ear where no one will look closely is different than the hand, and the clarity isn’t as big a deal. Has anyone else gone through this process? Sent from my iPhone using Tapatalk

13 July 2018, 02:42 AM	#2
Burlington "TRF" Member Join Date: Nov 2017 Location: Europe Posts: 5,643	Will her hair cover her ears ? Really it’s down to you if the extra difference is worth the additional spend. If you’re wife can notice and appreciate the difference between SI and VS, that should be more than enough reason to spend the extra. __________________ “My tastes are simple; I am easily satisfied with the best.” ― Winston S. Churchill

13 July 2018, 06:26 AM	#15
enjoythemusic 2024 Pledge Member Join Date: Nov 2012 Real Name: Steven Location: Glocal Posts: 21,202	Color and always best cut... then figure out clarity. That's my strategy. __________________ __________________ ----> Was Great Seeing Everyone At The TRF December 9 Tampa Meetup <---- https://www.rolexforums.com/showthread.php?t=968133 Love timepieces and want to become a Watchmaker? Rolex has a sensational school. www.RolexWatchmakingTrainingCenter.com/ Sent from my Etch A Sketch using String Theory.

13 July 2018, 09:44 AM	#17
jrs146 "TRF" Member Join Date: Aug 2011 Real Name: Josh Location: Lost in time Watch: Me Nae Nae Posts: 9,823	Diamond question I’m picky about the diamonds I buy... when looking for studs I would have no problem going G-H and SI1. No one will be getting close enough to your wife’s ears to notice the difference so I’d avoid almost anything better and try to find a great looking set in that range. Also, unless they’re certified expect F-H range to really be H. Sent from my iPhone using Tapatalk __________________ "Sometimes the songs that we hear are just songs of our own." -Jerome J. Garcia, Robert C. Hunter

13 July 2018, 03:05 AM	#5
.brian. "TRF" Member Join Date: Dec 2016 Real Name: Brian Location: Bad things happen Watch: in Philadelphia Posts: 495	I would imagine you won't even be able to tell the difference to be honest.

13 July 2018, 03:09 AM	#6
Chewbacca Banned Join Date: May 2012 Real Name: CJ Location: Kashyyyk Watch: Kessel Run Chrono Posts: 21,112	Depends in your wife’s style. Some ladies just want the biggest stone. Others want the best stone. And also what Burlington said. That’s important too.

13 July 2018, 04:32 AM	#11
CLG23 "TRF" Member Join Date: Jul 2018 Location: South Florida Posts: 89	without pics i don’t think we can be much help. I’ve seen S and SI diamonds in brackets that look great at small sizes. What size diamonds are we talking? Ultimately if it’s sparkles and shines the way you want, go for it

13 July 2018, 05:23 AM	#14
pjaffe "TRF" Member Join Date: May 2016 Location: atlanta Posts: 159	.5 carat range no one will be able to tell the difference between SI and VS.

13 July 2018, 01:57 PM	#19
s14roller "TRF" Member Join Date: Jul 2011 Location: US Posts: 3,257	Even a large stone with the right inclusions in the right spots (feathers, etc.) will have strong eye-appeal with SI1...I'd definitely be going with a GIA SI1 stone. Color H+, VG/Ex cut. I typically go GIA triple excellent, but on earrings, probably not needed.

13 July 2018, 07:08 PM	#20
The GMT Master "TRF" Member Join Date: Jul 2008 Real Name: Chris Location: England Posts: 8,150	Focus more on the proportions and quality of the cut - at the 0.50ct size, SI clarity isn't going to hurt the brightness of the stone, but a badly cut one will. Look for how the stone scintillates - whilst the cert should be a guide to narrow down the stones you're looking at, pick the brightest stone in front of you. Chris

14 July 2018, 08:25 PM	#21
lesbelleschoses_ "TRF" Member Join Date: Jul 2018 Location: Austria Posts: 18	I agree with the opinions stated above, but would add that you should focus on the closure, because I have lost one of my diamond studs, now I am having one with a screw cap (I hope this is the right English word). Hope that helps! xx

15 July 2018, 12:03 AM	#22
Fat_ninja Banned Join Date: May 2018 Real Name: Jonathan Location: USA Watch: P-01 Posts: 11,772	Man made diamonds . Debeers even sells them now. Better clarity and color for a much smaller price But separately, I’d get a bracelet and take the extra diamonds out of the bracelet and make earrings

16 July 2018, 08:14 PM	#24
Rolexgal2017 "TRF" Member Join Date: Mar 2017 Location: New England Posts: 164	I personally would go with quality over size. If the clarity is low then it won't sparkle as much. Definitely match the ring.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)