Thought 1675 Pepsi

[pteryx]

Hi,

I was wondering if there are any thoughts about this 1979 piece, it's going for about $14k

- is the insert appropriate for its age?
- are the lugs over polished?

Thanks!

[henrylee]

The first photo, the magnification looks low. Otherwise nice patina.

[Filipão]

Lupe might seem off due to proximity of phone's lens.

I love it.

Perfect insert, thick lugs though it has been polished.

All around great even coloration of T hands/plots!

[CRM114]

Later tritium service dial, looks like.

[pteryx]

Originally Posted by CRM114

Later tritium service dial, looks like.

Can i ask why do you say that?

[pteryx]

Also, is this gear supposed to be yellow/gold instead of silver?

Thanks!

[petehk]

This is a good resource for service dials...

https://gmtmaster1675.com/mark-6-service-dials/

Sent from my ONEPLUS A6003 using Tapatalk

[Hub6152]

Originally Posted by pteryx

Also, is this gear supposed to be yellow/gold instead of silver?



Thanks!



Attachment 1029632

The mainspring barrel is what you’re pointing too and normally they are “gold” coloured. Aftermarket replacement as a genuine Rolex part would be brass. However it’s a cosmetic thing that doesn’t affect the function and a genuine barrel isn’t difficult to find to replace at some future service.

[pteryx]

Originally Posted by Hub6152

The mainspring barrel is what you’re pointing too and normally they are “gold” coloured. Aftermarket replacement as a genuine Rolex part would be brass. However it’s a cosmetic thing that doesn’t affect the function and a genuine barrel isn’t difficult to find to replace at some future service.

Thanks! Am I right to assume that it wouldn't affect the value of the watch?

Sent from my SM-G930F using Tapatalk

[pteryx]

Originally Posted by petehk

This is a good resource for service dials...

Sent from my ONEPLUS A6003 using Tapatalk

That's an excellent resource, thanks a lot. So a service dial for this age can still be its original dial, am I right?

Sent from my SM-G930F using Tapatalk

[Hub6152]

Originally Posted by pteryx

Thanks! Am I right to assume that it wouldn't affect the value of the watch?

Sent from my SM-G930F using Tapatalk

Not really. Mainspring barrels are a routinely replaced item at service much like car tyres, but certainly I’d have it replaced by the correct one at some future stage. If you’re buying this watch you might be able to use it as a bargaining chip!!

[springer]

Originally Posted by pteryx

That's an excellent resource, thanks a lot. So a service dial for this age can still be its original dial, am I right?

Sent from my SM-G930F using Tapatalk

The dial on your watch is unquestionably a service dial. A Mark VI dial could be found on late 1970s GMTs as an original dial.

While Mark V and Mark VI dials can be found on much earlier GMTs - when they were used as service dials before the introduction of the Rolex service dials - they are regular production dials and should not be confused with the later production service dials.

The service dials at gmtmaster1675.com are very confusing and I wish he would remove the non service regular production dials from the known service dials.

[pteryx]

Originally Posted by springer

The dial on your watch is unquestionably a service dial. A Mark VI dial could be found on late 1970s GMTs as an original dial.

While Mark V and Mark VI dials can be found on much earlier GMTs - when they were used as service dials before the introduction of the Rolex service dials - they are regular production dials and should not be confused with the later production service dials.

The service dials at gmtmaster1675 are very confusing and I wish he would remove the non service regular production dials from the known service dials.

Thanks a lot springer, that's useful!

Would a service dial be worth considerably less than it is listed for?

Sent from my SM-G930F using Tapatalk

[pteryx]

Originally Posted by springer

The dial on your watch is unquestionably a service dial. A Mark VI dial could be found on late 1970s GMTs as an original dial.

While Mark V and Mark VI dials can be found on much earlier GMTs - when they were used as service dials before the introduction of the Rolex service dials - they are regular production dials and should not be confused with the later production service dials.

The service dials at gmtmaster1675 are very confusing and I wish he would remove the non service regular production dials from the known service dials.

Do you have any idea which period this service dial belongs to?

Sent from my SM-G930F using Tapatalk

[alwayshere]

did you bother to actually read any of the guides that the other members have given to you?

Frustrating that you just keep asking questions despite the other member's attempt to steer you in the right direction to do your own research

[pteryx]

Yes I do. I also believe it is useful to have more than a singular source of information, especially on topics where there is a scarcity of information and no official documents to confirm the veracity.

Case in point, springer pointing out some discrepancy on gmtmaster's site.

And I am grateful for those who have been gracious and taken time off to share their expertise.


Sent from my SM-G930F using Tapatalk