ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

madbar · 8 July 2020, 07:37 PM

this is a M serial this date font to me looks not to be orginal rolex, can any1 expirenced person give there opinion, also if clasp is coded PJ is it normal for braclet to be coded EO? or it must match, and is this bezel correct orginal rolex as the 50 looks off.
please share your knowledge if any1 can confirm if this is legit or after market

madbar · 9 July 2020, 01:55 AM

does any1 know?

faimag · 9 July 2020, 02:57 AM

You are concerned about the "50" yet in the 2 close-up pics you show pretty much all the bezel insert except the 50?

There is nothing odd in my eyes from these pics.

M serial is 2007-2008.
OE on the bracelet is 2007; PJ is 2008. All dates codes match but are you suggesting your clasp has two date codes? (not good) Or do you mean there is PJ on the clasp and OE in the inner side of the endlinks? (that's fine)

madbar · 9 July 2020, 02:58 AM

date font looks very off, ive never seen another 1 like it

Etschell · 9 July 2020, 03:05 AM

Quote:

Originally Posted by madbar

date font looks very off, ive never seen another 1 like it

x2. i would pass.

ddubb · 9 July 2020, 03:10 AM

I am by no means an expert, but that date font is not the Rolex font

Al1969 · 9 July 2020, 03:10 AM

Did you create two threads for same watch or two different watches?
Just looked at mine 2008 M series and the date font looks nothing like the one you posted.

Boaters · 9 July 2020, 03:11 AM

If any doubts or unsure pass.

illiguy · 9 July 2020, 03:34 AM

I’d be cautious here. No papers to (perhaps) help validate?

madbar · 9 July 2020, 03:37 AM

a watch buddy of mine bought it. has the card and all said he will change the date wheel. movment looks all good.
just very very odd date font

spacedinvader · 9 July 2020, 04:46 AM

I have seen a replica Kermit with the same thick date font. It comes with a clone 3135 movement. Difficult to see on these blurred photos but other tells are sharp pointy corners on dial indices at 12 (triangle), 6 and 9 (rectangle), rather than the soft curved corners on a genuine dial. Also indentation of solid end links from case might not be perfectly uniform and recessed. Sometimes rehaut can be “wokky”, as in doesn’t meet dial at 90° so resembles edge of a wok. ¯\_(ツ)_/¯

Rado63 · 9 July 2020, 05:45 AM

The date wheel font looks different but the alignment of the bezel markings looks off too, but that could just be the photos.

JohnnyM · 9 July 2020, 05:48 AM

If you are asking then I assume its being listed at a price below market. There are no steals in Rolex, if the price is too low, then that should tell you there is something wrong.

fooey · 9 July 2020, 05:59 AM

oh dear! what did he pay for it?

madbar · 9 July 2020, 06:04 AM

12 700euros

ToyotaMoe · 9 July 2020, 12:30 PM

Quote:

Originally Posted by madbar

12 700euros

Omg
Ouch. Where did he buy it from?

AF_Rob · 9 July 2020, 01:26 PM

2 threads, asking for a friend. Who opened it up for him to verify the movement?

Sent from my iPhone using Tapatalk

Ringhio · 9 July 2020, 04:46 PM

Bezel looks fake to me.
Date is objectively fake.
I doubt anyone would pay 12.7k euros for this.

but the question is why you open multiple treads about the same replica?

Andad · 9 July 2020, 05:13 PM

My ‘M’.

Loevhagen · 10 July 2020, 06:29 AM

https://www.rolexforums.com/showthread.php?t=751384

8 July 2020, 07:37 PM	#1
madbar Banned Join Date: Jul 2020 Location: europe Posts: 34	HELP Needed, 16610lv kermit looks odd this is a M serial this date font to me looks not to be orginal rolex, can any1 expirenced person give there opinion, also if clasp is coded PJ is it normal for braclet to be coded EO? or it must match, and is this bezel correct orginal rolex as the 50 looks off. please share your knowledge if any1 can confirm if this is legit or after market Attached Images

9 July 2020, 03:10 AM	#7
Al1969 2024 Pledge Member Join Date: May 2008 Location: New Jersey Posts: 6,640	Did you create two threads for same watch or two different watches? Just looked at mine 2008 M series and the date font looks nothing like the one you posted. Attached Images __________________ WG SUB-116719 GMT MASTER II 126719

9 July 2020, 05:45 AM	#12
Rado63 "TRF" Member Join Date: May 2017 Real Name: Alan Location: Northern, CA Watch: 116334 Posts: 2,215	The date wheel font looks different but the alignment of the bezel markings looks off too, but that could just be the photos. __________________ Rolex 116334 126600 228235

9 July 2020, 05:13 PM	#19
Andad 2024 SubLV41 Pledge Member Join Date: Nov 2006 Real Name: Eddie Location: Australia Watch: A few. Posts: 37,526	My ‘M’. Attached Images __________________ E

9 July 2020, 01:55 AM	#2
madbar Banned Join Date: Jul 2020 Location: europe Posts: 34	does any1 know?

9 July 2020, 02:57 AM	#3
faimag "TRF" Member Join Date: Feb 2016 Location: US, SG, DK, GR Watch: Reverso Posts: 3,089	You are concerned about the "50" yet in the 2 close-up pics you show pretty much all the bezel insert except the 50? There is nothing odd in my eyes from these pics. M serial is 2007-2008. OE on the bracelet is 2007; PJ is 2008. All dates codes match but are you suggesting your clasp has two date codes? (not good) Or do you mean there is PJ on the clasp and OE in the inner side of the endlinks? (that's fine)

9 July 2020, 02:58 AM	#4
madbar Banned Join Date: Jul 2020 Location: europe Posts: 34	date font looks very off, ive never seen another 1 like it

9 July 2020, 03:10 AM	#6
ddubb "TRF" Member Join Date: Jun 2015 Location: SE USA Posts: 153	I am by no means an expert, but that date font is not the Rolex font

9 July 2020, 03:11 AM	#8
Boaters 2024 Pledge Member Join Date: May 2015 Real Name: Mike Location: Pacific Northwest Watch: 116610LV 16710 SD Posts: 10,653	If any doubts or unsure pass.

9 July 2020, 03:34 AM	#9
illiguy 2024 SubLV41 Pledge Member Join Date: Dec 2013 Location: UTC/GMT -5 Posts: 3,662	I’d be cautious here. No papers to (perhaps) help validate?

9 July 2020, 03:37 AM	#10
madbar Banned Join Date: Jul 2020 Location: europe Posts: 34	a watch buddy of mine bought it. has the card and all said he will change the date wheel. movment looks all good. just very very odd date font

9 July 2020, 04:46 AM	#11
spacedinvader "TRF" Member Join Date: Jun 2018 Location: London Posts: 148	I have seen a replica Kermit with the same thick date font. It comes with a clone 3135 movement. Difficult to see on these blurred photos but other tells are sharp pointy corners on dial indices at 12 (triangle), 6 and 9 (rectangle), rather than the soft curved corners on a genuine dial. Also indentation of solid end links from case might not be perfectly uniform and recessed. Sometimes rehaut can be “wokky”, as in doesn’t meet dial at 90° so resembles edge of a wok. ¯\_(ツ)_/¯

9 July 2020, 05:48 AM	#13
JohnnyM Banned Join Date: Jun 2020 Location: Merica Watch: All the good ones Posts: 173	If you are asking then I assume its being listed at a price below market. There are no steals in Rolex, if the price is too low, then that should tell you there is something wrong.

9 July 2020, 05:59 AM	#14
fooey "TRF" Member Join Date: Nov 2019 Real Name: marco Location: UK Watch: Quite a few now! Posts: 1,320	oh dear! what did he pay for it?

9 July 2020, 06:04 AM	#15
madbar Banned Join Date: Jul 2020 Location: europe Posts: 34	12 700euros

9 July 2020, 01:26 PM	#17
AF_Rob "TRF" Member Join Date: May 2012 Real Name: Rob Location: Virginia Watch: Sub/Polar/OP/BB Posts: 4,671	2 threads, asking for a friend. Who opened it up for him to verify the movement? Sent from my iPhone using Tapatalk

9 July 2020, 04:46 PM	#18
Ringhio "TRF" Member Join Date: Jun 2020 Location: NYC Posts: 471	Bezel looks fake to me. Date is objectively fake. I doubt anyone would pay 12.7k euros for this. but the question is why you open multiple treads about the same replica?

10 July 2020, 06:29 AM	#20
Loevhagen "TRF" Member Join Date: May 2014 Location: The aperture Posts: 4,941	https://www.rolexforums.com/showthread.php?t=751384

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)