ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

crowncollection · 12 September 2012, 08:40 AM

hi, i took the 3155 movement out of my 18238 president rolex to clean the case and of course the crown and stem out had to come out, i have done this before no problems. however, now when i put the crown and stem back and the movement in the case the day and date work but the watch does not engage in the winding position, it appears just to be slipping in that position. it cannot be manuallly wound.

I have heard about dislodging the Yoke or Yoke spring in other posts, have i likely done this or something bigger, how much do i have to pay to have it fixed now approx at an independent, is it a big job ? as i cannot fix the movement myself. thanks in Advance ?

Rikki · 12 September 2012, 10:45 AM

Sounds like the slide pinion is off the setting yoke so the auto bridge plus winding bridge will have to come off reset the gear you should be good to go. All can be done with the movement in the case. Rikki

12 September 2012, 08:40 AM	#1
crowncollection "TRF" Member Join Date: Jan 2011 Real Name: David Location: australia Posts: 20,216	help please watch no longer winds hi, i took the 3155 movement out of my 18238 president rolex to clean the case and of course the crown and stem out had to come out, i have done this before no problems. however, now when i put the crown and stem back and the movement in the case the day and date work but the watch does not engage in the winding position, it appears just to be slipping in that position. it cannot be manuallly wound. I have heard about dislodging the Yoke or Yoke spring in other posts, have i likely done this or something bigger, how much do i have to pay to have it fixed now approx at an independent, is it a big job ? as i cannot fix the movement myself. thanks in Advance ? __________________ watches many

12 September 2012, 10:45 AM	#2
Rikki TechXpert Join Date: Jun 2009 Real Name: Rik Dietel Location: Seminole Fla Watch: 5512 s/s Sub Posts: 1,818	Sounds like the slide pinion is off the setting yoke so the auto bridge plus winding bridge will have to come off reset the gear you should be good to go. All can be done with the movement in the case. Rikki __________________ Century 21 Certified watchmaker Omega Service Provider Trained Omega OWME Certified. Rolex Parts Account Holder.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)