ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

katana · 23 October 2012, 01:53 AM

Hey, need some help, if what you think about this 1675-0 It should be from 1959/60 132XXX Movement no. D.9377 These are pictures, also information from the auction ...

Thank you.

Regards Paradis

Submarino · 23 October 2012, 02:19 AM

Serial number 132xxx would be around 1941. If you missed a digit (which I believe you did) should be from around 1955-1956, the GMT Master was launched in 1954 but as ref. 6542 with no crown guards and gilt dial. The 1675 was launched until 1960 with pointed crown guards (cornino). You could be looking at a 'frankenwatch'. The hands are not correct for the time period of for a gilt dial GMT. The bezel is not correct either for the time period you state. A GMT from the time period you mention (based on the serial number) should come with a bakelite bezel insert and a brass bezel setup, no crown guards, gilt dial, gilt hands and small GMT red hand.

If it's from 1959 it cannot be a 1675 or a 16750. The 16750 is a quick-set from the early 80's.

TimeToGo · 23 October 2012, 02:40 AM

You are missing the information from the auction. Can you re-copy?

Also, 1.3 mil should be around 1965.

katana · 23 October 2012, 02:55 AM

Yes, I missed, serial 132XXXX movement D.93757 rolex GMT 1675-0 Information is from Tradera Swedish auction site.

joe100 · 23 October 2012, 03:29 AM

Careful not to confuse the 1675-0 with the 16750. The "-0" denotes stainless steel

Sent from my  using Tapatalk

1675-David · 23 October 2012, 03:41 AM

Looks a bit like a bit of this and a bit of that has been used to put this watch together. Regular services can often account for a disparity of pieces in a watch that is 40+ years old but in this case the hands are a bit of a give away, when hands are replaced at service they don't leave a badly discolored, probably relumed second hand in place while replacing the others, that and the fact that GMT hand just happened to be hidden behind the cyclops would urge me to proceed with care. The dial, case and bezel look OK but the insert hands and date wheel don't look original to this watch.

If you have the time and patience this could be an interesting project watch, but not if the price goes much higher.

Good luck!

Kiwinz · 23 October 2012, 03:47 AM

I wouldn't, Mate.

Too many things fishy and wonder how worn out the Jubilee is as well??

Keep looking.

katana · 23 October 2012, 04:06 AM

36 bids, 5days left .... price is now around 4000 usd .......... Thanks for the help, I decline.

1675-David · 23 October 2012, 04:14 AM

Check out Jacek, he's alway got a few nice 1675 on offer...

Kingair · 23 October 2012, 04:34 AM

Quote:

Originally Posted by 1675-David

Check out Jacek, he's alway got a few nice 1675 on offer...

x 2

Better option and correct watches

HAGOne

katana · 23 October 2012, 05:07 AM

My next watch will be 5513 gilt dial, but the owner of the watch 1675-0 said , look at it ...... why I wanted to check with you first. It would have been ok, maybe I had changed my mind. Now it is not so, but thanks for all the help.

1675-David · 23 October 2012, 07:25 AM

Good move

23 October 2012, 01:53 AM	#1
katana "TRF" Member Join Date: Jan 2010 Real Name: Paradis Location: Sweden Watch: Sub.1680/ Datejust Posts: 885	Rolex GMT 1675 ??????? Hey, need some help, if what you think about this 1675-0 It should be from 1959/60 132XXX Movement no. D.9377 These are pictures, also information from the auction ... Thank you. Regards Paradis Attached Images __________________

23 October 2012, 02:19 AM	#2
Submarino "TRF" Member Join Date: Aug 2009 Real Name: Mr. H Location: Dallas Watch: them for me! Posts: 7,180	Serial number 132xxx would be around 1941. If you missed a digit (which I believe you did) should be from around 1955-1956, the GMT Master was launched in 1954 but as ref. 6542 with no crown guards and gilt dial. The 1675 was launched until 1960 with pointed crown guards (cornino). You could be looking at a 'frankenwatch'. The hands are not correct for the time period of for a gilt dial GMT. The bezel is not correct either for the time period you state. A GMT from the time period you mention (based on the serial number) should come with a bakelite bezel insert and a brass bezel setup, no crown guards, gilt dial, gilt hands and small GMT red hand. If it's from 1959 it cannot be a 1675 or a 16750. The 16750 is a quick-set from the early 80's. __________________ WATCHES ARE THE NEW CURRENCY!/ MEMBER 27491/OFFICIALLY DESIGNATED OLD TIMER /AP OWNERS CLUB MEMBER Instagram @watchcollectinglifestyle

23 October 2012, 02:55 AM	#4
katana "TRF" Member Join Date: Jan 2010 Real Name: Paradis Location: Sweden Watch: Sub.1680/ Datejust Posts: 885	Yes, I missed, serial 132XXXX movement D.93757 rolex GMT 1675-0 Information is from Tradera Swedish auction site. __________________

23 October 2012, 03:29 AM	#5
joe100 2024 SubLV41 Pledge Member Join Date: Nov 2007 Real Name: Joe Location: New Mexico Watch: Explorer Posts: 12,840	Careful not to confuse the 1675-0 with the 16750. The "-0" denotes stainless steel Sent from my  using Tapatalk __________________ It's Espresso, not Expresso. Coffee is not a train in Italy. -TRF Member 6982-

23 October 2012, 04:06 AM	#8
katana "TRF" Member Join Date: Jan 2010 Real Name: Paradis Location: Sweden Watch: Sub.1680/ Datejust Posts: 885	36 bids, 5days left .... price is now around 4000 usd .......... Thanks for the help, I decline. __________________

23 October 2012, 02:40 AM	#3
TimeToGo 2024 SubLV41 Pledge Member Join Date: Sep 2008 Location: North Florida Posts: 16,737	You are missing the information from the auction. Can you re-copy? Also, 1.3 mil should be around 1965.

23 October 2012, 03:41 AM	#6
1675-David "TRF" Member Join Date: Jan 2011 Location: Stockholm Posts: 6,061	Looks a bit like a bit of this and a bit of that has been used to put this watch together. Regular services can often account for a disparity of pieces in a watch that is 40+ years old but in this case the hands are a bit of a give away, when hands are replaced at service they don't leave a badly discolored, probably relumed second hand in place while replacing the others, that and the fact that GMT hand just happened to be hidden behind the cyclops would urge me to proceed with care. The dial, case and bezel look OK but the insert hands and date wheel don't look original to this watch. If you have the time and patience this could be an interesting project watch, but not if the price goes much higher. Good luck!

23 October 2012, 03:47 AM	#7
Kiwinz Banned Join Date: Apr 2011 Real Name: Mario Location: USA / NZ Watch: All sorts Posts: 799	I wouldn't, Mate. Too many things fishy and wonder how worn out the Jubilee is as well?? Keep looking.

23 October 2012, 04:14 AM	#9
1675-David "TRF" Member Join Date: Jan 2011 Location: Stockholm Posts: 6,061	Check out Jacek, he's alway got a few nice 1675 on offer...

23 October 2012, 05:07 AM	#11
katana "TRF" Member Join Date: Jan 2010 Real Name: Paradis Location: Sweden Watch: Sub.1680/ Datejust Posts: 885	My next watch will be 5513 gilt dial, but the owner of the watch 1675-0 said , look at it ...... why I wanted to check with you first. It would have been ok, maybe I had changed my mind. Now it is not so, but thanks for all the help. __________________

23 October 2012, 07:25 AM	#12
1675-David "TRF" Member Join Date: Jan 2011 Location: Stockholm Posts: 6,061	Good move

Currently Active Users Viewing This Thread: 7 (0 members and 7 guests)