ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

31 January 2006, 03:43 AM

With our crazy temperature fluctuations here (like 22C drop in 24 hours) my wrists have been changing size. I bought my Black Monster off Daren and I have to say it went on perfectly without sizing. Granted, when I got it, the temperature was well below zero so the wrists were smaller.

Anyways, I've heard nightmares about changing links on a BM bracelet and it's not that bad. It's held together with pins and sleeves (i.e. one sleeve on each end of each pin, one seems stationery, one not).

But it was pretty straight forward. I just put the stationery pin side in first, then put the sleeve in on the other side and used my springbar tool to push it home. Then I just put the stationery side on a hard surface (since it had pushed out, from the force of the stationery pin going on halfway).

A simple push in and voila! It's done.

JJ Irani · 31 January 2006, 03:45 AM

C.J. · 31 January 2006, 04:55 AM

You make it sound easier than it is.

I hate dealing with sleeves.

31 January 2006, 05:13 AM

Quote:

Originally Posted by C.J.

You make it sound easier than it is.

I hate dealing with sleeves.

CJ, just roll them up. Besides, then you can impress people with your lovely Rolex being more visible.

dman · 31 January 2006, 07:20 AM

Sounds simple and well done J!

31 January 2006, 07:24 AM

Quote:

Originally Posted by dman

Sounds simple and well done J!

It sounds simple because it has to be. Anything beyond simple is beyond this feeble pea-brain.

dman · 31 January 2006, 07:29 AM

Quote:

Originally Posted by Atomic

It sounds simple because it has to be. Anything beyond simple is beyond this feeble pea-brain.

(Padi alert!!!) I resemble that remark.

31 January 2006, 07:33 AM

Quote:

Originally Posted by dman

(Padi alert!!!) I resemble that remark.

Birds of a feather my friend... birds of a feather!

dman · 31 January 2006, 07:34 AM

Quote:

Originally Posted by Atomic

Birds of a feather my friend... birds of a feather!

31 January 2006, 03:43 AM	#1
Atomic Guest Posts: n/a	Added a link With our crazy temperature fluctuations here (like 22C drop in 24 hours) my wrists have been changing size. I bought my Black Monster off Daren and I have to say it went on perfectly without sizing. Granted, when I got it, the temperature was well below zero so the wrists were smaller. Anyways, I've heard nightmares about changing links on a BM bracelet and it's not that bad. It's held together with pins and sleeves (i.e. one sleeve on each end of each pin, one seems stationery, one not). But it was pretty straight forward. I just put the stationery pin side in first, then put the sleeve in on the other side and used my springbar tool to push it home. Then I just put the stationery side on a hard surface (since it had pushed out, from the force of the stationery pin going on halfway). A simple push in and voila! It's done.

31 January 2006, 03:45 AM	#2
JJ Irani Fondly Remembered Join Date: May 2005 Real Name: JJ Location: Auckland, NZ Watch: ALL SOLD!! Posts: 74,319	__________________ Words fail me in expressing my utmost thanks to ALL of you for this wonderful support during my hour of need!! I firmly believe that my time on planet earth is NOT yet up!! I shall fight this to the very end.......and WIN!!

31 January 2006, 07:20 AM	#5
dman Lifetime TRF Patron Join Date: May 2005 Real Name: Daren Location: Austin Watch: the road Posts: 13,585	Sounds simple and well done J! __________________ You either get it or you don't, if you have to ask, YOU DON'T!! I really hope that midget cop doesn't find me in Kokomo.

31 January 2006, 04:55 AM	#3
C.J. "TRF" Member Join Date: Jan 2006 Location: * Posts: 10,196	You make it sound easier than it is. I hate dealing with sleeves.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)