The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX


Go Back   Rolex Forums - Rolex Forum > Rolex & Tudor Watch Topics > Vintage Rolex Discussion

Reply
 
Thread Tools Display Modes
Old 7 September 2015, 02:59 AM   #1
Bunny4jeff
"TRF" Member
 
Join Date: Jun 2012
Real Name: Jan Ellis
Location: United Kingdom
Watch: 1950s Rolex Oyster
Posts: 46
Icon7 Vintage Oyster Precision 6426 or not?

Hi, I recently bought a cute-looking Rolex Oyster Precision, ladies model, which surprises me as it has a design number of 6426. Which, I read, belongs to a mans steel bracelet model, dating from the '60s. The serial number between the lugs starts with 166 which is correct for the 6426. However as can be seen, mine looks totally different, in more ways than one lol. It had no box or papers, alarm bells I know, but naturally it was a very reasonable cost, it works, and I like it...call it female logic if you no doubt will..
Does anyone have an answer to this puzzle, ie. does, or did, Rolex ever attribute differing styles of watch to their design numbers? The watch I have also looks much older in design, than the mans model attributed to the 6426. Mine looks from the 40s or 50s but that makes no sense to me. Photos attached.
Anything useful would be useful to me. Thanks in advance. [ATTACH]Name:  20150906_170938_resized.jpg
Views: 340
Size:  196.7 KB[/ATTACH]
Attached Images
 
Bunny4jeff is offline   Reply With Quote
Old 7 September 2015, 03:49 AM   #2
erlendh
"TRF" Member
 
Join Date: Jan 2012
Location: Norway
Posts: 27
How big is it? The 6426 is 34 mm in diameter, not including crown, and that is not a ladies model. Rolex ladies models were a lot smaller back in the days.

So if it's 34 mm, you've got yourself a great vintage men's model Oyster Precision (and that is a size that works very well as a ladies watch today). But if it's smaller than 34 mm, it's not a 6426 (in that case I have no explanation why it would have that ref. engraved between the lugs, but the 6426 is 34 mm, that's for sure).

The 6426 should have the cal. 1210 or 1220 iirc. The correct bracelet is 78350 with 557 end links.

If the dial is original or a re-dial, I wouldn't know, I'm not an expert on those things.
erlendh is offline   Reply With Quote
Old 7 September 2015, 06:33 AM   #3
Bunny4jeff
"TRF" Member
 
Join Date: Jun 2012
Real Name: Jan Ellis
Location: United Kingdom
Watch: 1950s Rolex Oyster
Posts: 46
Mine is 28 mm across, if I'm measuring correctly (could be 29) without incl the crown. This mystifies me also as I realise it should be bigger.The mystery deepens! The width of the lugs gap is 18 mm. I will be sending it for a service. As its got a few question marks, hopefully these will be resolved.
Bunny4jeff is offline   Reply With Quote
Old 7 September 2015, 07:51 AM   #4
MILGAUSS88
"TRF" Member
 
MILGAUSS88's Avatar
 
Join Date: Jun 2014
Location: mississippi river
Posts: 3,193
It is a man's watch.
A small one, but still a man's watch.
MILGAUSS88 is online now   Reply With Quote
Old 7 September 2015, 07:56 AM   #5
MILGAUSS88
"TRF" Member
 
MILGAUSS88's Avatar
 
Join Date: Jun 2014
Location: mississippi river
Posts: 3,193
I believe they did re-use reference numbers.
I believe early Explorers and some Air Kings share reference numbers with un-named models.
Watch looks like it is from 40's, possibly early 50's.
MILGAUSS88 is online now   Reply With Quote
Old 7 September 2015, 07:29 PM   #6
Bunny4jeff
"TRF" Member
 
Join Date: Jun 2012
Real Name: Jan Ellis
Location: United Kingdom
Watch: 1950s Rolex Oyster
Posts: 46
Quote:
Originally Posted by MILGAUSS88 View Post
I believe they did re-use reference numbers.
I believe early Explorers and some Air Kings share reference numbers with un-named models.
Watch looks like it is from 40's, possibly early 50's.
Hi, many thanks for that, it makes more sense now. However, the serial number starts with 166 which dates to the '60s..?!
Bunny4jeff is offline   Reply With Quote
Old 7 September 2015, 08:25 PM   #7
Old Expat Beast
TRF Moderator & 2024 SubLV41 Patron
 
Old Expat Beast's Avatar
 
Join Date: Jul 2013
Real Name: Adam
Location: Far East
Watch: Golden Tuna
Posts: 28,826
Quote:
Originally Posted by Bunny4jeff View Post
Hi, many thanks for that, it makes more sense now. However, the serial number starts with 166 which dates to the '60s..?!
Depends how many digits. If six, then it could be early/mid 40s or mid/late 50s (rolex reset the serial sequence around 1954). If seven digits, then 1967-ish.
Old Expat Beast is offline   Reply With Quote
Old 7 September 2015, 10:48 PM   #8
Bunny4jeff
"TRF" Member
 
Join Date: Jun 2012
Real Name: Jan Ellis
Location: United Kingdom
Watch: 1950s Rolex Oyster
Posts: 46
Quote:
Originally Posted by Old Expat Beast View Post
Depends how many digits. If six, then it could be early/mid 40s or mid/late 50s (rolex reset the serial sequence around 1954). If seven digits, then 1967-ish.
There's definitely seven digits. Maybe its a re-issue of an older model? Thank you, guys, for your help and tips, it is appreciated, even so it remains an enigma to me, as I can't figure why it has a much older-style shape, dial, etc. than the serial suggests.
Bunny4jeff is offline   Reply With Quote
Old 16 September 2015, 01:18 AM   #9
Bunny4jeff
"TRF" Member
 
Join Date: Jun 2012
Real Name: Jan Ellis
Location: United Kingdom
Watch: 1950s Rolex Oyster
Posts: 46
Icon14

Not being sure of its value, I decided to grant it the benefit of any doubt and send it off to William Rice Watches, recommended in the Vintage forum, for a service and their valued opinion etc. They received it today, and so far have informed me that it was originally supplied with a leather strap, so I will get them to fit a new genuine Rolex strap. Even if the eventual value is not worth much more than my total spend, it will give me lots of pleasure, and many more years of great time :-) However I would still be interested, if anyone has an idea, what its value might be once it is serviced, and the strap is replaced.
Thanks for all the advice.
Bunny4jeff is offline   Reply With Quote
Old 15 November 2015, 09:46 AM   #10
Bunny4jeff
"TRF" Member
 
Join Date: Jun 2012
Real Name: Jan Ellis
Location: United Kingdom
Watch: 1950s Rolex Oyster
Posts: 46
Icon14 Facelift...

Quote:
Originally Posted by MILGAUSS88 View Post
I believe they did re-use reference numbers.
I believe early Explorers and some Air Kings share reference numbers with un-named models.
Watch looks like it is from 40's, possibly early 50's.
Found I needed to get a service on the watch, as it was gaining a couple of hours a day. I bought it at a low price on ebay...possibly the beginner's fave route..? so figured it was worth spending on a good service. I chose William Rice watches in Yorkshire, as highly regarded by you guys. For a very reasonable cost, Bill and Heather really looked after my pride and joy, and were able to date it to Feb 1956. I had thought it originally had a metal strap, but no, it was leather, so I decided to do it proud and replace the old non-Rolex leather strap with the real thing. Of course, Bill as always, treated it sympathetically, no over-polishing, just a good clean and re-oil. The mainspring needed replacing, as somewhere in its lifetime, it had been fitted with one that was too large...! As it was a like-for-like exchange, I didnt have to pay for the replaced spring. The watch now looks marvellous, even if it has all added up to close or possibly more than its actual worth, to me it is well worthwhile to be able to wear it now as it should be, with pride :-D. I do have a couple of other vintage Rolex's, from the 60's, but this one is my favourite. Well, it does have a very cute face... Any ripple effects appearing on the dial is down to lighting, nothing like that on the actual dial. There is definitely something very appealing about vintages! Added are a couple of pics, after the service.
Attached Images
       
Bunny4jeff is offline   Reply With Quote
Old 16 November 2015, 12:38 AM   #11
adam78
"TRF" Member
 
adam78's Avatar
 
Join Date: Feb 2009
Location: Chicago
Posts: 1,830
That's a very interesting dial and hands combo. Enjoy wearing it!
__________________
Cheers, Adam
adam78 is offline   Reply With Quote
Old 16 November 2015, 05:21 AM   #12
Bunny4jeff
"TRF" Member
 
Join Date: Jun 2012
Real Name: Jan Ellis
Location: United Kingdom
Watch: 1950s Rolex Oyster
Posts: 46
Quote:
Originally Posted by adam78 View Post
That's a very interesting dial and hands combo. Enjoy wearing it!
Thanks, Adam, I absolutely do! So far I've had nothing but surprise at its unusual style, and charming looks :-). It may not be a beauty queen in the usual sense...but it has plenty of style and character!
Bunny4jeff is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Wrist Aficionado

My Watch LLC

WatchesOff5th

DavidSW Watches

Takuya Watches

OCWatches


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.