ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

thenewguyguys · 2 June 2016, 12:39 AM

Hi

A "screw" on my 93150 clasp has bent over so I cant close it properly. When I went to a Rolex AD they said it would cost $50-180, I asked the guy if they would replace the whole clasp or just the bent "screw" he wasn't sure. What do you guys think, is the price fair? do I need to buy a whole new clasp? Would it be cheaper to do it myself?

NKflyer · 2 June 2016, 12:43 AM

Very common and easy to fix. Just get a new rivet installed by any competent jeweler or watchmaker.

HERITAGE82 · 2 June 2016, 12:43 AM

You can bend it back without a problem I have done it myself numerous times. Just wrap needle nose pliers in tape and straighten the pin.

southtexas · 2 June 2016, 05:14 AM

Agree with try it youself. If you break it, well then you're in the same position as you are now but with a lesson learned (being, don't listen to us ;) ).

Sent from my iPhone using Tapatalk

HERITAGE82 · 2 June 2016, 05:32 AM

Quote:

Originally Posted by southtexas

Agree with try it youself. If you break it, well then you're in the same position as you are now but with a lesson learned (being, don't listen to us ;) ).

Sent from my iPhone using Tapatalk

The pin is a lot stronger than it looks and as long as he applies light constant pressure till it realigns I highly doubt the steel pin would snap/break.

I agree with above that you do this at your own risk, but I will say that I used to be afraid to "fix" issues with my bracelets until I realized they weren't as fragile as I expected. Also I have found that I use more care/caution that most jewelry/watch repair people.

southtexas · 2 June 2016, 11:40 AM

Quote:

Originally Posted by HERITAGE82

The pin is a lot stronger than it looks and as long as he applies light constant pressure till it realigns I highly doubt the steel pin would snap/break.

I agree with above that you do this at your own risk, but I will say that I used to be afraid to "fix" issues with my bracelets until I realized they weren't as fragile as I expected. Also I have found that I use more care/caution that most jewelry/watch repair people.

Fully agreed as to all. I've found a set of needle nose pliers with tape on the nose is an excellent Rolex bracelet adjustment apparatus.

Sent from my iPhone using Tapatalk

RC2 · 2 June 2016, 12:22 PM

And.....

2 June 2016, 12:43 AM	#3
HERITAGE82 "TRF" Member Join Date: Feb 2010 Location: South Florida Posts: 3,435	You can bend it back without a problem I have done it myself numerous times. Just wrap needle nose pliers in tape and straighten the pin. __________________ - Rolex Explorer - 214270 - Tudor Black Bay - 79230B - Tudor Chronograph - 79270P - Breitling Chronomat - 10th Anniv. - Huguenin Freres Speedmaster Prototype

2 June 2016, 05:14 AM	#4
southtexas 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: May 2011 Location: Great State of TX Posts: 5,761	Agree with try it youself. If you break it, well then you're in the same position as you are now but with a lesson learned (being, don't listen to us ;) ). Sent from my iPhone using Tapatalk __________________ Forty six & 2 are just ahead of me. Follow me on Instagram @ccrolex

2 June 2016, 12:22 PM	#7
RC2 "TRF" Member Join Date: Sep 2009 Real Name: Rich Location: NC Watch: Rolex 1675 Posts: 2,359	And..... __________________ Rich Member of Nylon Nation Red Sox Nation Instagram watchguy97

2 June 2016, 12:43 AM	#2
NKflyer 2024 Pledge Member Join Date: Jan 2012 Real Name: Richard Location: Colorado Posts: 2,858	Very common and easy to fix. Just get a new rivet installed by any competent jeweler or watchmaker.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)