ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

jamski · 4 November 2016, 09:06 PM

Anyone know if I can put a RubberB strap made for a pre-2011 Explorer II on a 2010 Submariner 14060M no date?

tommy91 · 4 November 2016, 11:03 PM

Yes should be fine, I have year 2000 explorer 2 and 2001 sub and fits Both ��

subtona · 4 November 2016, 11:13 PM

Just did it with my Everest strap (they don't make a strap for the 14060)

I had to cut away the ridge that contacts the bottom of the case.

Looks great together imho.

rollee1 · 5 November 2016, 04:27 AM

No it does not fit, the lug holes position is off on the 14060m.
RubberB makes a different strap for the 14060/14060m case

Tools · 5 November 2016, 09:41 AM

The 14060M does not have the machined lip on the back-side of the case to locate SEL's and some rubber straps.

As mentioned, you would have to cut off the locating tab on the back of those straps that have one, or grind off the lip on the backside of SEL bracelets.

Rubber straps with no locating tab will probably fit without issue..

subtona · 5 November 2016, 02:37 PM

Quote:

Originally Posted by rollee1

No it does not fit, the lug holes position is off on the 14060m.
RubberB makes a different strap for the 14060/14060m case

As I said my strap is from evererest, also designed for the Exp II.

Quote:

Originally Posted by Tools

The 14060M does not have the machined lip on the back-side of the case to locate SEL's and some rubber straps.

As mentioned, you would have to cut off the locating tab on the back of those straps that have one, or grind off the lip on the backside of SEL bracelets.

Rubber straps with no locating tab will probably fit without issue..

I used an exacto knife to cut away the lip. It's not perfect but pretty darn good

4 November 2016, 09:06 PM	#1
jamski "TRF" Member Join Date: Apr 2011 Location: Pittsburgh Posts: 72	RubberB from Explorer II on Submariner? Anyone know if I can put a RubberB strap made for a pre-2011 Explorer II on a 2010 Submariner 14060M no date?

4 November 2016, 11:13 PM	#3
subtona "TRF" Member Join Date: Jan 2011 Real Name: gus Location: East Coast Watch: APK & sometimes Y Posts: 26,599	Just did it with my Everest strap (they don't make a strap for the 14060) I had to cut away the ridge that contacts the bottom of the case. Looks great together imho. Attached Images __________________

5 November 2016, 04:27 AM	#4
rollee1 "TRF" Member Join Date: Jan 2015 Real Name: Rollee Location: Boston Watch: it watching me Posts: 1,945	No it does not fit, the lug holes position is off on the 14060m. RubberB makes a different strap for the 14060/14060m case __________________ Time you enjoy wasting was not wasted

5 November 2016, 09:41 AM	#5
Tools TRF Moderator & 2024 SubLV41 Patron Join Date: May 2007 Real Name: Larry Location: Mojave Desert Watch: GMT's Posts: 43,514	The 14060M does not have the machined lip on the back-side of the case to locate SEL's and some rubber straps. As mentioned, you would have to cut off the locating tab on the back of those straps that have one, or grind off the lip on the backside of SEL bracelets. Rubber straps with no locating tab will probably fit without issue.. __________________ (Chill ... It's just a watch Forum.....) NAWCC Member

4 November 2016, 11:03 PM	#2
tommy91 "TRF" Member Join Date: Apr 2015 Real Name: . Location: . Posts: 1,343	Yes should be fine, I have year 2000 explorer 2 and 2001 sub and fits Both ��

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)