ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

rdb8879 · 12 May 2011, 11:48 AM

Folks,
After asking a few questions about the correct tool to remove the bracelet on the Sub-C,I ordered the Bergeon 6767F. It doesn't seem to easily\properly fit down into the "opening" where the pins are. Did I order the wrong tool? I know some use toothpicks, but the Bergeon has the fork, which would seem to holds the shoulders while you put it back in place. Is there another tool that works besides the $150 pliers? Does the 6111 have smaller forks and will fit easier into the opening?
Thanks

Dr. Robert · 12 May 2011, 11:50 AM

Did you check the Ofrei website...there are a couple of models...one that doesn't fit Rolex & one that does......whatever you do....masking tape.... area so you don't scratch the case/lugs/bracelet.

karmatp · 12 May 2011, 11:35 PM

I have the 6767 F and I have used it to remove bracelets on lots of Rolex watches, but I have never tried on my Sub C.

I'm sure it should work, the F is for fine which is what you need.

Puffy · 12 May 2011, 11:41 PM

Dude do yourself a favour and get the 6825...

12 May 2011, 11:48 AM	#1
rdb8879 Member Join Date: Oct 2010 Real Name: Roger Location: Georgia Watch: 116610LN Posts: 52	Bergeon 6767F-&-Sub-C? Folks, After asking a few questions about the correct tool to remove the bracelet on the Sub-C,I ordered the Bergeon 6767F. It doesn't seem to easily\properly fit down into the "opening" where the pins are. Did I order the wrong tool? I know some use toothpicks, but the Bergeon has the fork, which would seem to holds the shoulders while you put it back in place. Is there another tool that works besides the $150 pliers? Does the 6111 have smaller forks and will fit easier into the opening? Thanks

12 May 2011, 11:50 AM	#2
Dr. Robert 2024 SubLV41 Pledge Member Join Date: Dec 2009 Real Name: Bob Location: U.S.A. Watch: 1655 Posts: 64,256	Did you check the Ofrei website...there are a couple of models...one that doesn't fit Rolex & one that does......whatever you do....masking tape.... area so you don't scratch the case/lugs/bracelet. __________________ Founder & Card Carrying Member of the Global Association of Retro-Grouch-Curmudgeons

12 May 2011, 11:35 PM	#3
karmatp "TRF" Member Join Date: Sep 2007 Real Name: Trevor Location: Arizona Posts: 5,740	I have the 6767 F and I have used it to remove bracelets on lots of Rolex watches, but I have never tried on my Sub C. I'm sure it should work, the F is for fine which is what you need. __________________ My grails:

12 May 2011, 11:41 PM	#4
Puffy "TRF" Member Join Date: Oct 2009 Location: Here and there Posts: 12,485	Dude do yourself a favour and get the 6825... __________________ Fine Quality is Long Remembered After the Pain of Spending Money is Forgotten

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)