ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Watchcollectables · 16 January 2012, 04:04 AM

I have a Genuine Rolex Submariner steel Bezel and insert but Im not sure which model it fits. Are there some measurements available to identify the model or another method to narrow it down?
I can post a pic if needed!
Watchcollector

GradyPhilpott · 16 January 2012, 04:05 AM

Pictures would help.

Mickey® · 16 January 2012, 04:05 AM

Quote:

Originally Posted by watchcollectables

I have a Genuine Rolex Submariner steel Bezel and insert but Im not sure which model it fits. Are there some measurements available to identify the model or another method to narrow it down?
I can post a pic if needed!
Watchcollector

Post a picture and you will know in seconds.

Watchcollectables · 23 January 2012, 12:52 AM

Slight delay but here is a picture of the bezel in question. The pearl is slightly cracked but Tritium.
Thanks
W C

Johny · 23 January 2012, 01:00 AM

Quote:

Originally Posted by watchcollectables

Slight delay but here is a picture of the bezel in question. The pearl is slightly cracked but Tritium.
Thanks
W C

hi can you also post a pic of the underside? thank you.

Watchcollectables · 23 January 2012, 01:08 AM

Here you go.

RolexSA · 23 January 2012, 01:12 AM

I would say 1680 - 5513

Johny · 23 January 2012, 01:15 AM

Quote:

Originally Posted by watchcollectables

Here you go.

great. the earlier ones were bi directional and did not have the teeth.

Watchcollectables · 23 January 2012, 01:19 AM

OK so what does it fit? I was told they vary in diameter depending upon the model. IE 14060/16610/5513 etc.

Johny · 23 January 2012, 01:29 AM

Quote:

Originally Posted by watchcollectables

OK so what does it fit? I was told they vary in diameter depending upon the model. IE 14060/16610/5513 etc.

larry "tools" published a chart with sizes i think. might be in the technical section.

also member "ttmax" has some size/fitting charts in his recent postings.

Watchcollectables · 23 January 2012, 02:32 AM

Thanks but couldnt locate it. Looked through 21 pages of posts searched with the word` bezel` maybe somebody can direct me. Id appreciate it.
W C

Johny · 23 January 2012, 02:49 AM

Quote:

Originally Posted by watchcollectables

Thanks but couldnt locate it. Looked through 21 pages of posts searched with the word` bezel` maybe somebody can direct me. Id appreciate it.
W C

perhaps look through ttmax postings for the last two weeks i think. maybe further back.

Tools · 23 January 2012, 02:52 AM

You will find the insert measurements here..

https://www.rolexforums.com/showthread.php?t=49732

springer · 23 January 2012, 02:55 AM

Try this page on the internet. They have most sizes listed.

http://www.watchgeek.com/bezels.htm

16 January 2012, 04:04 AM	#1
Watchcollectables "TRF" Member Join Date: Jan 2008 Location: UK Posts: 320	Identify Rolex bezel and insert I have a Genuine Rolex Submariner steel Bezel and insert but Im not sure which model it fits. Are there some measurements available to identify the model or another method to narrow it down? I can post a pic if needed! Watchcollector

16 January 2012, 04:05 AM	#2
GradyPhilpott 2024 SubLV41 Pledge Member Join Date: Sep 2008 Location: New Mexico Watch: Seiko #SRK050 Posts: 34,460	Pictures would help. __________________ JJ Inaugural TRF $50 Watch Challenge Winner

23 January 2012, 12:52 AM	#4
Watchcollectables "TRF" Member Join Date: Jan 2008 Location: UK Posts: 320	Slight delay but here is a picture of the bezel in question. The pearl is slightly cracked but Tritium. Thanks W C Attached Images

23 January 2012, 01:08 AM	#6
Watchcollectables "TRF" Member Join Date: Jan 2008 Location: UK Posts: 320	Here you go. Attached Images

23 January 2012, 02:52 AM	#13
Tools TRF Moderator & 2024 SubLV41 Patron Join Date: May 2007 Real Name: Larry Location: Mojave Desert Watch: GMT's Posts: 43,514	You will find the insert measurements here.. https://www.rolexforums.com/showthread.php?t=49732 __________________ (Chill ... It's just a watch Forum.....) NAWCC Member

23 January 2012, 01:12 AM	#7
RolexSA Member Join Date: Aug 2011 Location: Belgium Posts: 318	I would say 1680 - 5513

23 January 2012, 01:19 AM	#9
Watchcollectables "TRF" Member Join Date: Jan 2008 Location: UK Posts: 320	OK so what does it fit? I was told they vary in diameter depending upon the model. IE 14060/16610/5513 etc.

23 January 2012, 02:32 AM	#11
Watchcollectables "TRF" Member Join Date: Jan 2008 Location: UK Posts: 320	Thanks but couldnt locate it. Looked through 21 pages of posts searched with the word` bezel` maybe somebody can direct me. Id appreciate it. W C

23 January 2012, 02:55 AM	#14
springer 2024 SubLV41 Pledge Member Join Date: Apr 2008 Real Name: jP Location: Texas Watch: GMT-MASTER Posts: 17,319	Try this page on the internet. They have most sizes listed. http://www.watchgeek.com/bezels.htm __________________ Member of NAWCC since 1990. INSTAGRAM USER NAME: SPRINGERJFP Visit my Instagram page to view some of the finest vintage GMTs anywhere - as well as other vintage classics.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)