ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

maxutil · 19 March 2016, 05:55 AM

I just got my BLNR yesterday and I'm at work so I don't know if this is mentioned in the manual but maybe someone here can give me some quick guidance.

For the Easylink clasp, you can have the easylink in the on or off position. Basically either closed up or extended. But I notice where the Easylink is connected to the clasp, there are indentations and the bracelet came with it connected to the middle indentation. How do I move it over to another hole/indentation? Do I just pull it toward it? I don't want to damage the watch and pull too hard...

flyingtiger85 · 19 March 2016, 05:59 AM

YouTube is your friend my friend...

RichM · 19 March 2016, 06:06 AM

No, you cannot just move it by pulling it. You need a spring bar tool.

Rookie52 · 19 March 2016, 06:11 AM

Search "Micro Adjustments" here and online.. Lots of info.
Here's a thread I found - http://www.rolexforums.com/showthrea...ighlight=micro

ltmgeller · 19 March 2016, 06:30 AM

Tool required. Best option to avoid scratches.

maxutil · 19 March 2016, 06:35 AM

Ok thank you. I have a spring bar tool at home so I'll do it later. It's just a little too tight with the Easylink extended. Yesterday I tried adding a link and closing the Easylink, but it was too loose. So I think a little micro adjustment here or there will be perfect.

SaddleSC · 19 March 2016, 07:10 AM

The best way to adjust it is to take the screw out of the adjacent link so you can lay the clasp flat (it is always much easier that way) and then use a toothpick (rather than a springbar tool) so that when you inevitably slip off during the first two attempts, you will not damage the surrounding metal.

That is the method that has always worked best for me.

Rookie52 · 19 March 2016, 07:21 AM

Quote:

Originally Posted by maxutil

Ok thank you. I have a spring bar tool at home so I'll do it later. It's just a little too tight with the Easylink extended. Yesterday I tried adding a link and closing the Easylink, but it was too loose. So I think a little micro adjustment here or there will be perfect.

Sounds like the micro will make it just right!

19 March 2016, 05:55 AM	#1
maxutil "TRF" Member Join Date: Mar 2016 Location: Los Angeles Watch: 116710BLNR Posts: 53	3 Holes For EasyLink - How Do I Adjust? I just got my BLNR yesterday and I'm at work so I don't know if this is mentioned in the manual but maybe someone here can give me some quick guidance. For the Easylink clasp, you can have the easylink in the on or off position. Basically either closed up or extended. But I notice where the Easylink is connected to the clasp, there are indentations and the bracelet came with it connected to the middle indentation. How do I move it over to another hole/indentation? Do I just pull it toward it? I don't want to damage the watch and pull too hard...

19 March 2016, 06:06 AM	#3
RichM 2024 SubLV41 Pledge Member Join Date: Mar 2015 Real Name: Richie Location: "Nowhere Man" Watch: out now,take care! Posts: 29,749	No, you cannot just move it by pulling it. You need a spring bar tool. __________________ "I love to work at nothing all day" TRF #139960

19 March 2016, 06:30 AM	#5
ltmgeller 2024 SubLV41 Pledge Member Join Date: Aug 2012 Real Name: Mike Location: New York Watch: Rolex Posts: 22,574	Tool required. Best option to avoid scratches. __________________ Oh, look at the time... Official Member: 'WIS-CON' Las Vegas International GTG 2019

19 March 2016, 07:10 AM	#7
SaddleSC "TRF" Member Join Date: Sep 2010 Real Name: Charles B Location: GMT -7 Watch: Hulk 116610LV Posts: 6,131	The best way to adjust it is to take the screw out of the adjacent link so you can lay the clasp flat (it is always much easier that way) and then use a toothpick (rather than a springbar tool) so that when you inevitably slip off during the first two attempts, you will not damage the surrounding metal. That is the method that has always worked best for me. __________________ Hulk 116610LV + GMT II 126710 BLNR + Explorer 124270 + Air King 126900 + Submariner 16613LB

19 March 2016, 05:59 AM	#2
flyingtiger85 "TRF" Member Join Date: Oct 2015 Location: tejas Watch: Sub Date Posts: 298	YouTube is your friend my friend...

19 March 2016, 06:11 AM	#4
Rookie52 "TRF" Member Join Date: Apr 2015 Location: Toronto Posts: 591	Search "Micro Adjustments" here and online.. Lots of info. Here's a thread I found - http://www.rolexforums.com/showthrea...ighlight=micro

19 March 2016, 06:35 AM	#6
maxutil "TRF" Member Join Date: Mar 2016 Location: Los Angeles Watch: 116710BLNR Posts: 53	Ok thank you. I have a spring bar tool at home so I'll do it later. It's just a little too tight with the Easylink extended. Yesterday I tried adding a link and closing the Easylink, but it was too loose. So I think a little micro adjustment here or there will be perfect.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)