Rolex 16233 tube and crown?

[hunvaakaren]

Hi, i bought a rolex datejust 16233 without the tube. The crown was following the watch.

I had some tubes laying around and i wounder og i have the wrong crown? It does not enter the hole in the tube.

A tube for 1601 that i have fit the crown but is to big for the case. the 16233 tube does fit the case but not the crown

What is the ref for the right crown and tube?


Thanks.

[shofzr]

Tube 24-5330-0
Crown 24-604-3


Sent from my iPhone using Tapatalk

[hunvaakaren]

Thank you very much. Looks like i have a wrong tube then.

[hunvaakaren]

Originally Posted by shofzr

Tube 24-5330-0
Crown 24-604-3


Sent from my iPhone using Tapatalk

Got the new tube, genuine 24-5330-0 tube. Same problem here aswell. The tube fits the case but not the crown. Do I have a wrong crown?

Is the 24-603-3 correct for this tube? Is it 5,3mm? I mesure the crown that I have is 6mm.

https://imgur.com/a/lSCzv
https://imgur.com/a/hoetW

[shofzr]

Originally Posted by hunvaakaren

Got the new tube, genuine 24-5330-0 tube. Same problem here aswell. The tube fits the case but not the crown. Do I have a wrong crown?



Is the 24-603-3 correct for this tube? Is it 5,3mm? I mesure the crown that I have is 6mm.



https://imgur.com/a/lSCzv

https://imgur.com/a/hoetW

If the threads in the crown you have are too big for the 5330 tube , you probably have a 24-600-8 crown




Sent from my iPhone using Tapatalk

[shofzr]

24-600-8
Vs
24-604-8


Sent from my iPhone using Tapatalk

[hunvaakaren]

Originally Posted by shofzr

If the threads in the crown you have are too big for the 5330 tube , you probably have a 24-600-8 crown




Sent from my iPhone using Tapatalk

Check these pics.
Here you can see that the crown "neck" won't enter the hole in the tube. It is too big.
https://imgur.com/a/RsxQP

What crown is this?
https://imgur.com/a/6pX0N


So I need to order a new 24-603-3 crown that will fit this tube and are correct for 16233? Is it a 5,3mm or 6mm?

Thanks for your help.

[shofzr]

Originally Posted by hunvaakaren

Check these pics.

Here you can see that the crown "neck" won't enter the hole in the tube. It is too big.

https://imgur.com/a/RsxQP



What crown is this?

https://imgur.com/a/6pX0N





So I need to order a new 24-603-3 crown that will fit this tube and are correct for 16233? Is it a 5,3mm or 6mm?



Thanks for your help.

The pic looks like a 5330 tube on a 600-8 crown..

16233 uses 24-5330-0 tube and 6mm 24-604-8 crown
(24-603-8 is exactly same size just discontinued )

604-8 = all 18k
604-3= 18k cap..
Both are the same size.


Sent from my iPhone using Tapatalk

[hunvaakaren]

Originally Posted by shofzr

The pic looks like a 5330 tube on a 600-8 crown..

16233 uses 24-5330-0 tube and 6mm 24-604-8 crown
(24-603-8 is exactly same size just discontinued )

604-8 = all 18k
604-3= 18k cap..
Both are the same size.


Sent from my iPhone using Tapatalk

Ok, thank you very much. Got this crown with the watch so i tought it was for this model 16233. What model is the 24-600-8 crown for?

Need to order a 24-603-3 Crown then :-)

[shofzr]

Originally Posted by hunvaakaren

Ok, thank you very much. Got this crown with the watch so i tought it was for this model 16233. What model is the 24-600-8 crown for?



Need to order a 24-603-3 Crown then :-)

Before 24-600 -8 was discounted it was used on
1603
18038
16013 to name a few..


Sent from my iPhone using Tapatalk