ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Dashimmy · 18 November 2017, 03:06 AM

I’m looking to source some knurled pins and tube bushings for a 93150 oyster Bracelet? Does anyone have a source for these?

Sent from my iPhone using Tapatalk

1WatchDawg · 18 November 2017, 05:12 AM

Your AD should be able to order them for you!

Tools · 18 November 2017, 10:06 AM

Quote:

Originally Posted by Dashimmy

I’m looking to source some knurled pins and tube bushings for a 93150 oyster Bracelet? Does anyone have a source for these?

Sent from my iPhone using Tapatalk

I don't think that Rolex considers these to be rebuildable parts. If you measure the center section of the pin, knurling is pretty easy to do. Bushings may be a bit tougher, but most machinist suppliers would have tubing with the inside and outside diameter that you need, you just cut them to fit.

Dashimmy · 18 November 2017, 02:10 PM

Quote:

Originally Posted by Tools

I don't think that Rolex considers these to be rebuildable parts. If you measure the center section of the pin, knurling is pretty easy to do. Bushings may be a bit tougher, but most machinist suppliers would have tubing with the inside and outside diameter that you need, you just cut them to fit.

I have found tubing and 1.4mm SS rods but I am yet to find a knurling tool to do something as small as 1.4mm. Where do you find a hand knurler that small?

MortenSK · 24 November 2017, 03:34 AM

https://www.cousinsuk.com/product/01...le?code=P47258

handsfull · 24 November 2017, 09:37 AM

Quote:

Originally Posted by MortenSK

https://www.cousinsuk.com/product/01...le?code=P47258

nice find!

Dashimmy · 8 December 2017, 05:39 AM

Those Cousins pins are too small. The knurled end is all too small but I did source some pins and tubes. Here are the results.

This is before

And after

It turned out pretty good.

Sent from my iPhone using Tapatalk

Racewatch · 24 January 2018, 09:54 PM

[QUOTE=Dashimmy;8093777]Those Cousins pins are too small. The knurled end is all too small but I did source some pins and tubes. Here are the results.
G]

It turned out pretty good.

where did you find the pins and sleeves/tube you used
thanks for the info

CHAiNS · 4 June 2020, 05:26 PM

Nice work! Would you be willing to divulge what the pin and tube measurements are, and from where you purchased them? Also, by "tube", are you referring to the tube/bushing that is found in 18k models, to prevent excessive wear from the steel knurled pin on the gold center link, or is this yet another type of tube?

alex2235 · 27 March 2021, 04:41 AM

Hello guys

Message for Dashimmy

I have the same problem to find pins and tubes for 93150, where do you find it?
Cousins are too small

Thanks!

uansari1 · 8 December 2017, 05:58 AM

Impressive! What did you use to disassemble the individual links?

Dashimmy · 8 December 2017, 12:00 PM

Quote:

Originally Posted by uansari1

Impressive! What did you use to disassemble the individual links?

A friend and I made a tool.

Sent from my iPhone using Tapatalk

joli160 · 8 December 2017, 08:57 PM

Amazing

:thumbs:

Competition for MY

Fredrik · 9 December 2017, 07:13 AM

Nice!

The tool looks similar to the one Michael Young uses. I remember seeing it in a video he made of his works on bracelets.

trueblackpercula · 21 March 2018, 11:13 PM

awesome

trueblackpercula · 24 March 2018, 12:35 AM

hi after researching to no end ,can you please tell me what size and quantity i need for my two tone submariner 16613- bracelet make is MA1-93253.

I really appreciate it

Michael

suligeo · 9 April 2019, 02:50 AM

Where I can get the Pins if not from cousins?

18 November 2017, 03:06 AM	#1
Dashimmy "TRF" Member Join Date: Aug 2013 Real Name: Heath Location: Elkton Ky Watch: Submariner Posts: 354	I need oysters bracelet pins I’m looking to source some knurled pins and tube bushings for a 93150 oyster Bracelet? Does anyone have a source for these? Sent from my iPhone using Tapatalk

27 March 2021, 04:41 AM	#10
alex2235 "TRF" Member Join Date: Jan 2020 Location: Paris Watch: 5513,1680, 16750 Posts: 1	Pins & Tubes Hello guys Message for Dashimmy I have the same problem to find pins and tubes for 93150, where do you find it? Cousins are too small Thanks!

8 December 2017, 05:58 AM	#11
uansari1 "TRF" Member Join Date: Nov 2013 Location: Doha, Qatar Watch: Polar 16570 Posts: 535	Impressive! What did you use to disassemble the individual links? __________________ Explorer II 16570 Polar (3186) GMT Master II 116710LN GMT Master II 126710BLRO (jubilee) Explorer 124270 Omega Seamaster GMT 50th Anniversary

8 December 2017, 08:57 PM	#13
joli160 2024 SubLV41 Pledge Member Join Date: Apr 2013 Location: NL Watch: Yachtmaster Posts: 14,759	Amazing :thumbs: Competition for MY __________________ Day Date 18238, Yachtmaster 16622, Deepsea 116660, Submariner 116619, SkyD 326935, DJ 178271, DJ 69158, Yachtmaster 169622, GMT 116713LN, GMT 126711.

18 November 2017, 05:12 AM	#2
1WatchDawg "TRF" Member Join Date: Nov 2014 Real Name: Frank Location: GEORGIA Watch: 16610T Sub Date Posts: 413	Your AD should be able to order them for you!

24 November 2017, 03:34 AM	#5
MortenSK "TRF" Member Join Date: Jul 2014 Real Name: Morten Location: Oslo, Norway Posts: 25	https://www.cousinsuk.com/product/01...le?code=P47258

8 December 2017, 05:39 AM	#7
Dashimmy "TRF" Member Join Date: Aug 2013 Real Name: Heath Location: Elkton Ky Watch: Submariner Posts: 354	Those Cousins pins are too small. The knurled end is all too small but I did source some pins and tubes. Here are the results. This is before And after It turned out pretty good. Sent from my iPhone using Tapatalk

24 January 2018, 09:54 PM	#8
Racewatch "TRF" Member Join Date: Jan 2018 Location: oak ridge, tn Posts: 1	[QUOTE=Dashimmy;8093777]Those Cousins pins are too small. The knurled end is all too small but I did source some pins and tubes. Here are the results. G] It turned out pretty good. where did you find the pins and sleeves/tube you used thanks for the info

4 June 2020, 05:26 PM	#9
CHAiNS "TRF" Member Join Date: Jan 2010 Location: Sydney Posts: 4	Nice work! Would you be willing to divulge what the pin and tube measurements are, and from where you purchased them? Also, by "tube", are you referring to the tube/bushing that is found in 18k models, to prevent excessive wear from the steel knurled pin on the gold center link, or is this yet another type of tube?

9 December 2017, 07:13 AM	#14
Fredrik 2024 Pledge Member Join Date: Oct 2011 Location: Sweden Watch: 1680 Posts: 1,874	Nice! The tool looks similar to the one Michael Young uses. I remember seeing it in a video he made of his works on bracelets.

21 March 2018, 11:13 PM	#15
trueblackpercula "TRF" Member Join Date: Feb 2018 Location: usa Posts: 28	awesome

24 March 2018, 12:35 AM	#16
trueblackpercula "TRF" Member Join Date: Feb 2018 Location: usa Posts: 28	hi after researching to no end ,can you please tell me what size and quantity i need for my two tone submariner 16613- bracelet make is MA1-93253. I really appreciate it Michael

9 April 2019, 02:50 AM	#17
suligeo 2024 Pledge Member Join Date: Jun 2013 Location: USA Posts: 599	Where I can get the Pins if not from cousins?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)