ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
|
30 June 2022, 07:25 AM | #1 | |
"TRF" Member
Join Date: Jan 2022
Location: NA
Posts: 2
|
Question about AP RO 33mm Quartz (56303ST)
Hi all, new to this forum.
I'm considering picking up a Royal Oak Quartz 33mm 56303ST with a D-series serial number, but am not sure if it's such a good idea after reading Submarino's sticky. Quote:
Does anyone else have a similar or same model? What's your experience with the 33mm quartz? I love the Royal Oak design, I sincerely don't mind that it's a quartz, the small size fits my small wrists, it's been a grail for many years now, but I'm wondering if the juice is (or is not) worth the squeeze. Thanks in advance! PS: I need a higher count to post links, so I apologize in advance for not providing link references |
|
30 June 2022, 09:46 AM | #2 |
"TRF" Member
Join Date: Jun 2020
Location: Taiwan
Posts: 3,866
|
Looking for a smaller RO opens up a lot of options, new(ish) and vintage. I probably would not go for a 20 yr old quartz watch. I think it's reasonable to expect that AP will keep my mechanical watches in running order for a very long time; not sure if that is true for their quartz offerings if the movement croaks.
|
30 June 2022, 03:43 PM | #3 | |
"TRF" Member
Join Date: Jan 2022
Location: NA
Posts: 2
|
Quote:
For reference, I have a Goldeneye Seamaster (also quartz) from 1995 (which should be older than the D-series right?) that just got back from Omega's service without a hitch. No mention of end of life support, nothing like that at all. Case in point: I can rely on it, and I don't need to service it (baby it) constantly. I'm not the type of person to send a Royal Oak in for polishing for every little scratch, but I do see myself doing a routine service on it every 5-10 years or so (come on seriously, it's a quartz, how much servicing does it even need, right?). Battery swaps shouldn't be that bad. Having to do that every 2-3 years (according to the sticky) is fine, but if it really hard-requires a full movement rebuild each time and AP starts charging me the minimum $600 USD just to even take a look at it, with a real possibility of one day sunsetting support for the movement/other parts, it'll start getting annoying real quick. Thanks for your insight, I appreciate it and would appreciate hearing more! |
|
30 June 2022, 04:39 PM | #4 |
TRF Moderator & 2024 SubLV41 Patron
Join Date: Jul 2013
Real Name: Adam
Location: Far East
Watch: Golden Tuna
Posts: 28,821
|
Speaking of quartz longevity, I have owned several mid and high end Seiko quartz watches that were close to 50 years old and ran just fine. I recently even had a 1978 twin-crystal Seiko Superior that was originally rated at +/-5 secs per year, and still kept to less than +60 secs/year.
Unless you're really set on AP, I'd go with a Grand Seiko 9F movement. They're rated at -/+10 secs a year, and while the oft-mentioned suggestion of no service required for 50 years might be a bit optimistic, you can change the battery yourself every 3 years, or have Seiko do it with a pressure test and new seals for about $50. Case, dial and hand finishing is arguably better, too.
__________________
_______________________ |
1 July 2022, 05:05 AM | #5 | |
"TRF" Member
Join Date: Jul 2020
Location: ---
Posts: 703
|
Quote:
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.